Re: [PATCH 1/2] dma: add Qualcomm Technologies HIDMA management driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 






On 11/2/2015 4:30 PM, Arnd Bergmann wrote:
On Saturday 31 October 2015 02:51:46 Sinan Kaya wrote:
On 10/30/2015 5:34 AM, Arnd Bergmann wrote:
On Thursday 29 October 2015 23:08:12 Sinan Kaya wrote:
diff --git a/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt b/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt
+
+static int qcom_hidma_mgmt_err_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, qcom_hidma_mgmt_err, inode->i_private);
+}
+
+static const struct file_operations qcom_hidma_mgmt_err_fops = {
+	.open = qcom_hidma_mgmt_err_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static ssize_t qcom_hidma_mgmt_mhiderr_clr(struct file *file,
+	const char __user *user_buf, size_t count, loff_t *ppos)
+{
+	struct qcom_hidma_mgmt_dev *mgmtdev = file->f_inode->i_private;
+
+	HIDMA_RUNTIME_GET(mgmtdev);
+	writel(1, mgmtdev->dev_virtaddr + MHID_BUS_ERR_CLR_OFFSET);
+	HIDMA_RUNTIME_SET(mgmtdev);
+	return count;
+}
+
+static const struct file_operations qcom_hidma_mgmt_mhiderr_clrfops = {
+	.write = qcom_hidma_mgmt_mhiderr_clr,
+};

Is this really just a debugging interface? If anyone would do this
for normal operation, it needs to be a proper API.

This will be used by the system admin to monitor/reset the execution
state of the DMA channels. This will be the management interface.
Debugfs is probably not the right choice. I originally had sysfs but
than had some doubts. I'm open to suggestions.

User interface design is unfortunately always hard, and I don't have
an obvious answer for you.

Using debugfs by definition means that you don't expect users to
rely on ABI stability, so they should not write any automated scripts
against the contents of the files.

With sysfs, the opposite is true: you need to maintain compatibility
for as long as anyone might rely on the current interface, and it
needs to be reviewed properly and documented in Documentation/ABI/.

Other options are to use ioctl(), netlink or your own virtual file
system, but each of them has the same ABI requirements as sysfs.

Regardless of what you pick, you also need to consider how other drivers
would use the same interface: If someone else has hardware that does
the same thing, we want to be able to use the same tools to access
it, so you should avoid having any hardware specific data in it and
keep it as generic and extensible as possible. In this particular
case, that probably means you should implement the user interfaces in
the dmaengine core driver, and let the specific DMA driver provide
callback function pointers along with the normal ones to fill that
data.

Thanks, I'll think about this. I'm inclined towards sysfs.

+	dev_info(&pdev->dev,
+		"HI-DMA engine management driver registration complete\n");
+	platform_set_drvdata(pdev, mgmtdev);
+	HIDMA_RUNTIME_SET(mgmtdev);
+	return 0;
+out:
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_sync_suspend(&pdev->dev);
+	return rc;
+}

The rest of the probe function does not register any user interface aside from
the debugging stuff. Can you explain in the changelog how you expect the
driver to be used in a real system? Is there another driver coming?

I expect this driver to grow in functionality over time. Right now, it
does the global init for the DMA. After that all channels execute on
their own without depending on each other. Global init has to be done
first before attempting to do any channel initialization.

There is also implied startup ordering requirements. I was doing this by
using channel driver with the late binding to guarantee that.

As soon as I use module_platform_driver, the ordering gets reversed for
some reason.

For the ordering requirements, it's probably best to export a symbol
with the entry point and let the normal driver call into that. Using
separate initcall levels is not something you should do in a normal
device driver like this.

I figured this out. If the channel driver starts before the management driver; then channel reset fails. I'm handling this in the channel driver and am returning -EPROBE_DEFER. After that, management driver gets its chance to work. Then, the channel driver again. This change is in the v2 series.

What is the relation between the device nodes for the two kinds of
devices? Does it make sense to model the other one as a child device
of this one? That way you would trivially do the ordering by not marking
this one as 'compatible="simple-bus"' and triggering the registration
of the child from the parent probe function.


The required order is management driver first, channel drivers next. If the order is reversed, channel init fails. I handle this with deferred probing.

I tried to keep loose binding between the management driver due to QEMU.

QEMU auto-generates the devicetree entries. The guest machine just sees one devicetree object for the DMA channel but guest machine device-tree kernel does not have any management driver entity.

This requires DMA channel driver to work independently in the guest machine without dependencies.

	Arnd


--
Sinan Kaya
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux