On Wednesday 04 November 2015 14:48:24 Liu Gang wrote:
> Layerscape has the same ip block/controller as
> GPIO on powerpc platform(MPC8XXX).
>
> So use portable i/o accessors, as in_be32/out_be32
> accessors are Power architecture specific whereas
> ioread32/iowrite32 and ioread32be/iowrite32be are
> available in other architectures.
>
> Layerscape GPIO controller's registers may be big
> or little endian, so the code needs to get the
> endian property from DTB, then make additional
> functions to fit right register read/write
> operations.
>
> Currently the code can support ls2080a GPIO with
> little endian registers. And it can also work well
> on other layerscape platform with big endian GPIO
> registers.
>
> Signed-off-by: Liu Gang <Gang.Liu@xxxxxxxxxxxxx>
> Signed-off-by: Shaveta Leekha <shaveta@xxxxxxxxxxxxx>
>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 8949b3f..c3ca283 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -290,12 +290,12 @@ config GPIO_MPC5200
> depends on PPC_MPC52xx
>
> config GPIO_MPC8XXX
> - bool "MPC512x/MPC8xxx GPIO support"
> + bool "MPC512x/MPC8xxx/QorIQ GPIO support"
> depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \
> - FSL_SOC_BOOKE || PPC_86xx
> + FSL_SOC_BOOKE || PPC_86xx || ARCH_LAYERSCAPE
> help
> Say Y here if you're going to use hardware that connects to the
> - MPC512x/831x/834x/837x/8572/8610 GPIOs.
> + MPC512x/831x/834x/837x/8572/8610/QorIQ GPIOs.
It would be nice to also add '|| COMPILE_TEST' here and ensure that
it also builds on x86 with that set, to get better coverage from
the automated build testing infrastructure.
> +static bool gpio_little_endian;
> +static inline u32 gpio_in32(void __iomem *addr)
> +{
> + u32 val;
> +
> + if (gpio_little_endian)
> + val = ioread32(addr);
> + else
> + val = ioread32be(addr);
> +
> + return val;
> +}
> +
> +static inline void gpio_out32(u32 val, void __iomem *addr)
> +{
> + if (gpio_little_endian)
> + iowrite32(val, addr);
> + else
> + iowrite32be(val, addr);
> +}
I guess this is fixed per architecture, so you could also do this as
static inline void gpio_out32(u32 val, void __iomem *addr)
{
if (IS_ENABLED(CONFIG_ARM))
iowrite32(val, addr);
else if (IS_ENABLED(CONFIG_PPC)
iowrite32be(val, addr);
else
BUG();
}
and then check that the DT flag for little-endian matches
the architecture specific default.
Your version is more generic of course, while the one I show here
is a little more efficient and avoids the global variable. Your choice.
Arnd
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
