[RFC 3/3] ARM: e3xx: Add header file for pinctrl constants

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




This new header file defines pincontrol constants for USRP E3xx to
use from E3xx's DTS file for pincontrol properties option.

Signed-off-by: Moritz Fischer <moritz.fischer@xxxxxxxxx>
---
 include/dt-bindings/pinctrl/pinctrl-e3xx.h | 142 +++++++++++++++++++++++++++++
 1 file changed, 142 insertions(+)
 create mode 100644 include/dt-bindings/pinctrl/pinctrl-e3xx.h

diff --git a/include/dt-bindings/pinctrl/pinctrl-e3xx.h b/include/dt-bindings/pinctrl/pinctrl-e3xx.h
new file mode 100644
index 0000000..7b35ad2
--- /dev/null
+++ b/include/dt-bindings/pinctrl/pinctrl-e3xx.h
@@ -0,0 +1,142 @@
+/*
+ * Copyright (C) 2015 National Instruments Corp
+ *
+ * This header provides constants for USRP E3xx pinctrl bindings
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+#ifndef _DT_BINDINGS_PINCTRL_E3XX_H
+#define _DT_BINDINGS_PINCTRL_E3XX_H
+
+/* Pin names for the E31x usecase */
+#define E31X_TX_BANDSEL_2	"DB_1"
+#define E31X_RX1B_BANDSEL_0	"DB_3"
+#define E31X_RX1B_BANDSEL_1	"DB_5"
+#define E31X_VCTXRX2_V2		"DB_7"
+#define E31X_TX_ENABLE1A	"DB_9"
+#define E31X_TX_ENABLE2A	"DB_11"
+#define E31X_TX_BANDSEL_0	"DB_12"
+#define E31X_TX_ENABLE1B	"DB_13"
+#define E31X_TX_ENABLE2B	"DB_15"
+#define E31X_RX1C_BANDSEL_0	"DB_17"
+#define E31X_RX1C_BANDSEL_1	"DB_19"
+#define E31X_VCTXRX2_V1		"DB_21"
+#define E31X_VCTXRX1_V2		"DB_23"
+#define E31X_VCTXRX1_V1		"DB_25"
+#define E31X_VCRX1_V1		"DB_27"
+#define E31X_VCRX1_V2		"DB_29"
+#define E31X_VCRX2_V1		"DB_31"
+#define E31X_VCRX2_V2		"DB_33"
+#define E31X_CAT_CTRL_IN2	"DB_35"
+#define E31X_CAT_CTRL_IN3	"DB_37"
+#define E31X_CAT_CTRL_OUT0	"DB_39"
+#define E31X_CAT_CTRL_OUT1	"DB_41"
+#define E31X_CAT_CTRL_OUT2	"DB_43"
+#define E31X_CAT_CTRL_OUT3	"DB_45"
+/* pin 47 is nc */
+/* pin 49 is nc */
+/* pin 51 is nc */
+/* pin 53 is nc */
+/* pin 55 is nc */
+/* pin 57 is nc */
+/* pin 59 is nc */
+/* pin 61 is nc */
+/* pin 63 is nc */
+/* pin 65 is nc */
+#define E31X_CAT_TXNRX		"DB_67"
+#define E31X_CAT_ENABLE		"DB_69"
+#define E31X_CAT_ENAGC		"DB_71"
+/* pin 73 is nc */
+#define E31X_CAT_P0_D5		"DB_75"
+#define E31X_CAT_P0_D7		"DB_77"
+#define E31X_CAT_P0_D3		"DB_79"
+#define E31X_CAT_P0_D9		"DB_81"
+#define E31X_CAT_P0_D1		"DB_83"
+#define E31X_CAT_P0_D6		"DB_85"
+#define E31X_CAT_P0_D0		"DB_87"
+#define E31X_CAT_P0_D2		"DB_89"
+#define E31X_CAT_P0_D4		"DB_91"
+#define E31X_CAT_P0_D11		"DB_93"
+#define E31X_CAT_P0_D10		"DB_95"
+#define E31X_CAT_P0_D8		"DB_97"
+#define E31X_CAT_RX_FRAME	"DB_99"
+#define E31X_CAT_DATA_CLK	"DB_101"
+/* pin 103 is nc */
+/* pin 105 is nc */
+#define E31X_RX2_BANDSEL_2	"DB_107"
+#define E31X_RX2_BANDSEL_1	"DB_109"
+#define E31X_RX2_BANDSEL_0	"DB_111"
+#define E31X_RX2C_BANDSEL_1	"DB_113"
+#define E31X_RX2C_BANDSEL_0	"DB_115"
+#define E31X_RX2B_BANDSEL_0	"DB_117"
+#define E31X_RX2B_BANDSEL_1	"DB_119"
+
+/* pin 2 is nc */
+/* pin 4 is nc */
+#define E31X_RX1_BANDSEL_0	"DB_6"
+#define E31X_RX1_BANDSEL_1	"DB_8"
+#define E31X_RX1_BANDSEL_2	"DB_10"
+#define E31X_TX_BANDSEL_1	"DB_14"
+#define E31X_DB_SCL		"DB_16"
+#define E31X_DB_SCA		"DB_18"
+#define E31X_TUNE_DAC_SYNC_N	"DB_20"
+#define E31X_TUNE_DAC_SCLK	"DB_22"
+#define E31X_TUNE_DAC_SDIN	"DB_24"
+/* pin 26 is nc */
+/* pin 28 is nc */
+#define E31X_VCTCXO_TO_MB	"DB_30"
+/* pin 32 is nc */
+/* pin 34 is nc */
+/* pin 36 is nc */
+/* pin 38 is nc */
+#define E31X_CAT_CTRL_OUT4	"DB_40"
+#define E31X_CAT_CTRL_OUT5	"DB_42"
+#define E31X_CAT_CTRL_OUT6	"DB_44"
+#define E31X_CAT_CTRL_OUT7	"DB_46"
+#define E31X_CAT_RESET		"DB_48"
+#define E31X_CAT_CS		"DB_50"
+#define E31X_CAT_SCLK		"DB_52"
+#define E31X_CAT_MOSI		"DB_54"
+#define E31X_CAT_MISO		"DB_56"
+#define E31X_CAT_CTRL_IN0	"DB_58"
+#define E31X_CAT_CTRL_IN1	"DB_60"
+/* pin 62 is nc */
+/* pin 64 is nc */
+/* pin 66 is nc */
+/* pin 68 is nc */
+#define E31X_CAT_BBCLK_OUT	"DB_70"
+/* pin 72 is nc */
+#define E31X_CAT_SYNC		"DB_74"
+#define E31X_CAT_P1_D11		"DB_78"
+#define E31X_CAT_P1_D1		"DB_80"
+#define E31X_CAT_P1_D3		"DB_82"
+#define E31X_CAT_P1_D0		"DB_84"
+#define E31X_CAT_P1_D5		"DB_86"
+#define E31X_CAT_P1_D2		"DB_88"
+#define E31X_CAT_P1_D4		"DB_90"
+#define E31X_CAT_P1_D7		"DB_92"
+#define E31X_CAT_P1_D6		"DB_94"
+#define E31X_CAT_P1_D9		"DB_96"
+#define E31X_CAT_P1_D8		"DB_98"
+#define E31X_CAT_P1_D10		"DB_100"
+#define E31X_CAT_TX_FRAME	"DB_102"
+#define E31X_CAT_FB_CLK		"DB_104"
+/* pin 106 is nc */
+#define E31X_LED_TXRX1_TX	"DB_108"
+#define E31X_LED_TXRX1_RX	"DB_110"
+#define E31X_LED_RX1_RX		"DB_112"
+#define E31X_LED_TXRX2_TX	"DB_114"
+#define E31X_LED_TXRX2_RX	"DB_116"
+#define E31X_LED_RX2_RX		"DB_118"
+/* pin 120 is nc */
+
+#endif /* _DT_BINDINGS_PINCTRL_E3XX_H */
-- 
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux