The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter designed for portable devices. You can add support to your board with current binding. Example: anx7814: anx7814@38 { compatible = "analogix,anx7814"; reg = <0x38>; pd-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; }; Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx> --- .../devicetree/bindings/video/bridge/anx7814.txt | 36 ++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/video/bridge/anx7814.txt diff --git a/Documentation/devicetree/bindings/video/bridge/anx7814.txt b/Documentation/devicetree/bindings/video/bridge/anx7814.txt new file mode 100644 index 0000000..f7bdca9 --- /dev/null +++ b/Documentation/devicetree/bindings/video/bridge/anx7814.txt @@ -0,0 +1,36 @@ +Analogix ANX7814 SlimPort (Full-HD Transmitter) +----------------------------------------------- + +The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter +designed for portable devices. + +Required properties: + + - compatible : "analogix,anx7814" + - reg : I2C address of the device + - cable-det-gpios : Which GPIO to use for cable detection + - pd-gpios : Which GPIO to use for power down + - reset-gpios : Which GPIO to use for reset + +Optional properties: + + - v10-gpios : Which GPIO to use for V10 control. + - video interfaces: Device node can contain video interface port nodes. + +Example: + + anx7814: anx7814@38 { + compatible = "analogix,anx7814"; + reg = <0x38>; + cable-det-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + pd-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; + v10-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; + ports { + port@0 { + anx7814_in: endpoint { + remote-endpoint = <&hdmi0_out>; + }; + }; + }; + }; -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html