On Tue, 27 Oct 2015, Charles Keepax wrote: > Binding documentation has been added in new subsystem specific binding > documents. This patch removes the now duplicate documentation from the > MFD documentation. > > Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx> > --- > > Changes since v2: > - No longer moving the core regulators into the regulator binding document, > as they are properties of the device as a whole not just the regulators > - Moved the maintainer updates into a seperate patch > > Lee, I have removed your ack because the patch has changed a fair amount. > Apologies if this would not have been your preference. That was the right thing to do. > Thanks, > Charles > > Documentation/devicetree/bindings/mfd/arizona.txt | 15 +++------------ > 1 files changed, 3 insertions(+), 12 deletions(-) Applied, thanks. > diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt > index a8fee60..18be0cb 100644 > --- a/Documentation/devicetree/bindings/mfd/arizona.txt > +++ b/Documentation/devicetree/bindings/mfd/arizona.txt > @@ -44,7 +44,6 @@ Required properties: > Optional properties: > > - wlf,reset : GPIO specifier for the GPIO controlling /RESET > - - wlf,ldoena : GPIO specifier for the GPIO controlling LDOENA > > - wlf,gpio-defaults : A list of GPIO configuration register values. Defines > for the appropriate values can found in <dt-bindings/mfd/arizona.txt>. If > @@ -67,21 +66,13 @@ Optional properties: > present, the number of values should be less than or equal to the > number of inputs, unspecified inputs will use the chip default. > > - - wlf,hpdet-channel : Headphone detection channel. > - ARIZONA_ACCDET_MODE_HPL or 1 - Headphone detect mode is set to HPDETL > - ARIZONA_ACCDET_MODE_HPR or 2 - Headphone detect mode is set to HPDETR > - If this node is not mentioned or if the value is unknown, then > - headphone detection mode is set to HPDETL. > - > - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if > they are being externally supplied. As covered in > Documentation/devicetree/bindings/regulator/regulator.txt > > -Optional subnodes: > - - ldo1 : Initial data for the LDO1 regulator, as covered in > - Documentation/devicetree/bindings/regulator/regulator.txt > - - micvdd : Initial data for the MICVDD regulator, as covered in > - Documentation/devicetree/bindings/regulator/regulator.txt > +Also see child specific device properties: > + Regulator - ../regulator/arizona-regulator.txt > + Extcon - ../extcon/extcon-arizona.txt > > Example: > -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
