Am Dienstag, den 10.11.2015, 13:00 -0500 schrieb Akshay Bhat: > Add support for Advantech/GE B450v3 board. > > Signed-off-by: Akshay Bhat <akshay.bhat@xxxxxxxxxxx> > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/imx6q-b450v3.dts | 75 ++++++++++++++++++++++++++++++++++++++ > 2 files changed, 76 insertions(+) > create mode 100644 arch/arm/boot/dts/imx6q-b450v3.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 30bbc37..b3330fe 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -310,6 +310,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ > imx6dl-wandboard-revb1.dtb \ > imx6q-apf6dev.dtb \ > imx6q-arm2.dtb \ > + imx6q-b450v3.dtb \ > imx6q-cm-fx6.dtb \ > imx6q-cubox-i.dtb \ > imx6q-dfi-fs700-m60.dtb \ > diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts > new file mode 100644 > index 0000000..919e4a4 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6q-b450v3.dts > @@ -0,0 +1,75 @@ > +/* > + * Copyright 2015 Timesys Corporation. > + * Copyright 2015 General Electric Company > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 or later at the following locations: > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ > + > +/dts-v1/; > + > +#include "imx6q-bx50v3.dtsi" > + > +/ { > + model = "Advantech MX6Q B450V3 QSeven Board"; > + compatible = "ge,imx6q-b450v3", "advantech,imx6q-ba16", "fsl,imx6q"; > + > + chosen { > + stdout-path = &uart3; > + }; > +}; > + > +&ldb { > + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, > + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; > + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, > + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; > + status = "okay"; > + > + lvds0: lvds-channel@0 { > + fsl,data-mapping = "spwg"; > + fsl,data-width = <24>; > + status = "okay"; > + > + display-timings { > + native-mode = <&timing0>; > + timing0: G121X1-L03 { > + clock-frequency = <65000000>; > + hactive = <1024>; > + vactive = <768>; > + hback-porch = <320>; > + hfront-porch = <0>; > + vback-porch = <0>; > + vfront-porch = <38>; > + hsync-len = <1>; > + vsync-len = <1>; > + }; > + }; Display timings in DT are deprecated and new boards should add the display with a specific compatible to the simple-panel driver and then link a panel node to the LVDS channels. Take a look at the i.MX6 Nitrogen DTs for an example on how to do this. Same comment applies to the next patches as well. > + }; > + > + lvds1: lvds-channel@1 { > + fsl,data-mapping = "spwg"; > + fsl,data-width = <24>; > + status = "okay"; > + > + display-timings { > + native-mode = <&timing1>; > + timing1: G121X1-L03 { > + clock-frequency = <65000000>; > + hactive = <1024>; > + vactive = <768>; > + hback-porch = <320>; > + hfront-porch = <0>; > + vback-porch = <0>; > + vfront-porch = <38>; > + hsync-len = <1>; > + vsync-len = <1>; > + }; > + }; > + }; > + > +}; -- Pengutronix e.K. | Lucas Stach | Industrial Linux Solutions | http://www.pengutronix.de/ | -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
