Uart1, fec, i2c1,esdhc1 and audmux were added.
I also added a label to the iomuxc device node like in:
7b7d672 ARM i.MX dts: Consistently add labels to devicenodes
Cc: Rob Herring <rob.herring@xxxxxxxxxxx>
Cc: Pawel Moll <pawel.moll@xxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: Stephen Warren <swarren@xxxxxxxxxxxxx>
Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: Sascha Hauer <kernel@xxxxxxxxxxxxxx>
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: Eric Bénard <eric@xxxxxxxxxx>
Signed-off-by: Denis Carikli <denis@xxxxxxxxxx>
---
arch/arm/boot/dts/imx25.dtsi | 104 +++++++++++++++++++++++++++++++++++++++++-
1 file changed, 103 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index 5f9879d..6ac4c98 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -174,9 +174,111 @@
status = "disabled";
};
- iomuxc@43fac000{
+ iomuxc: iomuxc@43fac000 {
compatible = "fsl,imx25-iomuxc";
reg = <0x43fac000 0x4000>;
+
+ audmux {
+ pinctrl_audmux_1: audmuxgrp-1 {
+ fsl,pins = <
+ MX25_PAD_KPP_COL3__AUD5_TXFS 0xe0
+ MX25_PAD_KPP_COL2__AUD5_TXC 0xe0
+ MX25_PAD_KPP_COL1__AUD5_RXD 0xe0
+ MX25_PAD_KPP_COL0__AUD5_TXD 0xe0
+ >;
+ };
+ };
+
+ esdhc1 {
+ pinctrl_esdhc1_1: esdhc1grp-1 {
+ fsl,pins = <
+ MX25_PAD_SD1_CMD__SD1_CMD 0x400000c0
+ MX25_PAD_SD1_CLK__SD1_CLK 0x400000c0
+ MX25_PAD_SD1_DATA0__SD1_DATA0 0x400000c0
+ MX25_PAD_SD1_DATA1__SD1_DATA1 0x400000c0
+ MX25_PAD_SD1_DATA2__SD1_DATA2 0x400000c0
+ MX25_PAD_SD1_DATA3__SD1_DATA3 0x400000c0
+ >;
+ };
+ };
+
+ fec {
+ pinctrl_fec_1: fecgrp-1 {
+ fsl,pins = <
+ MX25_PAD_FEC_MDC__FEC_MDC 0x80000000
+ MX25_PAD_FEC_MDIO__FEC_MDIO 0x400001e0
+ MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000
+ MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000
+ MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
+ MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000
+ MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000
+ MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000
+ MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1c0
+ >;
+ };
+ };
+
+ i2c1 {
+ pinctrl_i2c1_1: i2c1grp-1 {
+ fsl,pins = <
+ MX25_PAD_I2C1_CLK__I2C1_CLK 0x80000000
+ MX25_PAD_I2C1_DAT__I2C1_DAT 0x80000000
+ >;
+ };
+ };
+
+ lcdc {
+ pinctrl_lcdc_1: lcdcgrp-1 {
+ fsl,pins = <
+ MX25_PAD_LD0__LD0 0x1
+ MX25_PAD_LD1__LD1 0x1
+ MX25_PAD_LD2__LD2 0x1
+ MX25_PAD_LD3__LD3 0x1
+ MX25_PAD_LD4__LD4 0x1
+ MX25_PAD_LD5__LD5 0x1
+ MX25_PAD_LD6__LD6 0x1
+ MX25_PAD_LD7__LD7 0x1
+ MX25_PAD_LD8__LD8 0x1
+ MX25_PAD_LD9__LD9 0x1
+ MX25_PAD_LD10__LD10 0x1
+ MX25_PAD_LD11__LD11 0x1
+ MX25_PAD_LD12__LD12 0x1
+ MX25_PAD_LD13__LD13 0x1
+ MX25_PAD_LD14__LD14 0x1
+ MX25_PAD_LD15__LD15 0x1
+ MX25_PAD_GPIO_E__LD16 0x1
+ MX25_PAD_GPIO_F__LD17 0x1
+
+ MX25_PAD_HSYNC__HSYNC 0x80000000
+ MX25_PAD_VSYNC__VSYNC 0x80000000
+ MX25_PAD_LSCLK__LSCLK 0x80000000
+ MX25_PAD_OE_ACD__OE_ACD 0x80000000
+ MX25_PAD_CONTRAST__CONTRAST 0x80000000
+ >;
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1_1: uart1grp-1 {
+ fsl,pins = <
+ MX25_PAD_UART1_RTS__UART1_RTS 0xe0
+ MX25_PAD_UART1_CTS__UART1_CTS 0xe0
+ MX25_PAD_UART1_TXD__UART1_TXD 0x80000000
+ MX25_PAD_UART1_RXD__UART1_RXD 0xc0
+ >;
+ };
+ };
+
+ uart2 {
+ pinctrl_uart2_1: uart2grp-1 {
+ fsl,pins = <
+ MX25_PAD_UART2_RXD__UART2_RXD 0x80000000
+ MX25_PAD_UART2_TXD__UART2_TXD 0x80000000
+ MX25_PAD_UART2_RTS__UART2_RTS 0x80000000
+ MX25_PAD_UART2_CTS__UART2_CTS 0x80000000
+ >;
+ };
+ };
};
audmux@43fb0000 {
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
