Hi Stefan,
Sorry for the delay.
El 03/11/15 a las 05:20, Stefan Wahren escribió:
> Hi Ariel,
>
> Am 19.10.2015 um 19:32 schrieb Ariel D'Alessandro:
>> This commit adds support for NXP LPC18xx EEPROM memory found in NXP
>> LPC185x/3x and LPC435x/3x/2x/1x devices.
>>
>> EEPROM size is 16384 bytes and it can be entirely read and
>> written/erased with 1 word (4 bytes) granularity. The last page
>> (128 bytes) contains the EEPROM initialization data and is not writable.
>>
>> Erase/program time is less than 3ms. The EEPROM device requires a
>> ~1500 kHz clock (min 800 kHz, max 1600 kHz) that is generated dividing
>> the system bus clock by the division factor, contained in the divider
>> register (minus 1 encoded).
>>
>> Signed-off-by: Ariel D'Alessandro <ariel@xxxxxxxxxxxxxxxxxxxx>
>> ---
>> drivers/nvmem/Kconfig | 9 ++
>> drivers/nvmem/Makefile | 2 +
>> drivers/nvmem/lpc18xx_eeprom.c | 266 +++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 277 insertions(+)
>> create mode 100644 drivers/nvmem/lpc18xx_eeprom.c
>> [...]
>> +
>> +static int lpc18xx_eeprom_gather_write(void *context, const void *reg,
>> + size_t reg_size, const void *val,
>> + size_t val_size)
>> +{
>> + struct lpc18xx_eeprom_dev *eeprom = context;
>> + unsigned int offset = *(u32 *)reg;
>> +
>> + /* 3 ms of erase/program time between each writing */
>> + while (val_size) {
>> + writel(*(u32 *)val, eeprom->mem_base + offset);
>> + usleep_range(3000, 4000);
>
> i think it would be good to verify that the EEPROM write operation has
> really finished.
I'm not sure what are you proposing. Why could the write operation not
finish?
--
Ariel D'Alessandro, VanguardiaSur
www.vanguardiasur.com.ar
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
