On Wed, 28 Oct 2015, Steffen Trumtrar wrote:
> Hi!
>
> On Tue, Oct 27, 2015 at 05:09:11PM -0500, atull@xxxxxxxxxxxxxxxxxxxxx wrote:
> > From: Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx>
> >
> > New bindings document for simple fpga bus.
> >
> > Signed-off-by: Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx>
> > ---
> > v9: initial version added to this patchset
> > v10: s/fpga/FPGA/g
> > replace DT overlay example with slightly more complicated example
> > move to staging/simple-fpga-bus
> > v11: No change in this patch for v11 of the patch set
> > v12: Moved out of staging.
> > Changed to use FPGA bridges framework instead of resets
> > for bridges.
> > ---
> > .../devicetree/bindings/fpga/simple-fpga-bus.txt | 81 ++++++++++++++++++++
> > 1 file changed, 81 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/fpga/simple-fpga-bus.txt
> >
> > diff --git a/Documentation/devicetree/bindings/fpga/simple-fpga-bus.txt b/Documentation/devicetree/bindings/fpga/simple-fpga-bus.txt
> > new file mode 100644
> > index 0000000..2e742f7
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/fpga/simple-fpga-bus.txt
> > @@ -0,0 +1,81 @@
> > +Simple FPGA Bus
> > +===============
> > +
> > +A Simple FPGA Bus is a bus that handles configuring an FPGA and its bridges
> > +before populating the devices below its node. All this happens when a device
> > +tree overlay is added to the live tree. This document describes that device
> > +tree overlay.
> > +
>
> This is not really true, is it?
> The driver should work without applying the overlay, e.g. the bootloader
> might have already done it.
>
Yes it's true. I'm not clear what you are saying. If the bootloader has
programmed the FPGA, the overlay can leave out the optional properties
and the FPGA won't get reprogrammed; the child devices will still get
added and probed. So this handles both the case where you want to reprogram
the FPGA under Linux and where the FPGA was programmed by a bootloader.
I'll fix the minor nits you are pointing out below. Thanks for the feedback.
Alan
> > +Required properties:
> > +- compatible : should contain "simple-fpga-bus"
> > +- #address-cells, #size-cells, ranges: must be present to handle address space
> > + mapping for children.
> > +
> > +Optional properties:
> > +- fpga-mgr : should contain a phandle to a FPGA manager.
> > +- fpga-firmware : should contain the name of a FPGA image file located on the
> > + firmware search path.
> > +- partial-reconfig : boolean property should be defined if partial
> > + reconfiguration of the FPGA is to be done, otherwise full reconfiguration
> > + is done.
> > +- fpga-bridges : should contain a list of bridges that the bus will disable
> > + before programming the FPGA and then enable after the FPGA has been
> ^^^ ???
>
> > +
> > +Example:
> > +
> > +/dts-v1/;
> > +/plugin/;
> > +/ {
> > + fragment@0 {
> > + target-path="/soc";
> > + __overlay__ {
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > +
> > + bridge@0xff200000 {
> ^^
>
> > + compatible = "simple-fpga-bus";
> > + reg = <0xc0000000 0x20000000>,
> > + <0xff200000 0x00200000>;
> > + reg-names = "axi_h2f", "axi_h2f_lw";
> > +
> > + #address-cells = <0x2>;
> > + #size-cells = <0x1>;
> > +
> > + ranges = <0x00000000 0x00000000 0xc0000000 0x00010000>,
> > + <0x00000001 0x00020000 0xff220000 0x00000008>,
> > + <0x00000001 0x00010040 0xff210040 0x00000020>;
> > +
> > + clocks = <0x2 0x2>;
> > + clock-names = "h2f_lw_axi_clock", "f2h_sdram0_clock";
> > +
> > + fpga-mgr = <&hps_0_fpgamgr>;
> > + fpga-firmware = "soc_system.rbf";
> > +
> > + fpga-bridges = <&hps_fpgabridge0>, <&hps_fpgabridge1>, <&hps_fpgabridge2>;
> > +
> > + onchip_memory2_0: memory@0x000000000 {
> ^^
>
> > + device_type = "memory";
> > + compatible = "ALTR,onchipmem-15.1";
> > + reg = <0x00000000 0x00000000 0x00010000>;
> > + };
> > +
> > + jtag_uart: serial@0x100020000 {
> ^^
>
> > + compatible = "altr,juart-15.1", "altr,juart-1.0";
> > + reg = <0x00000001 0x00020000 0x00000008>;
> > + interrupt-parent = <&intc>;
> > + interrupts = <0 42 4>;
> > + };
> > +
> > + led_pio: gpio@0x100010040 {
> ^^
>
> No 0x, please.
>
> > + compatible = "altr,pio-15.1", "altr,pio-1.0";
> > + reg = <0x00000001 0x00010040 0x00000020>;
> > + altr,gpio-bank-width = <4>;
> > + resetvalue = <0>;
> > + #gpio-cells = <2>;
> > + gpio-controller;
> > + };
> > + };
> > + };
> > + };
> > +};
> > +
>
> Regards,
> Steffen
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
