On Oct 24, 2013, at 5:43 AM, Sricharan R wrote:
> Hi Kumar,
>
> On Thursday 24 October 2013 03:03 PM, Kumar Gala wrote:
>> On Sep 30, 2013, at 8:59 AM, Sricharan R wrote:
>>
>>> Some socs have a large number of interrupts requests to service
>>> the needs of its many peripherals and subsystems. All of the
>>> interrupt lines from the subsystems are not needed at the same
>>> time, so they have to be muxed to the irq-controller appropriately.
>>> In such places a interrupt controllers are preceded by an CROSSBAR
>>> that provides flexibility in muxing the device requests to the controller
>>> inputs.
>>>
>>> This driver takes care a allocating a free irq and then configuring the
>>> crossbar IP as a part of the mpu's irqchip callbacks. crossbar_init should
>>> be called right before the irqchip_init, so that it is setup to handle the
>>> irqchip callbacks.
>>>
>>> Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
>>> Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
>>> Cc: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
>>> Cc: Russell King <linux@xxxxxxxxxxxxxxxx>
>>> Cc: Tony Lindgren <tony@xxxxxxxxxxx>
>>> Cc: Rajendra Nayak <rnayak@xxxxxx>
>>> Cc: Marc Zyngier <marc.zyngier@xxxxxxx>
>>> Cc: Grant Likely <grant.likely@xxxxxxxxxx>
>>> Cc: Rob Herring <rob.herring@xxxxxxxxxxx>
>>> Signed-off-by: Sricharan R <r.sricharan@xxxxxx>
>>> ---
>>> .../devicetree/bindings/arm/omap/crossbar.txt | 27 +++
>>> drivers/irqchip/Kconfig | 8 +
>>> drivers/irqchip/Makefile | 1 +
>>> drivers/irqchip/irq-crossbar.c | 195 ++++++++++++++++++++
>>> include/linux/irqchip/irq-crossbar.h | 11 ++
>>> 5 files changed, 242 insertions(+)
>>> create mode 100644 Documentation/devicetree/bindings/arm/omap/crossbar.txt
>>> create mode 100644 drivers/irqchip/irq-crossbar.c
>>> create mode 100644 include/linux/irqchip/irq-crossbar.h
>>>
>>> diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
>>> new file mode 100644
>>> index 0000000..cdec2cd
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
>>> @@ -0,0 +1,27 @@
>>> +Some socs have a large number of interrupts requests to service
>>> +the needs of its many peripherals and subsystems. All of the
>>> +interrupt lines from the subsystems are not needed at the same
>>> +time, so they have to be muxed to the irq-controller appropriately.
>>> +In such places a interrupt controllers are preceded by an CROSSBAR
>>> +that provides flexibility in muxing the device requests to the controller
>>> +inputs.
>>> +
>>> +Required properties:
>>> +- compatible : Should be "ti,irq-crossbar"
>>> +- reg: Base address and the size of the crossbar registers.
>>> +- max-irqs: Total number of irqs available at the interrupt controller.
>> Should be 'ti,max-irqs
> Ok, will correct.
>>> +- reg-size: Size of a individual register in bytes. Every individual
>>> + register is assumed to be of same size. Valid sizes are 1, 2, 4.
>> Is this something that really needs to be encoded in the dts?
>>
>> If we keep it should be ti,reg-size
> Currently, this is the only IP with a fixed register-size.
> So this can be in the driver also. I thought keeping it
> DT will avoid any hard-coding in driver.
I'd go with less in the DT at this point, if in the future you need this you can always add it later.
>>> +- irqs-reserved: List of the reserved irq lines that are not muxed using
>>> + crossbar. These interrupt lines are reserved in the soc,
>>> + so crossbar bar driver should not consider them as free
>>> + lines.
>>> +
>> ti,irqs-reserved
> Ok, will correct
>>> +Examples:
>>> + crossbar_mpu: @4a020000 {
>> Did you mean for there to be a label and no node name?
>>
> ya, name is missing. Will add.
>>> + compatible = "ti,irq-crossbar";
>>> + reg = <0x4a002a48 0x130>;
>>> + max-irqs = <160>;
>>> + reg-size = <2>;
>>> + irqs-reserved = <0 1 2 3 5 6 131 132 139 140>;
>>> + };
>
> Regards,
> Sricharan
- k
--
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
