Re: [PATCH v2] mfd: arizona: Add DT binding for irq-gpios property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 03/11/2015 17:52, Charles Keepax wrote:
On Tue, Nov 03, 2015 at 03:04:50PM +0000, Mark Brown wrote:
On Tue, Nov 03, 2015 at 03:10:06PM +0100, Sebastien Jan wrote:

+  - irq-gpios : GPIO specifier for the GPIO connected to /IRQ
The platform data this is providing is essentially a workaround for the
lack of an irq_to_gpio() function and the use of it is a workaround for
the lack of level triggered IRQ emulation in genirq...  do we really
want this in the ABI (especially as a generic thing)?
Personally I would rather not add this to the DT unless we really
had to.

Also are you sure this is necessary on your system? Specifically
you only need this entry if the CODEC is connected to an IRQ line
that only supports edge triggered IRQs.

Mark, Charles, thanks for pointing me to this information.

I don't have this specific constraint on my system and could finally also have it working using the regular interrupts / interrup-parent properties.

So this new binding is not required for my case. I suppose we can forget about it.

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux