On Wed, Nov 04, 2015 at 11:12:11AM -0600, Andrew F. Davis wrote:
> The TPS65086 PMIC contains several regulators and a GPO controller.
> Add bindings for the TPS65086 regulators.
>
> Signed-off-by: Andrew F. Davis <afd@xxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
> ---
> .../bindings/regulator/tps65086-regulator.txt | 35 ++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/regulator/tps65086-regulator.txt
>
> diff --git a/Documentation/devicetree/bindings/regulator/tps65086-regulator.txt b/Documentation/devicetree/bindings/regulator/tps65086-regulator.txt
> new file mode 100644
> index 0000000..de7d2d6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/tps65086-regulator.txt
> @@ -0,0 +1,35 @@
> +* TPS65086 regulator bindings
> +
> +Required properties:
> + - compatible : Should be "ti,tps65086-regulator".
> + - list of regulators provided by this controller, must be named after their
> + hardware counterparts: buck[1-6], ldoa[1-3], swa1, swb[1-2], and vtt.
> +
> +Optional properties:
> + - Per-regulator optional properties are defined in regulator.txt.
> + - ti,regulator-step-size-25mv : This is applicable for buck[1,2,6], set this
> + if the regulator is factory set with a 25mv
> + step voltage mapping.
> + - ti,regulator-decay : This is applicable for buck[1-6], set this if
> + the output needs to decay, default is for the
> + output to slew down.
> +
> +Example:
> +
> + regulators {
> + compatible = "ti,tps65086-regulator";
> +
> + buck1 {
> + regulator-name = "vcc1";
> + regulator-min-microvolt = <1600000>;
> + regulator-max-microvolt = <1600000>;
> + regulator-boot-on;
> + ti,regulator-step-size-25mv;
> + ti,regulator-decay;
> + };
> +
> + swa1 {
> + regulator-name = "ls1";
> + regulator-boot-on;
> + };
> + };
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
