On 11/01/2015 12:35 PM, Jonathan Cameron wrote:
On 31/10/15 16:31, Andrew F. Davis wrote:
Hello all,
This series adds the TI AFE4404 "Ultra-small, Integrated AFE for
Wearable, Optical Heart Rate Monitoring and Bio-Sensing".
This work is based on previous work by Dan Murphy [0] who is working
on other tasks at the moment, so I will be helping to continue
upstreaming this driver. This is more of a re-write than a continuation
and there are many changes so I am submitting this as a v1.
This device is very similar to the AFE4403 and I was originally planning
on pushing the two drivers together with common core functions in a
third file. The AFE4403 driver is still being tested so I merged common
code back into this driver, this is why this driver may seem a bit
unnecessarily modular. I will probably split this stuff back out when
I push the AFE4403.
I also had some issues with sysfs naming for the channels; this device
has three input channels from three LED stages and two ambient
channels based on the LED stages. This might have been be a good place
for using IIO modifiers[1], but we also have two differential channels
based on the ambient channels, and channels cannot have both modifiers
and be differential (the modifier is stored in the differential channel's
ID field?).
True enough. Didn't expect to run into this particular problem, but I guess
someone will always make hardware breaking any assumptions we make from the
software side of things.
Seems that way, it probably would work to have modified be more that a single
bit flag, maybe call it modifier and just store the modifier in there. Doesn't
look like it would be that hard right now to fix.
I'm not really sure I understand the need for modifiers at all really, seems
most are used by a single driver to get around just naming the channel.
So I used sysfs names that would be close to what they
would be if IIO supported these things.
Fair enough as a starting point though we probably want to figure out how
to do this 'right'. Adding an extra field to the channel descriptor will
be easy enough - it'll be event codes that are nasty to handle.
Jonathan
[0] http://www.spinics.net/lists/linux-iio/msg18413.html
[1] IIO_MOD_TEMP_AMBIENT could be renamed IIO_MOD_AMBIENT as it can
also apply to LIGHT, PRESSURE, HUMIDITY, etc..
No problem with this change so please send a patch.
Thanks,
Andrew
Andrew F. Davis (2):
Documentation: afe4404: Add DT bindings for the AFE4404 heart monitor
iio: health: Add driver for the TI AFE4404 heart monitor
.../ABI/testing/sysfs-bus-iio-health-afe4404 | 70 +++
.../devicetree/bindings/iio/health/afe4404.txt | 27 ++
drivers/iio/Kconfig | 1 +
drivers/iio/Makefile | 1 +
drivers/iio/health/Kconfig | 24 +
drivers/iio/health/Makefile | 6 +
drivers/iio/health/afe4404.c | 526 +++++++++++++++++++++
drivers/iio/health/afe440x.h | 159 +++++++
8 files changed, 814 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-health-afe4404
create mode 100644 Documentation/devicetree/bindings/iio/health/afe4404.txt
create mode 100644 drivers/iio/health/Kconfig
create mode 100644 drivers/iio/health/Makefile
create mode 100644 drivers/iio/health/afe4404.c
create mode 100644 drivers/iio/health/afe440x.h
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
