On Sat, Oct 19, 2013 at 01:04:59PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 17:02 Thu 17 Oct , Denis Carikli wrote:
> > diff --git a/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt b/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt
> > new file mode 100644
> > index 0000000..ae0b343
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt
> > @@ -0,0 +1,52 @@
> > +Freescale mx3 Framebuffer
> > +
> > +This framebuffer driver supports the imx31 and imx35 devices.
> > +
> > +Required properties:
> > +- compatible : Must be "fsl,mx3-fb".
> > +- reg : Should contain 1 register ranges(address and length).
> > +- dmas : Phandle to the ipu dma node as described in
> > + Documentation/devicetree/bindings/dma/dma.txt
> > +- dma-names : Must be "tx".
> > +- clocks : Phandle to the ipu source clock.
> > +- display: Phandle to a display node as described in
> > + Documentation/devicetree/bindings/video/display-timing.txt
> > + Additional, the display node has to define properties:
> > + - bits-per-pixel: lcd panel bit-depth.
> > +
> > +Optional properties:
> > +- ipu-disp-format: could be "rgb666", "rgb565", or "rgb888".
> > + If not specified defaults to "rgb666".
> > +
> > +Example:
> > +
> > + lcdc: mx3fb@53fc00b4 {
> > + compatible = "fsl,mx3-fb";
> > + reg = <0x53fc00b4 0x0b>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_lcdc_1>;
> > + clocks = <&clks 55>;
> > + dmas = <&ipu 14>;
> > + dma-names = "tx";
> > + };
As mentioned to the v1 patch: This should really be closer to the IPUv3
binding. IPUv1 and IPUv3 are very similar hardwares. Having two
different bindings for it is painful.
Implementing IPUv1 as a DMA driver was the wrong decision back then, now
exposing the IPU to dt using the DMA binding makes it worse.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
