On 10/18/2013 03:44 AM, Dan Carpenter wrote: > The original code used the wrong parameter to clear tx_atten[]. It > passed the number of elements instead of sizeof() the array to memset. > > The other potential issue was that cphy_base[] wasn't cleared. I'm not > sure if that was a real problem or not, but I have cleared it in my > patch. > > Instead of using memset(), this patch uses empty initializers as a > cleanup. > > Signed-off-by: Dan Carpenter <dan.carpenter@xxxxxxxxxx> Acked-by: Rob Herring <rob.herring@xxxxxxxxxxx> > --- > v2: used {} initialization instead of memset. I also just went ahead > and cleared cphy_base[]. > > diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c > index 7f5e5d9..ea3b3dc 100644 > --- a/drivers/ata/sata_highbank.c > +++ b/drivers/ata/sata_highbank.c > @@ -343,13 +343,11 @@ static int highbank_initialize_phys(struct device *dev, void __iomem *addr) > { > struct device_node *sata_node = dev->of_node; > int phy_count = 0, phy, port = 0, i; > - void __iomem *cphy_base[CPHY_PHY_COUNT]; > - struct device_node *phy_nodes[CPHY_PHY_COUNT]; > - u32 tx_atten[CPHY_PORT_COUNT]; > + void __iomem *cphy_base[CPHY_PHY_COUNT] = {}; > + struct device_node *phy_nodes[CPHY_PHY_COUNT] = {}; > + u32 tx_atten[CPHY_PORT_COUNT] = {}; > > memset(port_data, 0, sizeof(struct phy_lane_info) * CPHY_PORT_COUNT); > - memset(phy_nodes, 0, sizeof(struct device_node*) * CPHY_PHY_COUNT); > - memset(tx_atten, 0xff, CPHY_PORT_COUNT); > > do { > u32 tmp; > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html