Would this patch merge properly with the other NSP DT clean up patch +
I2C DT patch that you worked out internally but have not sent out?
I thought it's going to make the maintainers' life easier if you can
group DT changes per platform and send them out in the same series.
I also have some inline comments below.
On 11/18/2015 3:13 PM, Jon Mason wrote:
Replace current device tree dummy clocks with real clock support for
Broadcom Northstar Plus SoC
Signed-off-by: Jon Mason <jonmason@xxxxxxxxxxxx>
---
arch/arm/boot/dts/bcm-nsp.dtsi | 99 ++++++++++++++++++++++++++++++++----------
1 file changed, 75 insertions(+), 24 deletions(-)
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 4bcdd28..f85a4f1 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -32,6 +32,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/bcm-nsp.h>
#include "skeleton.dtsi"
@@ -42,7 +43,7 @@
mpcore {
compatible = "simple-bus";
- ranges = <0x00000000 0x19020000 0x00003000>;
+ ranges = <0x00000000 0x19000000 0x00023000>;
Why does this have anything to do with clocks? Shouldn't it be a
separate patch?
#address-cells = <1>;
#size-cells = <1>;
@@ -58,32 +59,23 @@
};
};
- L2: l2-cache {
- compatible = "arm,pl310-cache";
- reg = <0x2000 0x1000>;
- cache-unified;
- cache-level = <2>;
- };
-
- gic: interrupt-controller@19021000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- #address-cells = <0>;
- interrupt-controller;
- reg = <0x1000 0x1000>,
- <0x0100 0x100>;
+ a9pll: arm_clk@19000000 {
+ #clock-cells = <0>;
+ compatible = "brcm,nsp-armpll";
+ clocks = <&osc>;
+ reg = <0x00000 0x1000>;
};
timer@19020200 {
compatible = "arm,cortex-a9-global-timer";
- reg = <0x0200 0x100>;
+ reg = <0x20200 0x100>;
interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&periph_clk>;
};
twd-timer@19020600 {
compatible = "arm,cortex-a9-twd-timer";
- reg = <0x0600 0x20>;
+ reg = <0x20600 0x20>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&periph_clk>;
@@ -91,11 +83,27 @@
twd-watchdog@19020620 {
compatible = "arm,cortex-a9-twd-wdt";
- reg = <0x0620 0x20>;
+ reg = <0x20620 0x20>;
interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&periph_clk>;
};
+
+ gic: interrupt-controller@19021000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x21000 0x1000>,
+ <0x20100 0x100>;
+ };
+
+ L2: l2-cache {
+ compatible = "arm,pl310-cache";
+ reg = <0x22000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
From here and above, all labels are wrong. You are moving them into a
bus that has translated bus addresses, but you still use absolute
addresses for all labels.
And again, 1) Why is this change imbedded in a patch meant for adding DT
clock support according to the commit message; 2) how does the
dependency work with the other patches that you are about to send out?
};
clocks {
@@ -103,10 +111,34 @@
#size-cells = <1>;
ranges;
- periph_clk: periph_clk {
+ osc: oscillator {
+ #clock-cells = <0>;
compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ };
+
+ iprocmed: iprocmed {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ iprocslow: iprocslow {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
+
+ periph_clk: periph_clk {
#clock-cells = <0>;
- clock-frequency = <500000000>;
+ compatible = "fixed-factor-clock";
+ clocks = <&a9pll>;
+ clock-div = <2>;
+ clock-mult = <1>;
};
};
@@ -118,17 +150,17 @@
uart0: serial@18000300 {
compatible = "ns16550a";
- reg = <0x0300 0x100>;
+ reg = <0x000300 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <62499840>;
+ clocks = <&osc>;
status = "disabled";
};
uart1: serial@18000400 {
compatible = "ns16550a";
- reg = <0x0400 0x100>;
+ reg = <0x000400 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <62499840>;
+ clocks = <&osc>;
status = "disabled";
};
@@ -217,5 +249,24 @@
brcm,nand-has-wp;
};
+
+ lcpll0: lcpll0@1803f100 {
wrong label
+ #clock-cells = <1>;
+ compatible = "brcm,nsp-lcpll0";
+ reg = <0x03f100 0x14>;
+ clocks = <&osc>;
+ clock-output-names = "lcpll0", "pcie_phy", "sdio",
+ "ddr_phy";
+ };
+
+ genpll: genpll@1803f140 {
wrong label
+ #clock-cells = <1>;
+ compatible = "brcm,nsp-genpll";
+ reg = <0x03f140 0x24>;
+ clocks = <&osc>;
+ clock-output-names = "genpll", "phy", "ethernetclk",
+ "usbclk", "iprocfast", "sata1",
+ "sata2";
+ };
};
};
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html