Hi, This patchset contains audio support for Broadcom's Cygnus SoC. It contains DT bindings and core audio driver. The audio driver supports both capture and playback of Audio PCM samples over I2S/TDM interface and provides playback support over SPDIF interface. This patchset is derived from a previously submitted patchset: http://lkml.iu.edu/hypermail/linux/kernel/1503.3/05434.html This patchset has been tested on Cygnus wireless audio bcm958305K board. It is based on v4.3-rc5 and is available from github: repo: https://github.com/Broadcom/cygnus-linux/tree/cygnus-sound-v3 Changes from v2: - Split patchset 2/2 from v2 into patchsets 2/3 and 3/3. - Remove SND_SOC_CYGNUS_DIAG. Diagnostics can be performed using standard kernel trace infrastructure. - Fix interrupt handler. Acknowledge only those interrupts that are handledby ISR. - Modify configure_vco() and the pll_macro_entry() struct to make it better readable. The functionality did not change. - Remove casts on macros - Removed surround sound channel grouping from the driver. Simran Rai (3): dt-bindings: sound: Add DT bindings for Broadcom Cygnus audio sound: soc: Add Cygnus audio DAI driver sound: soc: Add Cygnus audio DMA driver .../bindings/sound/brcm,cygnus-audio.txt | 54 + sound/soc/bcm/Kconfig | 9 + sound/soc/bcm/Makefile | 5 + sound/soc/bcm/cygnus-pcm.c | 859 +++++++++++ sound/soc/bcm/cygnus-ssp.c | 1508 ++++++++++++++++++++ sound/soc/bcm/cygnus-ssp.h | 129 ++ 6 files changed, 2564 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt create mode 100644 sound/soc/bcm/cygnus-pcm.c create mode 100644 sound/soc/bcm/cygnus-ssp.c create mode 100644 sound/soc/bcm/cygnus-ssp.h -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
