Add AHCI and PHY device nodes to MIPS-based BCM7425 set-top box
platform.
Signed-off-by: Jaedon Shin <jaedon.shin@xxxxxxxxx>
---
arch/mips/boot/dts/brcm/bcm7425.dtsi | 40 ++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/arch/mips/boot/dts/brcm/bcm7425.dtsi b/arch/mips/boot/dts/brcm/bcm7425.dtsi
index 5b660b617ead..47d7bbb20dfd 100644
--- a/arch/mips/boot/dts/brcm/bcm7425.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7425.dtsi
@@ -221,5 +221,45 @@
interrupts = <73>;
status = "disabled";
};
+
+ sata: sata@181000 {
+ compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
+ reg-names = "ahci", "top-ctrl";
+ reg = <0x181000 0xa9c>, <0x180020 0x1c>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata_phy0>;
+ };
+
+ sata1: sata-port@1 {
+ reg = <1>;
+ phys = <&sata_phy1>;
+ };
+ };
+
+ sata_phy: sata-phy@1800000 {
+ compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
+ reg = <0x180100 0x0eff>;
+ reg-names = "phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata_phy0: sata-phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+
+ sata_phy1: sata-phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ };
+ };
};
};
--
2.6.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
