This patch adds binding doc for Xilinx DWC3 glue driver.
Signed-off-by: Subbaraya Sundeep Bhatta <sbhatta@xxxxxxxxxx>
---
.../devicetree/bindings/usb/dwc3-xilinx.txt | 33 ++++++++++++++++++++++
1 file changed, 33 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/dwc3-xilinx.txt
diff --git a/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt b/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt
new file mode 100644
index 0000000..30361b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt
@@ -0,0 +1,33 @@
+Xilinx SuperSpeed DWC3 USB SoC controller
+
+Required properties:
+- compatible: Should contain "xlnx,zynqmp-dwc3"
+- clocks: A list of phandles for the clocks listed in clock-names
+- clock-names: Should contain the following:
+ "bus_clk" Master/Core clock, have to be >= 125 MHz for SS
+ operation and >= 60MHz for HS operation
+
+ "ref_clk" Clock source to core during PHY power down
+
+Required child node:
+A child node must exist to represent the core DWC3 IP block. The name of
+the node is not important. The content of the node is defined in dwc3.txt.
+
+Example device node:
+
+ usb@0 {
+ #address-cells = <0x2>;
+ #size-cells = <0x1>;
+ status = "okay";
+ compatible = "xlnx,zynqmp-dwc3";
+ clock-names = "bus_clk" "ref_clk";
+ clocks = <&clk125>, <&clk125>;
+ ranges;
+
+ dwc3@fe200000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xfe200000 0x40000>;
+ interrupts = <0x0 0x41 0x4>;
+ dr_mode = "host";
+ };
+ };
--
2.1.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
