Re: [PATCH v7 10/50] powerpc/powernv: Simplify pnv_ioda_setup_pe_seg()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Gavin Shan <gwshan@xxxxxxxxxxxxxxxxxx> writes:

> The original implementation of pnv_ioda_setup_pe_seg() configures
> IO and M32 segments by separate logics, which can be merged by
> by caching @segmap, @seg_size, @win in advance. This shouldn't
> cause any behavioural changes.
>
> Signed-off-by: Gavin Shan <gwshan@xxxxxxxxxxxxxxxxxx>
> ---
>  arch/powerpc/platforms/powernv/pci-ioda.c | 62 ++++++++++++++-----------------
>  1 file changed, 28 insertions(+), 34 deletions(-)
>
> diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
> index 7ee7cfe..553d3f3 100644
> --- a/arch/powerpc/platforms/powernv/pci-ioda.c
> +++ b/arch/powerpc/platforms/powernv/pci-ioda.c
> @@ -2752,8 +2752,10 @@ static void pnv_ioda_setup_pe_seg(struct pci_controller *hose,
>  	struct pnv_phb *phb = hose->private_data;
>  	struct pci_bus_region region;
>  	struct resource *res;
> -	int i, index;
> -	int rc;
> +	unsigned int segsize;
> +	int *segmap, index, i;
> +	uint16_t win;
> +	int64_t rc;

Good catch! Opal return codes are 64 bit and that should be explicit
in the type. However, I seem to remember that we preferred a different
type for 64 bit ints in the kernel. I think it's s64, and there are some
other uses of that in pci_ioda.c for return codes.

(I'm actually surprised that's not picked up as a compiler
warning. Maybe that's something to look at in future.)

The rest of the patch looks good on casual inspection - to be sure I'll
test the entire series on a machine. (hopefully, time permitting!)

Regards,
Daniel

>  
>  	/*
>  	 * NOTE: We only care PCI bus based PE for now. For PCI
> @@ -2770,23 +2772,9 @@ static void pnv_ioda_setup_pe_seg(struct pci_controller *hose,
>  		if (res->flags & IORESOURCE_IO) {
>  			region.start = res->start - phb->ioda.io_pci_base;
>  			region.end   = res->end - phb->ioda.io_pci_base;
> -			index = region.start / phb->ioda.io_segsize;
> -
> -			while (index < phb->ioda.total_pe_num &&
> -			       region.start <= region.end) {
> -				phb->ioda.io_segmap[index] = pe->pe_number;
> -				rc = opal_pci_map_pe_mmio_window(phb->opal_id,
> -					pe->pe_number, OPAL_IO_WINDOW_TYPE, 0, index);
> -				if (rc != OPAL_SUCCESS) {
> -					pr_err("%s: OPAL error %d when mapping IO "
> -					       "segment #%d to PE#%d\n",
> -					       __func__, rc, index, pe->pe_number);
> -					break;
> -				}
> -
> -				region.start += phb->ioda.io_segsize;
> -				index++;
> -			}
> +			segsize      = phb->ioda.io_segsize;
> +			segmap       = phb->ioda.io_segmap;
> +			win          = OPAL_IO_WINDOW_TYPE;
>  		} else if ((res->flags & IORESOURCE_MEM) &&
>  			   !pnv_pci_is_mem_pref_64(res->flags)) {
>  			region.start = res->start -
> @@ -2795,23 +2783,29 @@ static void pnv_ioda_setup_pe_seg(struct pci_controller *hose,
>  			region.end   = res->end -
>  				       hose->mem_offset[0] -
>  				       phb->ioda.m32_pci_base;
> -			index = region.start / phb->ioda.m32_segsize;
> -
> -			while (index < phb->ioda.total_pe_num &&
> -			       region.start <= region.end) {
> -				phb->ioda.m32_segmap[index] = pe->pe_number;
> -				rc = opal_pci_map_pe_mmio_window(phb->opal_id,
> -					pe->pe_number, OPAL_M32_WINDOW_TYPE, 0, index);
> -				if (rc != OPAL_SUCCESS) {
> -					pr_err("%s: OPAL error %d when mapping M32 "
> -					       "segment#%d to PE#%d",
> -					       __func__, rc, index, pe->pe_number);
> -					break;
> -				}
> +			segsize      = phb->ioda.m32_segsize;
> +			segmap       = phb->ioda.m32_segmap;
> +			win          = OPAL_M32_WINDOW_TYPE;
> +		} else {
> +			continue;
> +		}
>  
> -				region.start += phb->ioda.m32_segsize;
> -				index++;
> +		index = region.start / segsize;
> +		while (index < phb->ioda.total_pe_num &&
> +		       region.start <= region.end) {
> +			segmap[index] = pe->pe_number;
> +			rc = opal_pci_map_pe_mmio_window(phb->opal_id,
> +					pe->pe_number, win, 0, index);
> +			if (rc != OPAL_SUCCESS) {
> +				pr_warn("%s: Error %lld mapping (%d) seg#%d to PHB#%d-PE#%d\n",
> +					__func__, rc, win, index,
> +					pe->phb->hose->global_number,
> +					pe->pe_number);
> +				break;
>  			}
> +
> +			region.start += segsize;
> +			index++;
>  		}
>  	}
>  }
> -- 
> 2.1.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux