Re: [PATCH v3 3/3] leds: rt5033: Add RT5033 Flash led device driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Jacek,

Thanks for the review
I can make this code better :)

On 2015년 10월 26일 19:10, Jacek Anaszewski wrote:
> Hi Ingi,
> 
> Thanks for the update. I've found a few minor issues, please
> refer to my comments below.
> 
> On 10/23/2015 07:48 AM, Ingi Kim wrote:
>> This patch adds device driver of Richtek RT5033 PMIC.
>> The driver supports a current regulated output to drive
>> white LEDs for camera flash.
>>
>> Signed-off-by: Ingi Kim <ingi2.kim@xxxxxxxxxxx>
>> ---
>>   drivers/leds/Kconfig               |   8 +
>>   drivers/leds/Makefile              |   1 +
>>   drivers/leds/leds-rt5033.c         | 314 +++++++++++++++++++++++++++++++++++++
>>   include/linux/mfd/rt5033-private.h |  49 ++++++
>>   include/linux/mfd/rt5033.h         |  13 ++
>>   5 files changed, 385 insertions(+)
>>   create mode 100644 drivers/leds/leds-rt5033.c
>>
>> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
>> index 42990f2..29613e3 100644
>> --- a/drivers/leds/Kconfig
>> +++ b/drivers/leds/Kconfig
>> @@ -345,6 +345,14 @@ config LEDS_PCA963X
>>         LED driver chip accessed via the I2C bus. Supported
>>         devices include PCA9633 and PCA9634
>>
>> +config LEDS_RT5033
>> +    tristate "LED support for RT5033 PMIC"
>> +    depends on LEDS_CLASS_FLASH && OF
>> +    depends on MFD_RT5033
>> +    help
>> +      This option enables support for on-chip LED driver on
>> +      RT5033 PMIC.
>> +
>>   config LEDS_WM831X_STATUS
>>       tristate "LED support for status LEDs on WM831x PMICs"
>>       depends on LEDS_CLASS
>> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
>> index b503f92..bcc4d93 100644
>> --- a/drivers/leds/Makefile
>> +++ b/drivers/leds/Makefile
>> @@ -23,6 +23,7 @@ obj-$(CONFIG_LEDS_COBALT_QUBE)        += leds-cobalt-qube.o
>>   obj-$(CONFIG_LEDS_COBALT_RAQ)        += leds-cobalt-raq.o
>>   obj-$(CONFIG_LEDS_SUNFIRE)        += leds-sunfire.o
>>   obj-$(CONFIG_LEDS_PCA9532)        += leds-pca9532.o
>> +obj-$(CONFIG_LEDS_RT5033)        += leds-rt5033.o
>>   obj-$(CONFIG_LEDS_GPIO_REGISTER)    += leds-gpio-register.o
>>   obj-$(CONFIG_LEDS_GPIO)            += leds-gpio.o
>>   obj-$(CONFIG_LEDS_LP3944)        += leds-lp3944.o
>> diff --git a/drivers/leds/leds-rt5033.c b/drivers/leds/leds-rt5033.c
>> new file mode 100644
>> index 0000000..4ba1ec6
>> --- /dev/null
>> +++ b/drivers/leds/leds-rt5033.c
>> @@ -0,0 +1,314 @@
>> +/*
>> + * led driver for RT5033
>> + *
>> + * Copyright (C) 2015 Samsung Electronics, Co., Ltd.
>> + * Ingi Kim <ingi2.kim@xxxxxxxxxxx>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + */
>> +
>> +#include <linux/mfd/rt5033.h>
>> +#include <linux/mfd/rt5033-private.h>
>> +#include <linux/module.h>
>> +#include <linux/mutex.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/workqueue.h>
>> +
>> +#define RT5033_LED_FLASH_TIMEOUT_MIN        64000
>> +#define RT5033_LED_FLASH_TIMEOUT_STEP        32000
>> +#define RT5033_LED_FLASH_BRIGHTNESS_MIN        50000
>> +#define RT5033_LED_FLASH_BRIGHTNESS_STEP    25000
>> +#define RT5033_LED_TORCH_BRIGHTNESS_MIN        12500
>> +#define RT5033_LED_TORCH_BRIGHTNESS_STEP    12500
>> +
>> +/* Macro to get offset of rt5033_led_config_data */
>> +#define RT5033_LED_CONFIG_DATA_OFFSET(val, step, min)    (((val) - (min)) \
>> +                            / (step))
>> +
>> +struct rt5033_led_config_data {
>> +    u32 flash_max_microamp;
>> +    u32 flash_max_timeout;
>> +    u32 torch_max_microamp;
>> +};
>> +
>> +static struct rt5033_led *flcdev_to_led(
>> +                struct led_classdev_flash *fled_cdev)
>> +{
>> +    return container_of(fled_cdev, struct rt5033_led, fled_cdev);
>> +}
>> +
>> +static void rt5033_brightness_set(struct rt5033_led *led,
>> +                  enum led_brightness brightness)
>> +{
>> +    mutex_lock(&led->lock);
>> +
>> +    if (!brightness) {
>> +        regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION2,
>> +                   RT5033_FLED_FUNC2_MASK, 0x0);
>> +    } else {
>> +        regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION1,
>> +                   RT5033_FLED_FUNC1_MASK, RT5033_FLED_PINCTRL);
>> +        regmap_update_bits(led->regmap,    RT5033_REG_FLED_CTRL1,
>> +                   RT5033_FLED_CTRL1_MASK,
>> +                   (brightness - 1) << 4);
>> +        regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION2,
>> +                   RT5033_FLED_FUNC2_MASK, RT5033_FLED_ENFLED);
>> +    }
>> +
>> +    mutex_unlock(&led->lock);
>> +}
>> +
>> +static void rt5033_brightness_set_work(struct work_struct *work)
>> +{
>> +    struct rt5033_led *led =
>> +        container_of(work, struct rt5033_led, work_brightness_set);
>> +
>> +    rt5033_brightness_set(led, led->torch_brightness);
>> +}
>> +
>> +static void rt5033_led_brightness_set(struct led_classdev *led_cdev,
>> +                      enum led_brightness brightness)
>> +{
>> +    struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
>> +    struct rt5033_led *led = flcdev_to_led(fled_cdev);
>> +
>> +    led->torch_brightness = brightness;
>> +    schedule_work(&led->work_brightness_set);
>> +}
>> +
>> +static int rt5033_led_brightness_set_sync(struct led_classdev *led_cdev,
>> +                      enum led_brightness brightness)
>> +{
>> +    struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
>> +    struct rt5033_led *led = flcdev_to_led(fled_cdev);
>> +
>> +    rt5033_brightness_set(led, brightness);
>> +
>> +    return 0;
>> +}
>> +
>> +static void rt5033_init_flash_properties(struct led_classdev_flash *fled_cdev,
>> +                     struct rt5033_led_config_data *cfg)
>> +{
>> +    struct led_flash_setting *tm_set, *fl_set;
>> +
>> +    tm_set = &fled_cdev->timeout;
>> +    tm_set->min = RT5033_LED_FLASH_TIMEOUT_MIN;
>> +    tm_set->max = cfg->flash_max_timeout;
>> +    tm_set->step = RT5033_LED_FLASH_TIMEOUT_STEP;
>> +    tm_set->val = cfg->flash_max_timeout;
>> +
>> +    fl_set = &fled_cdev->brightness;
>> +    fl_set->min = RT5033_LED_FLASH_BRIGHTNESS_MIN;
>> +    fl_set->max = cfg->flash_max_microamp;
>> +    fl_set->step = RT5033_LED_FLASH_BRIGHTNESS_STEP;
>> +    fl_set->val = cfg->flash_max_microamp;
>> +}
>> +
>> +static int rt5033_led_parse_dt(struct rt5033_led *led, struct device *dev,
>> +                   struct rt5033_led_config_data *cfg)
>> +{
>> +    struct device_node *np = dev->of_node;
>> +    struct device_node *child_node;
>> +    int ret = 0;
>> +
>> +    if (!np)
>> +        return -ENXIO;
>> +
>> +    child_node = of_get_next_available_child(np, NULL);
>> +    if (!child_node) {
>> +        dev_err(dev, "DT child node isn't found\n");
>> +        return -EINVAL;
>> +    }
>> +
>> +    led->fled_cdev.led_cdev.name =
>> +        of_get_property(child_node, "label", NULL) ? : child_node->name;
>> +
>> +    ret = of_property_read_u32(child_node, "led-max-microamp",
>> +                   &cfg->torch_max_microamp);
>> +    if (ret) {
>> +        dev_err(dev, "failed to parse led-max-microamp\n");
>> +        return ret;
> 
> You need to release of_node reference before returning.
> Add a label before of_node_put below, and goto there from here.
> 

I understand what you are saying.
I'd fix like that.

>> +    }
>> +
>> +    ret = of_property_read_u32(child_node, "flash-max-microamp",
>> +                   &cfg->flash_max_microamp);
>> +    if (ret) {
>> +        dev_err(dev, "failed to parse flash-max-microamp\n");
>> +        return ret;
> 
> Same situation here.
> 
>> +    }
>> +
>> +    ret = of_property_read_u32(child_node, "flash-max-timeout-us",
>> +                   &cfg->flash_max_timeout);
>> +    if (ret)
>> +        dev_err(dev, "failed to parse flash-max-timeout-us\n");
>> +
>> +    of_node_put(child_node);
>> +
>> +    return ret;
>> +}
>> +
>> +static int rt5033_led_flash_brightness_set(struct led_classdev_flash *fled_cdev,
>> +                       u32 brightness)
>> +{
>> +    struct rt5033_led *led = flcdev_to_led(fled_cdev);
>> +    u32 flash_brightness_offset;
>> +
>> +    mutex_lock(&led->lock);
>> +
>> +    flash_brightness_offset =
>> +        RT5033_LED_CONFIG_DATA_OFFSET(fled_cdev->brightness.val,
>> +                          fled_cdev->brightness.step,
>> +                          fled_cdev->brightness.min);
>> +
>> +    regmap_update_bits(led->regmap,    RT5033_REG_FLED_STROBE_CTRL1,
>> +               RT5033_FLED_STRBCTRL1_MASK, flash_brightness_offset);
>> +
>> +    mutex_unlock(&led->lock);
>> +
>> +    return 0;
>> +}
>> +
>> +static int rt5033_led_flash_timeout_set(struct led_classdev_flash *fled_cdev,
>> +                    u32 timeout)
>> +{
>> +    struct rt5033_led *led = flcdev_to_led(fled_cdev);
>> +    u32 flash_tm_offset;
>> +
>> +    mutex_lock(&led->lock);
>> +
>> +    flash_tm_offset =
>> +        RT5033_LED_CONFIG_DATA_OFFSET(fled_cdev->timeout.val,
>> +                          fled_cdev->timeout.step,
>> +                          fled_cdev->timeout.min);
>> +
>> +    regmap_update_bits(led->regmap,    RT5033_REG_FLED_STROBE_CTRL2,
>> +               RT5033_FLED_STRBCTRL2_MASK, flash_tm_offset);
>> +
>> +    mutex_unlock(&led->lock);
>> +
>> +    return 0;
>> +}
>> +
>> +static int rt5033_led_flash_strobe_set(struct led_classdev_flash *fled_cdev,
>> +                       bool state)
>> +{
>> +    struct rt5033_led *led = flcdev_to_led(fled_cdev);
>> +
>> +    mutex_lock(&led->lock);
>> +
>> +    regmap_update_bits(led->regmap,    RT5033_REG_FLED_FUNCTION2,
>> +               RT5033_FLED_FUNC2_MASK, RT5033_FLED_ENFLED);
>> +
>> +    if (state) {
>> +        regmap_update_bits(led->regmap,    RT5033_REG_FLED_FUNCTION1,
>> +                   RT5033_FLED_FUNC1_MASK, RT5033_FLED_STRB_SEL
>> +                   | RT5033_FLED_PINCTRL);
>> +        regmap_update_bits(led->regmap,    RT5033_REG_FLED_FUNCTION2,
>> +                   RT5033_FLED_FUNC2_MASK, RT5033_FLED_ENFLED
>> +                   | RT5033_FLED_SREG_STRB);
>> +    }
>> +    fled_cdev->led_cdev.brightness = LED_OFF;
>> +
>> +    mutex_unlock(&led->lock);
>> +
>> +    return 0;
>> +}
>> +
>> +static const struct led_flash_ops flash_ops = {
>> +    .flash_brightness_set = rt5033_led_flash_brightness_set,
>> +    .strobe_set = rt5033_led_flash_strobe_set,
>> +    .timeout_set = rt5033_led_flash_timeout_set,
>> +};
>> +
>> +static int rt5033_led_probe(struct platform_device *pdev)
>> +{
>> +    struct rt5033_dev *rt5033 = dev_get_drvdata(pdev->dev.parent);
>> +    struct rt5033_led *led;
>> +    struct led_classdev *led_cdev;
>> +    struct rt5033_led_config_data led_cfg;
>> +    int ret;
>> +
>> +    led = devm_kzalloc(&pdev->dev, sizeof(*led), GFP_KERNEL);
>> +    if (!led)
>> +        return -ENOMEM;
>> +
>> +    platform_set_drvdata(pdev, led);
>> +    led->dev = &pdev->dev;
>> +    led->regmap = rt5033->regmap;
>> +
>> +    ret = rt5033_led_parse_dt(led, &pdev->dev, &led_cfg);
>> +    if (ret)
>> +        return ret;
>> +
>> +    mutex_init(&led->lock);
>> +    INIT_WORK(&led->work_brightness_set, rt5033_brightness_set_work);
>> +
>> +    rt5033_init_flash_properties(&led->fled_cdev, &led_cfg);
>> +    led->fled_cdev.ops = &flash_ops;
>> +    led_cdev = &led->fled_cdev.led_cdev;
>> +
>> +    led_cdev->max_brightness =
>> +        RT5033_LED_CONFIG_DATA_OFFSET(led_cfg.torch_max_microamp,
>> +                          RT5033_LED_TORCH_BRIGHTNESS_STEP,
>> +                          RT5033_LED_TORCH_BRIGHTNESS_MIN);
>> +
>> +    led_cdev->brightness_set = rt5033_led_brightness_set;
>> +    led_cdev->brightness_set_sync = rt5033_led_brightness_set_sync;
>> +    led_cdev->flags |= LED_CORE_SUSPENDRESUME | LED_DEV_CAP_FLASH;
>> +
>> +    ret = led_classdev_flash_register(&pdev->dev, &led->fled_cdev);
>> +    if (ret < 0) {
>> +        dev_err(&pdev->dev, "can't register LED %s\n", led_cdev->name);
>> +        mutex_destroy(&led->lock);
>> +        return ret;
>> +    }
>> +
>> +    regmap_update_bits(led->regmap,    RT5033_REG_FLED_FUNCTION1,
>> +               RT5033_FLED_FUNC1_MASK, RT5033_FLED_RESET);
>> +
>> +    return 0;
>> +}
>> +
>> +static int rt5033_led_remove(struct platform_device *pdev)
>> +{
>> +    struct rt5033_led *led = platform_get_drvdata(pdev);
>> +
>> +    led_classdev_flash_unregister(&led->fled_cdev);
>> +    cancel_work_sync(&led->work_brightness_set);
>> +
>> +    mutex_destroy(&led->lock);
>> +
>> +    return 0;
>> +}
>> +
>> +static const struct platform_device_id rt5033_led_id[] = {
>> +    { "rt5033-led", },
>> +    { /* sentinel */ },
>> +};
>> +MODULE_DEVICE_TABLE(platform, rt5033_led_id);
> 
> You're using only DT, please remove above MODULE_DEVICE_TABLE and
> rt5033_led_id definition.
> 

Okay, I'd remove it.

>> +static const struct of_device_id rt5033_led_match[] = {
>> +    { .compatible = "richtek,rt5033-led", },
>> +    { /* sentinel */ },
>> +};
>> +MODULE_DEVICE_TABLE(of, rt5033_led_match);
>> +
>> +static struct platform_driver rt5033_led_driver = {
>> +    .driver = {
>> +        .name = "rt5033-led",
>> +        .of_match_table = rt5033_led_match,
>> +    },
>> +    .probe        = rt5033_led_probe,
>> +    .id_table    = rt5033_led_id,
>> +    .remove        = rt5033_led_remove,
>> +};
>> +module_platform_driver(rt5033_led_driver);
>> +
>> +MODULE_AUTHOR("Ingi Kim <ingi2.kim@xxxxxxxxxxx>");
>> +MODULE_DESCRIPTION("Richtek RT5033 LED driver");
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_ALIAS("platform:rt5033-led");
>> diff --git a/include/linux/mfd/rt5033-private.h b/include/linux/mfd/rt5033-private.h
>> index 1b63fc2..c8e99e4 100644
>> --- a/include/linux/mfd/rt5033-private.h
>> +++ b/include/linux/mfd/rt5033-private.h
>> @@ -93,6 +93,55 @@ enum rt5033_reg {
>>   #define RT5033_RT_CTRL1_UUG_MASK    0x02
>>   #define RT5033_RT_HZ_MASK        0x01
>>
>> +/* RT5033 FLED Function1 register */
>> +#define RT5033_FLED_FUNC1_MASK        0x94
>> +#define RT5033_FLED_STRB_SEL        0x04
>> +#define RT5033_FLED_PINCTRL        0x10
>> +#define RT5033_FLED_RESET        0x80
>> +
>> +/* RT5033 FLED Function2 register */
>> +#define RT5033_FLED_FUNC2_MASK        0x81
>> +#define RT5033_FLED_ENFLED        0x01
>> +#define RT5033_FLED_SREG_STRB        0x80
>> +
>> +/* RT5033 FLED Strobe Control1 */
>> +#define RT5033_FLED_STRBCTRL1_MASK        0xFF
>> +#define RT5033_FLED_STRBCTRL1_TM_CUR_MAX    0xE0
>> +#define RT5033_FLED_STRBCTRL1_FL_CUR_DEF    0x0D
>> +#define RT5033_FLED_STRBCTRL1_FL_CUR_MAX    0x1F
>> +
>> +/* RT5033 FLED Strobe Control2 */
>> +#define RT5033_FLED_STRBCTRL2_MASK    0x3F
>> +#define RT5033_FLED_STRBCTRL2_TM_DEF    0x0F
>> +#define RT5033_FLED_STRBCTRL2_TM_MAX    0x3F
>> +
>> +/* RT5033 FLED Control1 */
>> +#define RT5033_FLED_CTRL1_MASK        0xF7
>> +#define RT5033_FLED_CTRL1_TORCH_CUR_DEF    0x20
>> +#define RT5033_FLED_CTRL1_TORCH_CUR_MAX    0xF0
>> +#define RT5033_FLED_CTRL1_LBP_DEF    0x02
>> +#define RT5033_FLED_CTRL1_LBP_MAX    0x07
>> +
>> +/* RT5033 FLED Control2 */
>> +#define RT5033_FLED_CTRL2_MASK        0xFF
>> +#define RT5033_FLED_CTRL2_VMID_DEF    0x37
>> +#define RT5033_FLED_CTRL2_VMID_MAX    0x3F
>> +#define RT5033_FLED_CTRL2_TRACK_ALIVE    0x40
>> +#define RT5033_FLED_CTRL2_MID_TRACK    0x80
>> +
>> +/* RT5033 FLED Control4 */
>> +#define RT5033_FLED_CTRL4_MASK        0xE0
>> +#define RT5033_FLED_CTRL4_RESV        0x14
>> +#define RT5033_FLED_CTRL4_VTRREG_DEF    0x40
>> +#define RT5033_FLED_CTRL4_VTRREG_MAX    0x60
>> +#define RT5033_FLED_CTRL4_TRACK_CLK    0x80
>> +
>> +/* RT5033 FLED Control5 */
>> +#define RT5033_FLED_CTRL5_MASK        0xC0
>> +#define RT5033_FLED_CTRL5_RESV        0x10
>> +#define RT5033_FLED_CTRL5_TA_GOOD    0x40
>> +#define RT5033_FLED_CTRL5_TA_EXIST    0x80
>> +
>>   /* RT5033 control register */
>>   #define RT5033_CTRL_FCCM_BUCK_MASK        0x00
>>   #define RT5033_CTRL_BUCKOMS_MASK        0x01
>> diff --git a/include/linux/mfd/rt5033.h b/include/linux/mfd/rt5033.h
>> index 6cff5cf..11f6d48 100644
>> --- a/include/linux/mfd/rt5033.h
>> +++ b/include/linux/mfd/rt5033.h
>> @@ -15,6 +15,7 @@
>>   #include <linux/regulator/consumer.h>
>>   #include <linux/i2c.h>
>>   #include <linux/regmap.h>
>> +#include <linux/led-class-flash.h>
>> +
>>   #include <linux/power_supply.h>
>>
>>   /* RT5033 regulator IDs */
>> @@ -59,4 +60,16 @@ struct rt5033_charger {
>>       struct rt5033_charger_data    *chg;
>>   };
>>
>> +/* RT5033 Flash led platform data */
>> +struct rt5033_led {
>> +    struct device        *dev;
>> +    struct led_classdev_flash fled_cdev;
>> +    struct mutex        lock;
>> +    struct rt5033_dev    *rt5033;
> 
> You don't use this field in the driver.
> 

Check, I'd remove it.

>> +    struct regmap        *regmap;
>> +    struct work_struct    work_brightness_set;
>> +
>> +    enum led_brightness    torch_brightness;
>> +};
> 
> Move this struct to leds-rt5033.c. It is not being
> used in drivers/mfd/rt5033.c. You could avoid including
> linux/led-class-flash.h then, too.
> 

Right, This struct is only used to rt5033 led driver.
I should move it.

>> +
>>   #endif /* __RT5033_H__ */
>>
> 
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux