Re: [PATCH v7 21/50] powerpc/powernv: Increase PE# capacity

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, Nov 17, 2015 at 11:29:26AM +1100, Daniel Axtens wrote:
>Gavin Shan <gwshan@xxxxxxxxxxxxxxxxxx> writes:
>
>> Each PHB maintains an array helping to translate 2-bytes Request
>> ID (RID) to PE# with the assumption that PE# takes one byte, meaning
>> that we can't have more than 256 PEs. However, pci_dn->pe_number
>> already had 4-bytes for the PE#.
>>
>> This extends the PE# capacity so that each of them will be 4-bytes
>> long. Then we can reuse IODA_INVALID_PE to check the PE# stored in
>> phb->pe_rmap[] is valid or not.
>
>Just for clarity, could you make it clear in the commit message that
>you're increasing the PE# capacity _in the PHB_? I just found it a bit
>confusing the first time I read it.
>
>With that clarified I'll be happy to add my reviewed-by tag.
>

Sure, will add it and thanks for your happiness :-)

>>
>> Signed-off-by: Gavin Shan <gwshan@xxxxxxxxxxxxxxxxxx>
>> ---
>>  arch/powerpc/platforms/powernv/pci-ioda.c | 6 +++++-
>>  arch/powerpc/platforms/powernv/pci.h      | 7 ++-----
>>  2 files changed, 7 insertions(+), 6 deletions(-)
>>
>> diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
>> index 0e66c4d..ef93a01 100644
>> --- a/arch/powerpc/platforms/powernv/pci-ioda.c
>> +++ b/arch/powerpc/platforms/powernv/pci-ioda.c
>> @@ -766,7 +766,7 @@ static int pnv_ioda_deconfigure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
>>  
>>  	/* Clear the reverse map */
>>  	for (rid = pe->rid; rid < rid_end; rid++)
>> -		phb->ioda.pe_rmap[rid] = 0;
>> +		phb->ioda.pe_rmap[rid] = IODA_INVALID_PE;
>>  
>>  	/* Release from all parents PELT-V */
>>  	while (parent) {
>> @@ -3164,6 +3164,10 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
>>  	if (prop32)
>>  		phb->ioda.reserved_pe_idx = be32_to_cpup(prop32);
>>  
>> +	/* Invalidate RID to PE# mapping */
>> +	for (i = 0; i < ARRAY_SIZE(phb->ioda.pe_rmap); ++i)
>> +		phb->ioda.pe_rmap[i] = IODA_INVALID_PE;
>> +
>>  	/* Parse 64-bit MMIO range */
>>  	pnv_ioda_parse_m64_window(phb);
>>  
>> diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
>> index 0802fcd..5df945f 100644
>> --- a/arch/powerpc/platforms/powernv/pci.h
>> +++ b/arch/powerpc/platforms/powernv/pci.h
>> @@ -162,11 +162,8 @@ struct pnv_phb {
>>  			struct list_head	pe_list;
>>  			struct mutex            pe_list_mutex;
>>  
>> -			/* Reverse map of PEs, will have to extend if
>> -			 * we are to support more than 256 PEs, indexed
>> -			 * bus { bus, devfn }
>> -			 */
>> -			unsigned char		pe_rmap[0x10000];
>> +			/* Reverse map of PEs, indexed by {bus, devfn} */
>> +			int			pe_rmap[0x10000];
>>  
>>  			/* TCE cache invalidate registers (physical and
>>  			 * remapped)

Thanks,
Gavin

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux