Re: [v2 03/10] ata: ahci_brcmstb: add quick for broken phy

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, Oct 27, 2015 at 1:48 AM, Jaedon Shin <jaedon.shin@xxxxxxxxx> wrote:
> Add quick for broken phy. The ARM-based 28nm chipsets have four phy

I believe you mean "quirk".

> interface control registers and each port has two registers. But, The

registers, but the...

> MIPS-based 40nm chipsets have three. and there are no information and

s/and there/There/

> documentation. The legacy version of broadcom's strict-ahci based
> initial code did not control these registers.
>
> Signed-off-by: Jaedon Shin <jaedon.shin@xxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt |  1 +

Other than the commit message:

Acked-by: Rob Herring <robh@xxxxxxxxxx>

>  drivers/ata/ahci_brcmstb.c                                  | 10 ++++++++++
>  2 files changed, 11 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt b/Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt
> index 488a383ce202..0f0925d58188 100644
> --- a/Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt
> +++ b/Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt
> @@ -12,6 +12,7 @@ Required properties:
>
>  Optional properties:
>  - brcm,broken-ncq    : if present, NCQ is unusable
> +- brcm,broken-phy    : if present, to control phy interface is unusable
>
>  Also see ahci-platform.txt.
>
> diff --git a/drivers/ata/ahci_brcmstb.c b/drivers/ata/ahci_brcmstb.c
> index e53962cb48ee..c61303f7c7dc 100644
> --- a/drivers/ata/ahci_brcmstb.c
> +++ b/drivers/ata/ahci_brcmstb.c
> @@ -71,6 +71,7 @@
>
>  enum brcm_ahci_quicks {
>         BRCM_AHCI_QUICK_NONCQ           = BIT(0),
> +       BRCM_AHCI_QUICK_NOPHY           = BIT(1),
>  };
>
>  struct brcm_ahci_priv {
> @@ -119,6 +120,9 @@ static void brcm_sata_phy_enable(struct brcm_ahci_priv *priv, int port)
>         void __iomem *p;
>         u32 reg;
>
> +       if (priv->quicks & BRCM_AHCI_QUICK_NOPHY)
> +               return;
> +
>         /* clear PHY_DEFAULT_POWER_STATE */
>         p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
>         reg = brcm_sata_readreg(p);
> @@ -148,6 +152,9 @@ static void brcm_sata_phy_disable(struct brcm_ahci_priv *priv, int port)
>         void __iomem *p;
>         u32 reg;
>
> +       if (priv->quicks & BRCM_AHCI_QUICK_NOPHY)
> +               return;
> +
>         /* power-off the PHY digital logic */
>         p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
>         reg = brcm_sata_readreg(p);
> @@ -297,6 +304,9 @@ static int brcm_ahci_probe(struct platform_device *pdev)
>         if (of_property_read_bool(dev->of_node, "brcm,broken-ncq"))
>                 priv->quicks |= BRCM_AHCI_QUICK_NONCQ;
>
> +       if (of_property_read_bool(dev->of_node, "brcm,broken-phy"))
> +               priv->quicks |= BRCM_AHCI_QUICK_NOPHY;
> +
>         brcm_sata_init(priv);
>         brcm_sata_quick(pdev, priv);
>
> --
> 2.6.2
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux