The display pipeline of the Allwinner A10 is involving several loosely
coupled components.
Add a documentation for the bindings.
Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
---
.../devicetree/bindings/drm/sunxi/sun4i-drm.txt | 122 +++++++++++++++++++++
1 file changed, 122 insertions(+)
create mode 100644 Documentation/devicetree/bindings/drm/sunxi/sun4i-drm.txt
diff --git a/Documentation/devicetree/bindings/drm/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/drm/sunxi/sun4i-drm.txt
new file mode 100644
index 000000000000..dbdccef787b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/sunxi/sun4i-drm.txt
@@ -0,0 +1,122 @@
+Allwinner A10 Display Pipeline
+==============================
+
+The Allwinner A10 Display pipeline is composed of several components
+that are going to be documented below:
+
+TV Encoder
+----------
+
+The TV Encoder supports the composite and VGA output. It is one end of
+the pipeline.
+
+Required properties:
+ - compatible: value should be "allwinner,sun4i-a10-tv-encoder".
+ - reg: base address and size of memory-mapped region
+ - clocks: the clocks driving the TV encoder
+
+TCON
+----
+
+The TCON acts as a CRTC and encoder for RGB / LVDS interfaces.
+
+Required properties:
+ - compatible: value should be "allwinner,sun4i-a10-tcon".
+ - reg: base address and size of memory-mapped region
+ - interrupts: interrupt associated to this IP
+ - clocks: phandles to the clocks feeding the TCON. Three are needed:
+ - 'ahb': the interface clocks
+ - 'tcon-ch0': The clock driving the TCON channel 0
+ - 'tcon-ch1': The clock driving the TCON channel 0
+
+ - clock-names: the clock names mentionned above
+ - clock-output-names: Name of the pixel clock created
+
+
+Display Engine Backend
+----------------------
+
+The display engine backend exposes layers and sprites to the
+system. It's split into two components, the frontend and backend, the
+frontend doing formats conversion, scaling, deinterlacing, while the
+backend actually manages the layers.
+
+Required properties:
+ - compatible: value must be one of:
+ * allwinner,sun5i-a13-display-engine
+
+ - reg: base address and size of the memory-mapped region. Two are needed:
+ * backend0: registers of the display engine backend
+ * frontend0: registers of the display engine frontend
+ - reg_names: the region names mentionned above.
+
+ - interrupts: frontend interrupt phandle
+
+ - clocks: phandles to the clocks feeding the frontend and backend
+ * backend0-bus: the backend interface clock
+ * backend0-mod: the backend module clock
+ * backend0-ram: the backend DRAM clock
+ * frontend0-bus: the frontend interface clock
+ * frontend0-mod: the frontend module clock
+ * frontend0-ram: the frontend DRAM clock
+ - clock-names: the clock names mentionned above
+
+ - resets: phandles to the reset controllers. Two are needed:
+ * backend0: backend reset controller
+ * frontend0: frontend reset controller
+ - reset-names: the reset names mentionned above
+
+ - allwinner,tcon: phandle to the TCON in our pipeline
+
+Optional properties:
+ - allwinner,tv-encoder: phandle to the TV Encoder in our pipeline
+ - allwinner,panel: phandle to the panel used in our RGB interface
+
+Example:
+
+panel: panel {
+ compatible = "olimex,lcd-olinuxino-43-ts";
+};
+
+tve: encoder@01c0a000 {
+ compatible = "allwinner,sun4i-a10-tv-encoder";
+ reg = <0x01c0a000 0x1000>;
+ clocks = <&ahb_gates 34>;
+};
+
+tcon: lcd-controller@01c0c000 {
+ compatible = "allwinner,sun4i-a10-tcon";
+ reg = <0x01c0c000 0x1000>;
+ interrupts = <44>;
+ clocks = <&ahb_gates 36>,
+ <&tcon_ch0_clk>,
+ <&tcon_ch1_clk>;
+ clock-names = "ahb",
+ "tcon-ch0",
+ "tcon-ch1";
+ clock-output-names = "tcon-pixel-clock";
+};
+
+de: display-engine@01e00000 {
+ compatible = "allwinner,sun5i-a13-display-engine";
+ reg = <0x01e00000 0x20000>,
+ <0x01e60000 0x10000>;
+ reg-names = "frontend0",
+ "backend0";
+ interrupts = <47>;
+ interrupt-names = "engine0";
+ clocks = <&ahb_gates 46>, <&de_fe_clk>,
+ <&dram_gates 25>, <&ahb_gates 44>,
+ <&de_be_clk>, <&dram_gates 26>;
+ clock-names = "frontend0-bus", "frontend0-mod",
+ "frontend0-ram", "backend0-bus",
+ "backend0-mod", "backend0-ram";
+ resets = <&de_fe_clk>,
+ <&de_be_clk>;
+ reset-names = "frontend0",
+ "backend0";
+
+ allwinner,tcon = <&tcon>;
+ allwinner,tv-encoder = <&tve>;
+ allwinner,panel = <&panel>;
+};
--
2.6.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
