On 10/28/2015 05:23 AM, Heiko Stuebner wrote:
Am Samstag, 24. Oktober 2015, 11:06:04 schrieb Yakir Yang:
Add phy driver for the Rockchip DisplayPort PHY module. This
is required to get DisplayPort working in Rockchip SoCs.
Tested-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx>
---
diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/phy-rockchip-dp.c
new file mode 100644
index 0000000..4af19af
--- /dev/null
+++ b/drivers/phy/phy-rockchip-dp.c
@@ -0,0 +1,153 @@
+/*
+ * Rockchip DP PHY driver
+ *
+ * Copyright (C) 2015 FuZhou Rockchip Co., Ltd.
+ * Author: Yakir Yang <ykk@@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+
+#define GRF_SOC_CON12 0x0274
+#define GRF_EDP_REF_CLK_SEL_INTER BIT(4)
+#define GRF_EDP_PHY_SIDDQ_WRITE_EN BIT(21)
+#define GRF_EDP_PHY_SIDDQ_ON 0
+#define GRF_EDP_PHY_SIDDQ_OFF BIT(5)
mixed spacers (tabs and spaces), please use either tabs if you want to
align stuff or a single space.
Also you're mixing the handling here, for SIDDQ you're defining both the
actual bit as well as the write-enable bit, but for CLK_SEL_INTR you're
hard-coding the 16-bit shift down in the code.
You could also just use/copy the HIWORD_MASK macro we use for example
in the clock controller.
Great, thanks.
- Yakir
+
+struct rockchip_dp_phy {
+ struct device *dev;
+ struct regmap *grf;
+ struct clk *phy_24m;
+};
+
+static int rockchip_set_phy_state(struct phy *phy, bool enable)
+{
+ struct rockchip_dp_phy *dp = phy_get_drvdata(phy);
+ int ret;
+
+ if (enable) {
+ ret = regmap_write(dp->grf, GRF_SOC_CON12,
+ GRF_EDP_PHY_SIDDQ_WRITE_EN |
+ GRF_EDP_PHY_SIDDQ_ON);
+ if (ret < 0) {
+ dev_err(dp->dev, "Can't enable PHY power %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(dp->phy_24m);
+
unnecessary empty line after clk_prepare_enable
with these things fixed,
Reviewed-by: Heiko Stuebner <heiko@xxxxxxxxx>
Cheers,
Heiko
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
