Hi Uri, On 10/27/15 14:14, Uri Mashiach wrote: > From: Ilya Ledvich <ilya@xxxxxxxxxxxxxx> > > Add basic support for CompuLab cm-t335 module based on AM335X SoC. > > CM-T335 is a tiny computer-on-module (CoM) / system-on-module (SoM) > The module is built around the Texas Instruments Sitara AM3352/4 > system-on-chip. > > The CPU is supplemented with up-to 512MB DDR3 and up-to 1GB of on-board > NAND storage, WiFi connected to SPI, Bluetooth, Analog audio, Gigabit > Ethernet, CAN bus. > > Current patch adds support: > UART0 and GPIO LED > > Detailed description can be found at the module site: > http://www.compulab.co.il/products/computer-on-modules/cm-t335/ [...] > diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts > new file mode 100644 > index 0000000..197d5ce > --- /dev/null > +++ b/arch/arm/boot/dts/am335x-cm-t335.dts > @@ -0,0 +1,62 @@ [...] > +&am33xx_pinmux { > + pinctrl-names = "default"; > + pinctrl-0 = <>; > + > + gpio_led_pins: pinmux_gpio_led_pins { > + pinctrl-single,pins = < > + 0x88 (PIN_OUTPUT | MUX_MODE7) /* gpmc_csn3.gpio2_0 */ > + >; > + }; > + > + uart0_pins: pinmux_uart0_pins { > + pinctrl-single,pins = < > + /* uart0_rxd.uart0_rxd */ > + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) > + /* uart0_txd.uart0_txd */ > + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) Can we use AM33XX_IOPAD macro here? and may be other patches too? [...] -- Regards, Igor. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
