> -----Original Message----- > From: J. German Rivera [mailto:German.Rivera@xxxxxxxxxxxxx] > Sent: Friday, October 23, 2015 8:31 PM > To: robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-arm- > kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx > Cc: Sharma Bhupesh-B45370; Yoder Stuart-B08248; Li Yang-Leo-R58472; Rivera Jose-B46482 > Subject: [PATCH] arm64: dts: Added syscon-reboot node for FSL's LS2085A SoC > > Added sys-reboot node to the FSL's LS2085A SoC DT to leverage > the ARM-generic reboot mechanism for this SoC. This mechanism > is enabled through CONFIG_POWER_RESET_SYSCON. > > Signed-off-by: J. German Rivera <German.Rivera@xxxxxxxxxxxxx> > --- > arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi > index e281ceb..6f82163 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi > +++ b/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi > @@ -131,6 +131,18 @@ > interrupts = <1 9 0x4>; > }; > > + rst_ccsr: rstccsr@1E60000 { > + compatible = "syscon"; > + reg = <0x0 0x1E60000 0x0 0x10000>; > + }; > + > + reboot@65024000 { > + compatible ="syscon-reboot"; > + regmap = <&rst_ccsr>; > + offset = <0x0>; > + mask = <0x2>; > + }; > + Drop the unit address "65024000", since you have no "reg" property. The ePAPR explicitly says: "If the node has no reg property, the @ and unit-address must be omitted and the node-name alone differentiates the node from other nodes at the same level in the tree. Also, other examples in the kernel just use plain "reboot" as the name: arch/arm/boot/dts/hisi-x5hd2.dtsi arch/arm/boot/dts/vfxxx.dtsi arch/mips/boot/dts/brcm/bcm6328.dtsi Also, Bhupesh's LS2080A DTS updates were just accepte4d, and the device tree name is no longer fsl-ls2085a.dtsi. You need to rebase on top of those changes. Thanks, Stuart -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
