Hi Shirish, I have merged the re-factoring patch set from Sean Paul to exynos-drm-next. Can you re-base your patch set at top of exynos-drm-next? Thanks, Inki Dae > -----Original Message----- > From: Shirish S [mailto:s.shirish@xxxxxxxxxxx] > Sent: Monday, October 28, 2013 7:39 PM > To: dri-devel@xxxxxxxxxxxxxxxxxxxxx; inki.dae@xxxxxxxxxxx; > devicetree@xxxxxxxxxxxxxxx > Cc: seanpaul@xxxxxxxxxxxx; sw0312.kim@xxxxxxxxxxx; mark.rutland@xxxxxxx; > shirish@xxxxxxxxxxxx; Shirish S > Subject: [PATCH 0/3] Add dt support for exynos hdmiphy settings > > For various revisions of a chipset if the signal pattern is changed for > every > revision, then the phy setting need to be updated correspondingly by > measuring > the signal. > For getting correct signals the clock level and data de-emphasis > levels needs to be adjusted. > Since only these 2 values matter,we can move the same to dt, > wherein we can have different dt files for every revision. > > This is an initial patchset towards achieving the same > for exynos 5250 and can be later extended to future chipsets. > > V2: replaced moving of entire phy config structure with only > required and justifiable conf registers. > > V3: Incorporated Mark Rutland's comments. > > Shirish S (3): > ARM: dts: smdk5250: Add hdmi phy settings > ARM: dts: arndale: Add hdmi phy settings > drm: exynos: hdmi: Add dt support for hdmiphy settings > > .../devicetree/bindings/video/exynos_hdmi.txt | 32 +++++++++ > arch/arm/boot/dts/exynos5250-arndale.dts | 68 ++++++++++++++++++ > arch/arm/boot/dts/exynos5250-smdk5250.dts | 68 ++++++++++++++++++ > drivers/gpu/drm/exynos/exynos_hdmi.c | 76 ++++++++++++++++++- > - > 4 files changed, 240 insertions(+), 4 deletions(-) > > -- > 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
