From: Harninder Rai <harninder.rai@xxxxxxxxxxxxx> 1. Use machine_arch_initcall to hook mpc85xx_common_publish_devices This can ensure before pcibios_init() is called, pci controllers have been probed and added to the hose_list. 2. Add a workaround for errata A-005434 For the BSC9132, PEX_PEXIWARn[TRGT] for all windows defaults to 0xF, which is mapped to CCSRBAR. However, for other products, 0xF is mapped to the local memory. Therefore, for the BSC9132, any default PCI Express access to the local memory (DDR) will now access the CCSRBAR. This patch changes the mapping of targets of inbound windows PEX_PEXIWARn[TRGT] to the Local address space – 0x0 (from 0xF). Signed-off-by: Harninder Rai <harninder.rai@xxxxxxxxxxxxx> Signed-off-by: Minghuan Lian <Minghuan.Lian@xxxxxxxxxxxxx> Reviewed-by: Zang Tiefei-R61911 <tie-fei.zang@xxxxxxxxxxxxx> Reviewed-by: Kushwaha Prabhakar-B32579 <prabhakar@xxxxxxxxxxxxx> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@xxxxxxxxxxxxx> Tested-by: Fleming Andrew-AFLEMING <AFLEMING@xxxxxxxxxxxxx> Signed-off-by: Hou Zhiqiang <B48286@xxxxxxxxxxxxx> --- V3: - Remove gerrit stuff. arch/powerpc/platforms/85xx/bsc913x_qds.c | 8 +++++++- arch/powerpc/sysdev/fsl_pci.c | 13 +++++++++++++ 2 files changed, 20 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/85xx/bsc913x_qds.c b/arch/powerpc/platforms/85xx/bsc913x_qds.c index f0927e5..dcfafd6 100644 --- a/arch/powerpc/platforms/85xx/bsc913x_qds.c +++ b/arch/powerpc/platforms/85xx/bsc913x_qds.c @@ -17,6 +17,7 @@ #include <linux/pci.h> #include <asm/mpic.h> #include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> #include <asm/udbg.h> #include "mpc85xx.h" @@ -46,10 +47,12 @@ static void __init bsc913x_qds_setup_arch(void) mpc85xx_smp_init(); #endif + fsl_pci_assign_primary(); + pr_info("bsc913x board from Freescale Semiconductor\n"); } -machine_device_initcall(bsc9132_qds, mpc85xx_common_publish_devices); +machine_arch_initcall(bsc9132_qds, mpc85xx_common_publish_devices); /* * Called very early, device-tree isn't unflattened @@ -67,6 +70,9 @@ define_machine(bsc9132_qds) { .probe = bsc9132_qds_probe, .setup_arch = bsc913x_qds_setup_arch, .init_IRQ = bsc913x_qds_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif .get_irq = mpic_get_irq, .restart = fsl_rstcr_restart, .calibrate_decr = generic_calibrate_decr, diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index ebc1f412..b8607f6 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -193,6 +193,19 @@ static void setup_pci_atmu(struct pci_controller *hose) const u64 *reg; int len; + if (of_device_is_compatible(hose->dn, "fsl,bsc9132-pcie")) { + /* + * BSC9132 Rev1.0 has an issue where all the PEX inbound + * windows have implemented the default target value as 0xf + * for CCSR space.In all Freescale legacy devices the target + * of 0xf is reserved for local memory space. 9132 Rev1.0 + * now has local mempry space mapped to target 0x0 instead of + * 0xf. Hence adding a workaround to remove the target 0xf + * defined for memory space from Inbound window attributes. + */ + piwar &= ~PIWAR_TGI_LOCAL; + } + if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) { if (in_be32(&pci->block_rev1) >= PCIE_IP_REV_2_2) { win_idx = 2; -- 2.1.0.27.g96db324 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html