Dove has a Power Management Unit with its own interrupt
controller. This is chained on the main interrupt controller. Add a
driver, making use of generic chip where possible.
Signed-off-by: Andrew Lunn <andrew@xxxxxxx>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
cc: devicetree@xxxxxxxxxxxxxxx
cc: pawel.moll@xxxxxxx
cc: mark.rutland@xxxxxxx
cc: swarren@xxxxxxxxxxxxx
cc: ian.campbell@xxxxxxxxxx
---
Removed an unneeded blank line
Added Sebastians Tested-By
.../interrupt-controller/marvell,dove-pmu-intc.txt | 17 +++
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-dove.c | 126 +++++++++++++++++++++
3 files changed, 144 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/marvell,dove-pmu-intc.txt
create mode 100644 drivers/irqchip/irq-dove.c
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,dove-pmu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,dove-pmu-intc.txt
new file mode 100644
index 0000000..1feb582
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,dove-pmu-intc.txt
@@ -0,0 +1,17 @@
+Marvell Dove Power Management Unit interrupt controller
+
+Required properties:
+- compatible: shall be "marvell,dove-pmu-intc"
+- reg: base address of PMU interrupt registers starting with CAUSE register
+- interrupts: PMU interrupt of the main interrupt controller
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: number of cells to encode an interrupt source, shall be 1
+
+Example:
+ pmu_intc: pmu-interrupt-ctrl@d0050 {
+ compatible = "marvell,dove-pmu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xd0050 0x8>;
+ interrupts = <33>;
+ };
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index c60b901..f743006 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -1,6 +1,7 @@
obj-$(CONFIG_IRQCHIP) += irqchip.o
obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o
+obj-$(CONFIG_ARCH_DOVE) += irq-dove.o
obj-$(CONFIG_ARCH_EXYNOS) += exynos-combiner.o
obj-$(CONFIG_ARCH_MMP) += irq-mmp.o
obj-$(CONFIG_ARCH_MVEBU) += irq-armada-370-xp.o
diff --git a/drivers/irqchip/irq-dove.c b/drivers/irqchip/irq-dove.c
new file mode 100644
index 0000000..788acd8
--- /dev/null
+++ b/drivers/irqchip/irq-dove.c
@@ -0,0 +1,126 @@
+/*
+ * Marvell Dove SoCs PMU IRQ chip driver.
+ *
+ * Andrew Lunn <andrew@xxxxxxx>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/exception.h>
+#include <asm/mach/irq.h>
+
+#include "irqchip.h"
+
+#define DOVE_PMU_IRQ_CAUSE 0x00
+#define DOVE_PMU_IRQ_MASK 0x04
+
+static void dove_pmu_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ struct irq_domain *d = irq_get_handler_data(irq);
+ struct irq_chip_generic *gc = irq_get_domain_generic_chip(d, 0);
+ u32 stat = readl_relaxed(gc->reg_base + DOVE_PMU_IRQ_CAUSE) &
+ gc->mask_cache;
+
+ while (stat) {
+ u32 hwirq = ffs(stat) - 1;
+
+ generic_handle_irq(irq_find_mapping(d, gc->irq_base + hwirq));
+ stat &= ~(1 << hwirq);
+ }
+}
+
+static void pmu_irq_ack(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct irq_chip_type *ct = irq_data_get_chip_type(d);
+ u32 mask = ~d->mask;
+
+ /*
+ * The PMU mask register is not RW0C: it is RW. This means that
+ * the bits take whatever value is written to them; if you write
+ * a '1', you will set the interrupt.
+ *
+ * Unfortunately this means there is NO race free way to clear
+ * these interrupts.
+ *
+ * So, let's structure the code so that the window is as small as
+ * possible.
+ */
+ irq_gc_lock(gc);
+ mask &= irq_reg_readl(gc->reg_base + ct->regs.ack);
+ irq_reg_writel(mask, gc->reg_base + ct->regs.ack);
+ irq_gc_unlock(gc);
+}
+
+static int __init dove_pmu_irq_init(struct device_node *np,
+ struct device_node *parent)
+{
+ unsigned int clr = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
+ struct resource r;
+ struct irq_domain *domain;
+ struct irq_chip_generic *gc;
+ int ret, irq, nrirqs = 7;
+
+ domain = irq_domain_add_linear(np, nrirqs,
+ &irq_generic_chip_ops, NULL);
+ if (!domain) {
+ pr_err("%s: unable to add irq domain\n", np->name);
+ return -ENOMEM;
+ }
+
+ ret = irq_alloc_domain_generic_chips(domain, nrirqs, 1, np->name,
+ handle_level_irq, clr, 0, IRQ_GC_INIT_MASK_CACHE);
+ if (ret) {
+ pr_err("%s: unable to alloc irq domain gc\n", np->name);
+ return ret;
+ }
+
+ ret = of_address_to_resource(np, 0, &r);
+ if (ret) {
+ pr_err("%s: unable to get resource\n", np->name);
+ return ret;
+ }
+
+ if (!request_mem_region(r.start, resource_size(&r), np->name)) {
+ pr_err("%s: unable to request mem region\n", np->name);
+ return -ENOMEM;
+ }
+
+ /* Map the parent interrupt for the chained handler */
+ irq = irq_of_parse_and_map(np, 0);
+ if (irq <= 0) {
+ pr_err("%s: unable to parse irq\n", np->name);
+ return -EINVAL;
+ }
+
+ gc = irq_get_domain_generic_chip(domain, 0);
+ gc->reg_base = ioremap(r.start, resource_size(&r));
+ if (!gc->reg_base) {
+ pr_err("%s: unable to map resource\n", np->name);
+ return -ENOMEM;
+ }
+
+ gc->chip_types[0].regs.ack = DOVE_PMU_IRQ_CAUSE;
+ gc->chip_types[0].regs.mask = DOVE_PMU_IRQ_MASK;
+ gc->chip_types[0].chip.irq_ack = pmu_irq_ack;
+ gc->chip_types[0].chip.irq_mask = irq_gc_mask_clr_bit;
+ gc->chip_types[0].chip.irq_unmask = irq_gc_mask_set_bit;
+
+ /* mask and clear all interrupts */
+ writel(0, gc->reg_base + DOVE_PMU_IRQ_MASK);
+ writel(0, gc->reg_base + DOVE_PMU_IRQ_CAUSE);
+
+ irq_set_handler_data(irq, domain);
+ irq_set_chained_handler(irq, dove_pmu_irq_handler);
+
+ return 0;
+}
+IRQCHIP_DECLARE(dove_pmu_intc,
+ "marvell,dove-pmu-intc", dove_pmu_irq_init);
--
1.8.4.rc3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
