[PATCH v6 1/5] Documentation: tps65912: Add DT bindings for the TPS65912 PMIC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




The TPS65912 PMIC contains several regulators and a GPIO controller.
Add bindings for the TPS65912 PMIC.

Signed-off-by: Andrew F. Davis <afd@xxxxxx>
---
 .../devicetree/bindings/gpio/gpio-tps65912.txt     | 16 +++++++
 Documentation/devicetree/bindings/mfd/tps65912.txt | 51 ++++++++++++++++++++++
 .../bindings/regulator/tps65912-regulator.txt      | 28 ++++++++++++
 3 files changed, 95 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/gpio-tps65912.txt
 create mode 100644 Documentation/devicetree/bindings/mfd/tps65912.txt
 create mode 100644 Documentation/devicetree/bindings/regulator/tps65912-regulator.txt

diff --git a/Documentation/devicetree/bindings/gpio/gpio-tps65912.txt b/Documentation/devicetree/bindings/gpio/gpio-tps65912.txt
new file mode 100644
index 0000000..ba8d633
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-tps65912.txt
@@ -0,0 +1,16 @@
+* TPS65912 GPIO Controller bindings
+
+Required properties:
+ - compatible		: Should be "ti,tps65912-gpio".
+ - gpio-controller	: Marks the device node as a GPIO Controller.
+ - #gpio-cells		: Should be two.  The first cell is the pin number and
+			    the second cell is used to specify flags.
+			    See ../gpio/gpio.txt for more information.
+
+Example:
+
+	gpio4: gpio {
+		compatible = "ti,tps65912-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
diff --git a/Documentation/devicetree/bindings/mfd/tps65912.txt b/Documentation/devicetree/bindings/mfd/tps65912.txt
new file mode 100644
index 0000000..65426b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/tps65912.txt
@@ -0,0 +1,51 @@
+* TPS65912 Power Management Integrated Circuit bindings
+
+Required properties:
+ - compatible		: Should be "ti,tps65912".
+ - reg			: Slave address or chip select number (I2C / SPI).
+ - interrupt-parent	: The parent interrupt controller.
+ - interrupts		: The interrupt line the device is connected to.
+ - interrupt-controller	: Marks the device node as an interrupt controller.
+ - #interrupt-cells	: The number of cells to describe an IRQ, this should be 2.
+			    The first cell is the IRQ number.
+			    The second cell is the flags, encoded as the trigger masks from
+			    ../interrupt-controller/interrupts.txt.
+
+Additional nodes defined in:
+ - Regulators: ../regulator/tps65912-regulator.txt
+ - GPIO: ../gpio/gpio-tps65912.txt.
+
+Example:
+
+	pmic: tps65912@2d {
+		compatible = "ti,tps65912";
+		reg = <0x2d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		regulators {
+			compatible = "ti,tps65912-regulator";
+
+			dcdc1 {
+				regulator-name = "vdd_core";
+				regulator-min-microvolt = <912000>;
+				regulator-max-microvolt = <1144000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1900000>;
+				regulator-max-microvolt = <1900000>;
+			};
+		};
+
+		gpio4: gpio {
+			compatible = "ti,tps65912-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/tps65912-regulator.txt b/Documentation/devicetree/bindings/regulator/tps65912-regulator.txt
new file mode 100644
index 0000000..b81973d
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps65912-regulator.txt
@@ -0,0 +1,28 @@
+* TPS65912 regulator bindings
+
+Required properties:
+ - compatible		: Should be "ti,tps65912-regulator".
+ - list of regulators provided by this controller, must be named
+     after their hardware counterparts: dcdc[1-4] and ldo[1-10].
+
+Each regulator is defined using the standard binding for regulators.
+
+Example:
+
+	regulator {
+		compatible = "ti,tps65912-regulator";
+
+		dcdc1 {
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1144000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1 {
+			regulator-name = "ldo1";
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <1900000>;
+		};
+	};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux