> On Oct 30, 2015, at 10:38 PM, Jaedon Shin <jaedon.shin@xxxxxxxxx> wrote:
>
> Add AHCI and PHY device nodes to MIPS-based BCM7425 set-top box
> platform.
>
> Signed-off-by: Jaedon Shin <jaedon.shin@xxxxxxxxx>
> ---
> arch/mips/boot/dts/brcm/bcm7425.dtsi | 42 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 42 insertions(+)
>
> diff --git a/arch/mips/boot/dts/brcm/bcm7425.dtsi b/arch/mips/boot/dts/brcm/bcm7425.dtsi
> index 5b660b617ead..e24d41ab4e30 100644
> --- a/arch/mips/boot/dts/brcm/bcm7425.dtsi
> +++ b/arch/mips/boot/dts/brcm/bcm7425.dtsi
> @@ -221,5 +221,47 @@
> interrupts = <73>;
> status = "disabled";
> };
> +
> + sata: sata@181000 {
> + compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
> + reg-names = "ahci", "top-ctrl";
> + reg = <0x181000 0xa9c>, <0x180020 0x1c>;
> + interrupt-parent = <&periph_intc>;
> + interrupts = <40>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + brcm,broken-ncq;
> + brcm,broken-phi;
I am sorry. This should be remove brcm,broken-ncq and brcm,broken-phy.
> + status = "disabled";
> +
> + sata0: sata-port@0 {
> + reg = <0>;
> + phys = <&sata_phy0>;
> + };
> +
> + sata1: sata-port@1 {
> + reg = <1>;
> + phys = <&sata_phy1>;
> + };
> + };
> +
> + sata_phy: sata-phy@1800000 {
> + compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
> + reg = <0x180100 0x0eff>;
> + reg-names = "phy";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> +
> + sata_phy0: sata-phy@0 {
> + reg = <0>;
> + #phy-cells = <0>;
> + };
> +
> + sata_phy1: sata-phy@1 {
> + reg = <1>;
> + #phy-cells = <0>;
> + };
> + };
> };
> };
> --
> 2.6.2
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
