Hi,
On Thu, Oct 24, 2013 at 02:46:58PM -0500, Matt Sealey wrote:
> On Thu, Oct 24, 2013 at 10:38 AM, Markus Pargmann <mpa@xxxxxxxxxxxxxx> wrote:
> > imx27 pincontrol driver using the imx1 core driver. The DT bindings are
> > similar to other imx pincontrol drivers.
> >
> > Signed-off-by: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
> > Acked-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> > Acked-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
> > ---
> > .../bindings/pinctrl/fsl,imx27-pinctrl.txt | 50 +++
> > drivers/pinctrl/Kconfig | 8 +
> > drivers/pinctrl/Makefile | 1 +
> > drivers/pinctrl/pinctrl-imx27.c | 477 +++++++++++++++++++++
> > 4 files changed, 536 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt
> > create mode 100644 drivers/pinctrl/pinctrl-imx27.c
> >
> > diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt
> > new file mode 100644
> > index 0000000..6619968
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt
> > @@ -0,0 +1,50 @@
> > +* Freescale IMX27 IOMUX Controller
> > +
> > +Required properties:
> > +- compatible: "fsl,imx27-iomuxc"
> > +
> > +The iomuxc driver node should define subnodes containing of pinctrl configuration subnodes.
> > +
> > +Required properties for pin configuration node:
> > +- fsl,pins: three integers array, represents a group of pins mux and config
> > + setting. The format is fsl,pins = <PIN MUX_ID CONFIG>. PIN and MUX_ID are
> > + defined as macros in arch/arm/boot/dts/imx27-pinfunc.h. CONFIG can be 0 or
>
> Can we get away from this concept that a binding is predicated on the
> fact that they're preprocessed? You're getting it half right.. as
> below.
>
> Binding descriptions must NOT rely on preprocessing helpers, for the
> following reasons
>
> * Device trees could be generated by methods other than preprocessed source
> * Device trees could be generated by Linux builds and passed to other
> operating systems (therefore they need to know the definition in
> reality).
>
> Please provide and describe the RAW data format of the property and
> then somewhere afterwards mention that as a convenience there are
> preprocessor macros which make life easier. You can also mention the
> include name, but the path (arch/arm/boot/dts) may not be fixed. This
> may not even be Linux. They may be split elsewhere in a separate tree
> that has no OS and therefore a different layout. Bindings should be OS
> agnostic - certainly source code location agnostic - where possible.
>
> > + PIN is a integer between 0 and 0xbf
>
> Correct.
>
> > imx27 has 6 ports with 32 configurable
> > + configurable pins each. PIN is PORT * 32 + PORT_PIN, PORT_PIN is the pin
> > + number on the specific port (between 0 and 31).
>
> Correct.
>
> > + MUX_ID is
> > + function + (direction << 2) + (gpio_oconf << 4) + (gpio_iconfa << 8) + (gpio_iconfb << 10)
> > + function: 0 - Primary function
> > + 1 - Alternate function
> > + 2 - GPIO
> > + direction: 0 - Input
> > + 1 - Output
> > + gpio_oconf: 0 - A_IN
> > + 1 - B_IN
> > + 2 - C_IN
> > + 3 - Data Register
> > + gpio_iconfa/b: 0 - GPIO_IN
> > + 1 - Interrupt Status Register
> > + 2 - 0
> > + 3 - 1
>
> Correct, but I don't like mixing register values for multiple
> registers in a single field. I guess you'd waste a ton of space any
> other way, so acceptable.
>
> If they're the bits for a single register (could be, but I don't have
> access to an i.MX27 manual right now) then just describe it as the
> content of the register as defined in a location in the manual, you
> won't need to re-describe what is already in the manual.
Unfortunately it is not the content of a single register. It is spreaded
across multiple registers each one containing the configuration of all
pins of one port.
The above described parts are nearly identical to the real registers.
"direction", "gpio_oconf" and "gpio_iconfa/b" exist as registers.
"function" is describing two registers, "GIUS" (GPIO in use) and "GPR"
(General Purpose Register). function is (GIUS << 1) + GPR.
I will add the registernames to the documentation.
>
> > +Example:
> > +
> > +iomuxc: iomuxc@10015000 {
> > + compatible = "fsl,imx27-iomuxc";
> > + reg = <0x10015000 0x600>;
> > +
> > + uart {
> > + pinctrl_uart1: uart-1 {
> > + fsl,pins = <
> > + MX27_PAD_UART1_TXD__UART1_TXD 0x0
>
> Incorrect.
>
> Your example should show the raw output. Try compiling this and then
> performing the following:
>
> scripts/dtc/dtc -I dtb -O dts imx27-my-platform.dtb
>
> The place where pinctrl_uart1 is in that output is your example. Lots
> of awful, unreadable numbers.
>
> However you may provide a second example explaining the convenience of
> using the preprocessor macros exactly as above, perhaps with the
> location of the preprocessor macros include.
Okay, I will change the example and add some documentation about the
macros at the end of the document.
>
> > + MX27_PAD_UART1_RXD__UART1_RXD 0x0
>
> One question; are these definitions the one in the manual (for the
> names etc, in the huge enums later, especially?) or stripped from
> existing source code?
The definitions are from the manual
MX27_PAD_<Pad name>__<Signal name>
Thanks,
Markus Pargmann
>
> Bindings - and their preprocessor helper macros - should follow the
> latest manual if they can. There are many odd differences in i.MX6
> pinctrl, but for instance if the manual describes it as SD_DAT3 with
> function SD_DATA3 then it should be SD_DAT3__SD_DATA3 rather than
> SD_DAT3__SD_DAT3 (even if the SD Association spec says DAT3, since you
> are describing an i.MX27 mux, not the SD physical layer :). That way
> the preprocessor definitions can be searched for in the manual with
> some mangling, and searched for in the headers by pasting out the
> function name or the original pin name. If they differ, then someone
> has to resolve the differences with their brain which is more work for
> the reader.
>
> Thanks,
> Matt Sealey <neko@xxxxxxxxxxxxx>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
