Remove unused definitions. The MIPS-based 40nm chipsets has different offset. The SATA_TOP_CTRL_SATA_TP_OUT offset is 0x18 and the SATA_TOP_CTRL_CLIENT_INIT_CTRL is not exist. So, To remove do to avoid confusion. Signed-off-by: Jaedon Shin <jaedon.shin@xxxxxxxxx> --- drivers/ata/ahci_brcmstb.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/ata/ahci_brcmstb.c b/drivers/ata/ahci_brcmstb.c index c61303f7c7dc..2d25a28f4f64 100644 --- a/drivers/ata/ahci_brcmstb.c +++ b/drivers/ata/ahci_brcmstb.c @@ -52,8 +52,6 @@ #define SATA_TOP_CTRL_2_PHY_GLOBAL_RESET BIT(14) #define SATA_TOP_CTRL_PHY_OFFS 0x8 #define SATA_TOP_MAX_PHYS 2 -#define SATA_TOP_CTRL_SATA_TP_OUT 0x1c -#define SATA_TOP_CTRL_CLIENT_INIT_CTRL 0x20 /* On big-endian MIPS, buses are reversed to big endian, so switch them back */ #if defined(CONFIG_MIPS) && defined(__BIG_ENDIAN) -- 2.6.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
