Add RX51_LCD_RESET_GPIO pin mux information to display. Signed-off-by: Sebastian Reichel <sre@xxxxxxxxxx> --- arch/arm/boot/dts/omap3-n900.dts | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 999a80c..5afbd28 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -124,6 +124,12 @@ 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */ >; }; + + display_pins: pinmux_display_pins { + pinctrl-single,pins = < + 0x0d4 (PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */ + >; + }; }; &i2c1 { @@ -361,6 +367,9 @@ compatible = "acx565akm"; spi-max-frequency = <6000000>; reg = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&display_pins>; }; }; -- 1.8.4.rc3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html