Hi Ingi,
Thanks for the update. I have few comments below.
On 11/17/2015 10:04 AM, Ingi Kim wrote:
This patch adds device driver of Richtek RT5033 PMIC.
The RT5033 Flash LED Circuit is designed for one or two LEDs driving
for torch and strobe applications, it provides an I2C software command
to trigger the torch and strobe operation.
Signed-off-by: Ingi Kim <ingi2.kim@xxxxxxxxxxx>
---
drivers/leds/Kconfig | 8 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-rt5033.c | 522 +++++++++++++++++++++++++++++++++++++
include/linux/mfd/rt5033-private.h | 51 ++++
4 files changed, 582 insertions(+)
create mode 100644 drivers/leds/leds-rt5033.c
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index b1ab8bd..f41ac9b 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -345,6 +345,14 @@ config LEDS_PCA963X
LED driver chip accessed via the I2C bus. Supported
devices include PCA9633 and PCA9634
+config LEDS_RT5033
+ tristate "LED support for RT5033 PMIC"
+ depends on LEDS_CLASS_FLASH && OF
+ depends on MFD_RT5033
+ help
+ This option enables support for on-chip LED driver on
+ RT5033 PMIC.
+
config LEDS_WM831X_STATUS
tristate "LED support for status LEDs on WM831x PMICs"
depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index e9d53092..77cfad5 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_LEDS_COBALT_QUBE) += leds-cobalt-qube.o
obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o
obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o
obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o
+obj-$(CONFIG_LEDS_RT5033) += leds-rt5033.o
obj-$(CONFIG_LEDS_GPIO_REGISTER) += leds-gpio-register.o
obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
obj-$(CONFIG_LEDS_LP3944) += leds-lp3944.o
diff --git a/drivers/leds/leds-rt5033.c b/drivers/leds/leds-rt5033.c
new file mode 100644
index 0000000..a28554a
--- /dev/null
+++ b/drivers/leds/leds-rt5033.c
@@ -0,0 +1,522 @@
+/*
+ * led driver for RT5033
+ *
+ * Copyright (C) 2015 Samsung Electronics, Co., Ltd.
+ * Ingi Kim <ingi2.kim@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/led-class-flash.h>
+#include <linux/mfd/rt5033.h>
+#include <linux/mfd/rt5033-private.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+
+#define RT5033_LED_FLASH_TIMEOUT_MIN 64000
+#define RT5033_LED_FLASH_TIMEOUT_STEP 32000
+#define RT5033_LED_FLASH_BRIGHTNESS_MIN 50000
+#define RT5033_LED_FLASH_BRIGHTNESS_MAX_1CH 600000
+#define RT5033_LED_FLASH_BRIGHTNESS_MAX_2CH 800000
+#define RT5033_LED_FLASH_BRIGHTNESS_STEP 25000
+#define RT5033_LED_TORCH_BRIGHTNESS_MIN 12500
+#define RT5033_LED_TORCH_BRIGHTNESS_STEP 12500
+
+/* Macro to get offset of rt5033_led_config_data */
+#define RT5033_LED_CONFIG_DATA_OFFSET(val, step, min) (((val) - (min)) \
+ / (step))
+#define FLED1_IOUT (BIT(0))
+#define FLED2_IOUT (BIT(1))
+
+enum rt5033_fled {
+ FLED1,
+ FLED2,
+};
+
+struct rt5033_sub_led {
+ enum rt5033_fled fled_id;
+ struct led_classdev_flash fled_cdev;
+
+ u32 torch_brightness;
+ u32 flash_brightness;
+ u32 flash_timeout;
+};
+
+/* RT5033 Flash led platform data */
+struct rt5033_led {
+ struct device *dev;
+ struct mutex lock;
+ struct regmap *regmap;
+ struct rt5033_sub_led sub_leds[2];
+
+ bool iout_joint;
+ u8 fled_mask;
+ u8 current_iout;
+};
+
+struct rt5033_led_config_data {
+ const char *label[2];
+ u32 flash_max_microamp[2];
+ u32 flash_max_timeout[2];
+ u32 torch_max_microamp[2];
+ u32 num_leds;
+};
+
+static struct rt5033_sub_led *flcdev_to_sub_led(
+ struct led_classdev_flash *fled_cdev)
+{
+ return container_of(fled_cdev, struct rt5033_sub_led, fled_cdev);
+}
+
+static struct rt5033_led *sub_led_to_led(struct rt5033_sub_led *sub_led)
+{
+ return container_of(sub_led, struct rt5033_led,
+ sub_leds[sub_led->fled_id]);
+}
+
+static bool rt5033_fled_used(struct rt5033_led *led, enum rt5033_fled fled_id)
+{
+ u8 fled_bit = (fled_id == FLED1) ? FLED1_IOUT : FLED2_IOUT;
+
+ return led->fled_mask & fled_bit;
+}
+
+static u8 rt5033_fled_iout_get(struct rt5033_led *led, enum rt5033_fled fled_id)
+{
+ u8 fled_bit;
+
+ if (led->iout_joint)
+ fled_bit = led->fled_mask;
+ else
+ fled_bit = (fled_id == FLED1) ? FLED1_IOUT : FLED2_IOUT;
+
+ return fled_bit;
+}
What is the purpose of this function? It seems to return
a value that is always equal to led->fled_mask, regardless of the
fled_id passed. Just use led->fled_mask directly.
+static int rt5033_led_iout_set_off(struct rt5033_led *led,
+ enum rt5033_fled fled_id)
+{
+ int ret;
+ u8 fled_bit, value;
+
+ fled_bit = rt5033_fled_iout_get(led, fled_id);
+ led->current_iout ^= fled_bit;
+ led->sub_leds[fled_id].fled_cdev.led_cdev.brightness = 0;
+
+ ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION1,
+ RT5033_FLED_FUNC1_MASK,
+ RT5033_FLED_PINCTRL | led->current_iout);
+ if (ret < 0)
+ return ret;
+
+ if (led->current_iout) {
+ value = led->sub_leds[!fled_id].fled_cdev.led_cdev.brightness;
+ ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_CTRL1,
+ RT5033_FLED_CTRL1_MASK,
+ (value - 1) << 4);
+ }
I infer that the purpose of this function is to turn the LED off.
Could you explain why two commands are needed for this?
+ return ret;
+}
+
+static int rt5033_led_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
+ struct rt5033_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
+ struct rt5033_led *led = sub_led_to_led(sub_led);
+ int fled_id = sub_led->fled_id, ret;
+ u8 fled_bit;
+
+ mutex_lock(&led->lock);
+
+ if (!brightness) {
+ ret = rt5033_led_iout_set_off(led, fled_id);
+ goto torch_unlock;
+ }
+
+ fled_bit = rt5033_fled_iout_get(led, fled_id);
+ led->current_iout |= fled_bit;
You don't need fled_bit, just assign the result to led->current_iout.
+
+ ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_CTRL1,
+ RT5033_FLED_CTRL1_MASK, (brightness - 1) << 4);
+ if (ret < 0)
+ goto torch_unlock;
+ ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION1,
+ RT5033_FLED_FUNC1_MASK, RT5033_FLED_PINCTRL |
+ led->current_iout);
+ if (ret < 0)
+ goto torch_unlock;
+ ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION2,
+ RT5033_FLED_FUNC2_MASK, RT5033_FLED_ENFLED);
Could you shortly describe the function of above three registers?
+torch_unlock:
+ mutex_unlock(&led->lock);
+ return ret;
+}
+
+static int rt5033_led_flash_brightness_set(struct led_classdev_flash *fled_cdev,
+ u32 brightness)
+{
+ struct rt5033_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
+ struct rt5033_led *led = sub_led_to_led(sub_led);
+ u32 flash_brightness_offset;
+
+ mutex_lock(&led->lock);
+
+ flash_brightness_offset =
+ RT5033_LED_CONFIG_DATA_OFFSET(sub_led->fled_cdev.brightness.val,
+ sub_led->fled_cdev.brightness.step,
+ sub_led->fled_cdev.brightness.min);
Please align two above lines to the opening parenthesis.
+ sub_led->flash_brightness = flash_brightness_offset;
flash_brightness_offset variable is redundant.
+
+ mutex_unlock(&led->lock);
+
+ return 0;
+}
+
+static int rt5033_led_flash_timeout_set(struct led_classdev_flash *fled_cdev,
+ u32 timeout)
+{
+ struct rt5033_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
+ struct rt5033_led *led = sub_led_to_led(sub_led);
+ u32 flash_tm_offset;
+
+ mutex_lock(&led->lock);
+
+ flash_tm_offset =
+ RT5033_LED_CONFIG_DATA_OFFSET(sub_led->fled_cdev.timeout.val,
+ sub_led->fled_cdev.timeout.step,
+ sub_led->fled_cdev.timeout.min);
+ sub_led->flash_timeout = flash_tm_offset;
flash_tm_offset variable is redundant.
+ mutex_unlock(&led->lock);
+
+ return 0;
+}
+
+static int rt5033_led_flash_strobe_set(struct led_classdev_flash *fled_cdev,
+ bool state)
+{
+ struct rt5033_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
+ struct rt5033_led *led = sub_led_to_led(sub_led);
+ enum rt5033_fled fled_id = sub_led->fled_id;
+ int ret;
+ u8 fled_bit;
+
+ mutex_lock(&led->lock);
+
+ fled_bit = rt5033_fled_iout_get(led, fled_id);
+ led->current_iout |= fled_bit;
+
+ ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION2,
+ RT5033_FLED_FUNC2_MASK, 0);
+ if (ret < 0)
+ goto strobe_unlock;
+
+ if (!state) {
+ ret = rt5033_led_iout_set_off(led, fled_id);
+ goto strobe_unlock;
+ }
+
+ ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_STROBE_CTRL1,
+ RT5033_FLED_STRBCTRL1_MASK,
+ sub_led->flash_brightness);
Does the device allow for setting flash brightness separately for
each iout? Currently it looks like the setting is shared.
+ if (ret < 0)
+ goto strobe_unlock;
+ ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_STROBE_CTRL2,
+ RT5033_FLED_STRBCTRL2_MASK,
+ sub_led->flash_timeout);
+ if (ret < 0)
+ goto strobe_unlock;
+ ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION1,
+ RT5033_FLED_FUNC1_MASK, RT5033_FLED_PINCTRL |
+ RT5033_FLED_STRB_SEL | led->current_iout);
+ if (ret < 0)
+ goto strobe_unlock;
+ ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION2,
+ RT5033_FLED_FUNC2_MASK, RT5033_FLED_ENFLED |
+ RT5033_FLED_SREG_STRB);
+
+ led->current_iout = 0;
+
+strobe_unlock:
+ mutex_unlock(&led->lock);
+ return ret;
+}
+
+static const struct led_flash_ops flash_ops = {
+ .flash_brightness_set = rt5033_led_flash_brightness_set,
+ .strobe_set = rt5033_led_flash_strobe_set,
+ .timeout_set = rt5033_led_flash_timeout_set,
+};
+
+static void rt5033_init_flash_properties(struct rt5033_sub_led *sub_led,
+ struct rt5033_led_config_data *led_cfg)
+{
+ struct led_classdev_flash *fled_cdev = &sub_led->fled_cdev;
+ struct rt5033_led *led = sub_led_to_led(sub_led);
+ struct led_flash_setting *tm_set, *fl_set;
+ enum rt5033_fled fled_id = sub_led->fled_id;
+
+ tm_set = &fled_cdev->timeout;
+ tm_set->min = RT5033_LED_FLASH_TIMEOUT_MIN;
+ tm_set->max = led_cfg->flash_max_timeout[fled_id];
+ tm_set->step = RT5033_LED_FLASH_TIMEOUT_STEP;
+ tm_set->val = tm_set->max;
+
+ fl_set = &fled_cdev->brightness;
+ fl_set->min = RT5033_LED_FLASH_BRIGHTNESS_MIN;
+ if (led->iout_joint)
+ fl_set->max = min(led_cfg->flash_max_microamp[FLED1] +
+ led_cfg->flash_max_microamp[FLED2],
+ (u32)RT5033_LED_FLASH_BRIGHTNESS_MAX_2CH);
+ else
+ fl_set->max = min(led_cfg->flash_max_microamp[fled_id],
+ (u32)RT5033_LED_FLASH_BRIGHTNESS_MAX_1CH);
+ fl_set->step = RT5033_LED_FLASH_BRIGHTNESS_STEP;
+ fl_set->val = fl_set->max;
+}
+
+static void rt5033_led_init_fled_cdev(struct rt5033_sub_led *sub_led,
+ struct rt5033_led_config_data *led_cfg)
+{
+ struct led_classdev_flash *fled_cdev;
+ struct led_classdev *led_cdev;
+ enum rt5033_fled fled_id = sub_led->fled_id;
+ u32 flash_tm_offset, flash_brightness_offset;
+
+ /* Initialize LED Flash class device */
+ fled_cdev = &sub_led->fled_cdev;
+ fled_cdev->ops = &flash_ops;
+ led_cdev = &fled_cdev->led_cdev;
+
+ led_cdev->name = led_cfg->label[fled_id];
+
+ led_cdev->brightness_set_blocking = rt5033_led_brightness_set;
+ led_cdev->max_brightness = RT5033_LED_CONFIG_DATA_OFFSET(
+ led_cfg->torch_max_microamp[fled_id],
+ RT5033_LED_TORCH_BRIGHTNESS_STEP,
+ RT5033_LED_TORCH_BRIGHTNESS_MIN);
+ led_cdev->flags |= LED_DEV_CAP_FLASH;
+
+ rt5033_init_flash_properties(sub_led, led_cfg);
+
+ flash_tm_offset = RT5033_LED_CONFIG_DATA_OFFSET(fled_cdev->timeout.val,
+ fled_cdev->timeout.step,
+ fled_cdev->timeout.min);
+ flash_brightness_offset =
+ RT5033_LED_CONFIG_DATA_OFFSET(fled_cdev->brightness.val,
+ fled_cdev->brightness.step,
+ fled_cdev->brightness.min);
+
+ sub_led->flash_timeout = flash_tm_offset;
+ sub_led->flash_brightness = flash_brightness_offset;
Same here - there is no need for flash_tm_offset and
flash_brightness_offset variables.
+}
+
+static int rt5033_led_parse_dt(struct rt5033_led *led, struct device *dev,
+ struct rt5033_led_config_data *cfg,
+ struct device_node **sub_nodes)
+{
+ struct device_node *np = dev->of_node;
+ struct device_node *child_node;
+ struct rt5033_sub_led *sub_leds = led->sub_leds;
+ struct property *prop;
+ u32 led_sources[2];
+ enum rt5033_fled fled_id;
+ int i, ret;
+
+ for_each_available_child_of_node(np, child_node) {
+ prop = of_find_property(child_node, "led-sources", NULL);
+ if (prop) {
+ const __be32 *srcs = NULL;
+
+ for (i = 0; i < ARRAY_SIZE(led_sources); ++i) {
+ srcs = of_prop_next_u32(prop, srcs,
+ &led_sources[i]);
+ if (!srcs)
+ break;
+ }
+ } else {
+ dev_err(dev, "led-sources DT property missing\n");
+ ret = -EINVAL;
+ goto err_parse_dt;
+ }
+
+ if (i == 2) {
+ fled_id = FLED1;
+ led->fled_mask = FLED1_IOUT | FLED2_IOUT;
+ } else if (led_sources[0] == FLED1) {
+ fled_id = FLED1;
+ led->fled_mask |= FLED1_IOUT;
+ } else if (led_sources[0] == FLED2) {
+ fled_id = FLED2;
+ led->fled_mask |= FLED2_IOUT;
+ } else {
+ dev_err(dev, "Wrong led-sources DT property value.\n");
+ ret = -EINVAL;
+ goto err_parse_dt;
+ }
+
+ if (sub_nodes[fled_id]) {
+ dev_err(dev,
+ "Conflicting \"led-sources\" DT properties\n");
+ ret = -EINVAL;
+ goto err_parse_dt;
+ }
+
+ sub_nodes[fled_id] = child_node;
+ sub_leds[fled_id].fled_id = fled_id;
+
+ cfg->label[fled_id] =
+ of_get_property(child_node, "label", NULL) ? :
+ child_node->name;
+
+ ret = of_property_read_u32(child_node, "led-max-microamp",
+ &cfg->torch_max_microamp[fled_id]);
+ if (ret < 0) {
+ dev_err(dev, "failed to parse led-max-microamp\n");
+ goto err_parse_dt;
+ }
+
+ ret = of_property_read_u32(child_node, "flash-max-microamp",
+ &cfg->flash_max_microamp[fled_id]);
+ if (ret < 0) {
+ dev_err(dev, "failed to parse flash-max-microamp\n");
+ goto err_parse_dt;
+ }
+
+ ret = of_property_read_u32(child_node, "flash-max-timeout-us",
+ &cfg->flash_max_timeout[fled_id]);
+ if (ret < 0) {
+ dev_err(dev, "failed to parse flash-max-timeout-us\n");
+ goto err_parse_dt;
+ }
+
+ if (++cfg->num_leds == 2 ||
+ (rt5033_fled_used(led, FLED1) &&
+ rt5033_fled_used(led, FLED2))) {
+ of_node_put(child_node);
+ break;
+ }
+ }
+
+ if (cfg->num_leds == 0) {
+ dev_err(dev, "No DT child node found for connected LED(s).\n");
+ return -EINVAL;
+ }
+
+ return 0;
+
+err_parse_dt:
+ of_node_put(child_node);
+ return ret;
+}
+
+static int rt5033_led_probe(struct platform_device *pdev)
+{
+ struct rt5033_dev *rt5033 = dev_get_drvdata(pdev->dev.parent);
+ struct rt5033_led *led;
+ struct rt5033_sub_led *sub_leds;
+ struct device_node *sub_nodes[2] = {};
+ struct rt5033_led_config_data led_cfg = {};
+ int init_fled_cdev[2], i, ret;
+
+ led = devm_kzalloc(&pdev->dev, sizeof(*led), GFP_KERNEL);
+ if (!led)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, led);
+ led->dev = &pdev->dev;
+ led->regmap = rt5033->regmap;
+ sub_leds = led->sub_leds;
+
+ ret = rt5033_led_parse_dt(led, &pdev->dev, &led_cfg, sub_nodes);
+ if (ret < 0)
+ return ret;
+
+ if (led_cfg.num_leds == 1 && rt5033_fled_used(led, FLED1) &&
+ rt5033_fled_used(led, FLED2))
+ led->iout_joint = true;
+
+ mutex_init(&led->lock);
+
+ init_fled_cdev[FLED1] =
+ led->iout_joint || rt5033_fled_used(led, FLED1);
+ init_fled_cdev[FLED2] =
+ !led->iout_joint && rt5033_fled_used(led, FLED2);
+
+ for (i = FLED1; i <= FLED2; ++i) {
+ if (!init_fled_cdev[i])
+ continue;
+
+ rt5033_led_init_fled_cdev(&sub_leds[i], &led_cfg);
+ ret = led_classdev_flash_register(led->dev,
+ &sub_leds[i].fled_cdev);
+ if (ret < 0) {
+ if (i == FLED2)
+ goto err_register_led2;
+ else
+ goto err_register_led1;
+ }
+ }
+
+ led->current_iout = 0;
+ ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION1,
+ RT5033_FLED_FUNC1_MASK, RT5033_FLED_RESET);
+ if (ret < 0)
+ dev_dbg(led->dev, "Failed to reset flash led (%d)\n", ret);
+
+ return 0;
+
+err_register_led2:
+ /* It is possible than only FLED2 was to be registered */
+ if (!init_fled_cdev[FLED1])
+ goto err_register_led1;
+ led_classdev_flash_unregister(&sub_leds[FLED1].fled_cdev);
+err_register_led1:
+ mutex_destroy(&led->lock);
+
+ return ret;
+}
+
+static int rt5033_led_remove(struct platform_device *pdev)
+{
+ struct rt5033_led *led = platform_get_drvdata(pdev);
+ struct rt5033_sub_led *sub_leds = led->sub_leds;
+
+ if (led->iout_joint || rt5033_fled_used(led, FLED1))
+ led_classdev_flash_unregister(&sub_leds[FLED1].fled_cdev);
+
+ if (!led->iout_joint && rt5033_fled_used(led, FLED2))
+ led_classdev_flash_unregister(&sub_leds[FLED2].fled_cdev);
+
+ mutex_destroy(&led->lock);
+
+ return 0;
+}
+
+static const struct of_device_id rt5033_led_match[] = {
+ { .compatible = "richtek,rt5033-led", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, rt5033_led_match);
+
+static struct platform_driver rt5033_led_driver = {
+ .driver = {
+ .name = "rt5033-led",
+ .of_match_table = rt5033_led_match,
+ },
+ .probe = rt5033_led_probe,
+ .remove = rt5033_led_remove,
+};
+module_platform_driver(rt5033_led_driver);
+
+MODULE_AUTHOR("Ingi Kim <ingi2.kim@xxxxxxxxxxx>");
+MODULE_DESCRIPTION("Richtek RT5033 LED driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:rt5033-led");
diff --git a/include/linux/mfd/rt5033-private.h b/include/linux/mfd/rt5033-private.h
index 1b63fc2..b20c7e4 100644
--- a/include/linux/mfd/rt5033-private.h
+++ b/include/linux/mfd/rt5033-private.h
@@ -93,6 +93,57 @@ enum rt5033_reg {
#define RT5033_RT_CTRL1_UUG_MASK 0x02
#define RT5033_RT_HZ_MASK 0x01
+/* RT5033 FLED Function1 register */
+#define RT5033_FLED_FUNC1_MASK 0x97
+#define RT5033_FLED_EN_LEDCS1 0x01
+#define RT5033_FLED_EN_LEDCS2 0x02
+#define RT5033_FLED_STRB_SEL 0x04
+#define RT5033_FLED_PINCTRL 0x10
+#define RT5033_FLED_RESET 0x80
+
+/* RT5033 FLED Function2 register */
+#define RT5033_FLED_FUNC2_MASK 0x81
+#define RT5033_FLED_ENFLED 0x01
+#define RT5033_FLED_SREG_STRB 0x80
+
+/* RT5033 FLED Strobe Control1 */
+#define RT5033_FLED_STRBCTRL1_MASK 0xFF
+#define RT5033_FLED_STRBCTRL1_TM_CUR_MAX 0xE0
+#define RT5033_FLED_STRBCTRL1_FL_CUR_DEF 0x0D
+#define RT5033_FLED_STRBCTRL1_FL_CUR_MAX 0x1F
+
+/* RT5033 FLED Strobe Control2 */
+#define RT5033_FLED_STRBCTRL2_MASK 0x3F
+#define RT5033_FLED_STRBCTRL2_TM_DEF 0x0F
+#define RT5033_FLED_STRBCTRL2_TM_MAX 0x3F
+
+/* RT5033 FLED Control1 */
+#define RT5033_FLED_CTRL1_MASK 0xF7
+#define RT5033_FLED_CTRL1_TORCH_CUR_DEF 0x20
+#define RT5033_FLED_CTRL1_TORCH_CUR_MAX 0xF0
+#define RT5033_FLED_CTRL1_LBP_DEF 0x02
+#define RT5033_FLED_CTRL1_LBP_MAX 0x07
+
+/* RT5033 FLED Control2 */
+#define RT5033_FLED_CTRL2_MASK 0xFF
+#define RT5033_FLED_CTRL2_VMID_DEF 0x37
+#define RT5033_FLED_CTRL2_VMID_MAX 0x3F
+#define RT5033_FLED_CTRL2_TRACK_ALIVE 0x40
+#define RT5033_FLED_CTRL2_MID_TRACK 0x80
+
+/* RT5033 FLED Control4 */
+#define RT5033_FLED_CTRL4_MASK 0xE0
+#define RT5033_FLED_CTRL4_RESV 0x14
+#define RT5033_FLED_CTRL4_VTRREG_DEF 0x40
+#define RT5033_FLED_CTRL4_VTRREG_MAX 0x60
+#define RT5033_FLED_CTRL4_TRACK_CLK 0x80
+
+/* RT5033 FLED Control5 */
+#define RT5033_FLED_CTRL5_MASK 0xC0
+#define RT5033_FLED_CTRL5_RESV 0x10
+#define RT5033_FLED_CTRL5_TA_GOOD 0x40
+#define RT5033_FLED_CTRL5_TA_EXIST 0x80
+
/* RT5033 control register */
#define RT5033_CTRL_FCCM_BUCK_MASK 0x00
#define RT5033_CTRL_BUCKOMS_MASK 0x01
--
Best Regards,
Jacek Anaszewski
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
