Re: [PATCH v7 11/50] powerpc/powernv: IO and M32 mapping based on PCI device resources

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Gavin,

Sorry to have taken so long to resume these reviews!

> Currently, the IO and M32 segments are mapped to the corresponding
> PE based on the windows of the parent bridge of PE's primary bus.
> It's not going to work when the windows of root port or upstream
> port of the PCIe switch behind root port are extended to PHB's
> aperatuses in order to support hotplug in subsequent patch.
I'm not _entirely_ sure I understand this.

I *think* you mean PHB's apertures (i.e. s/aperatuses/apertures/)?

> This fixes the issue by mapping IO and M32 segments based on the
> resources of the PCI devices included in the PE, instead of the
> windows of the parent bridge of the PE's primary bus.

This solution seems to make a lot of sense, but I don't have a very good
understanding of PCI yet: why was it done that way and not this way
originally? Looking at the code, it looks like the old way was simple
but didn't support SR-IOV?

There are a few comments inline as well.

> diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
> index 553d3f3..4ab93f8 100644
> --- a/arch/powerpc/platforms/powernv/pci-ioda.c
> +++ b/arch/powerpc/platforms/powernv/pci-ioda.c
> @@ -2741,71 +2741,90 @@ truncate_iov:
>  }
>  #endif /* CONFIG_PCI_IOV */
>  
> -/*
> - * This function is supposed to be called on basis of PE from top
> - * to bottom style. So the the I/O or MMIO segment assigned to
> - * parent PE could be overrided by its child PEs if necessary.
> - */
> -static void pnv_ioda_setup_pe_seg(struct pci_controller *hose,
> -				  struct pnv_ioda_pe *pe)
> +static int pnv_ioda_setup_one_res(struct pnv_ioda_pe *pe,
> +				  struct resource *res)
>  {
> -	struct pnv_phb *phb = hose->private_data;
> +	struct pnv_phb *phb = pe->phb;
>  	struct pci_bus_region region;
> -	struct resource *res;
> -	unsigned int segsize;
> -	int *segmap, index, i;
> +	unsigned int index, segsize;
> +	int *segmap;
>  	uint16_t win;
>  	int64_t rc;

s/int64_t/s64/;
I think we might also want to change the uint16_t as well.

> -	/*
> -	 * NOTE: We only care PCI bus based PE for now. For PCI
> -	 * device based PE, for example SRIOV sensitive VF should
> -	 * be figured out later.
> -	 */
> -	BUG_ON(!(pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL)));
> +	if (!res->parent || !res->flags || res->start > res->end)
> +		return 0;
>  
> -	pci_bus_for_each_resource(pe->pbus, res, i) {
> -		if (!res || !res->flags ||
> -		    res->start > res->end)
> -			continue;
> +	if (res->flags & IORESOURCE_IO) {
> +		region.start = res->start - phb->ioda.io_pci_base;
> +		region.end   = res->end - phb->ioda.io_pci_base;
> +		segsize      = phb->ioda.io_segsize;
> +		segmap       = phb->ioda.io_segmap;
> +		win          = OPAL_IO_WINDOW_TYPE;
> +	} else if ((res->flags & IORESOURCE_MEM) &&
> +		   !pnv_pci_is_mem_pref_64(res->flags)) {
> +		region.start = res->start -
> +			       phb->hose->mem_offset[0] -
> +			       phb->ioda.m32_pci_base;
> +		region.end   = res->end -
> +			       phb->hose->mem_offset[0] -
> +			       phb->ioda.m32_pci_base;
> +		segsize      = phb->ioda.m32_segsize;
> +		segmap       = phb->ioda.m32_segmap;
> +		win          = OPAL_M32_WINDOW_TYPE;
> +	} else {
> +		return 0;
The return codes are currently unused, but should this get a more
informative return code? Are there any invalid ones that should be
flagged, or is it just safe to ignore stuff we don't recognise?

> +	}


> +static void pnv_ioda_setup_pe_seg(struct pnv_ioda_pe *pe)
> +{
> +	struct pci_dev *pdev;
> +	struct resource *res;
> +	int i;
> +
> +	/* This function only works for bus dependent PE */
> +	WARN_ON(!(pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL)));
> +
> +	list_for_each_entry(pdev, &pe->pbus->devices, bus_list) {
> +		for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
> +			res = &pdev->resource[i];
> +			if (pnv_ioda_setup_one_res(pe, res))
> +				return;
As I mentioned earlier, setup_one_res can potentially return -EIO:
should we be trying to propagate that up?
> +		}
> +
> +		/*
> +		 * If the PE contains all subordinate PCI buses, the
> +		 * windows of the child bridges should be mapped to
> +		 * the PE as well.
> +		 */
> +		if (!(pe->flags & PNV_IODA_PE_BUS_ALL && pci_is_bridge(pdev)))
> +			continue;
>  
> -			region.start += segsize;
> -			index++;
> +		for (i = 0; i <= PCI_BRIDGE_RESOURCE_NUM; i++) {
> +			res = &pdev->resource[PCI_BRIDGE_RESOURCES + i];
> +			if (pnv_ioda_setup_one_res(pe, res))
> +				return;
>  		}
>  	}
>  }

Regards,
Daniel

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux