Hi Tim,
This patch does not work as it relies on the yet-unmerged clock code
for bcm11351. This patch does not apply to -rc, and when tweaked it
does not compile as it references non-existent bsc_clks.
Has the clk patches been submitted yet ? Applying this will have to
wait until those have been accepted.
thanks,
csd
On Wed, Oct 16, 2013 at 3:01 PM, Tim Kryger <tim.kryger@xxxxxxxxxx> wrote:
> Add the DTS nodes for all the i2c busses in the SoC.
>
> Signed-off-by: Tim Kryger <tim.kryger@xxxxxxxxxx>
> Reviewed-by: Christian Daudt <csd@xxxxxxxxxxxx>
> Reviewed-by: Matt Porter <matt.porter@xxxxxxxxxx>
> Reviewed-by: Markus Mayer <markus.mayer@xxxxxxxxxx>
> ---
> arch/arm/boot/dts/bcm11351.dtsi | 40 ++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 40 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
> index 1246885..4bfd7e3 100644
> --- a/arch/arm/boot/dts/bcm11351.dtsi
> +++ b/arch/arm/boot/dts/bcm11351.dtsi
> @@ -146,6 +146,46 @@
> status = "disabled";
> };
>
> + i2c@3e016000 {
> + compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
> + reg = <0x3e016000 0x80>;
> + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&bsc1_clk>;
> + status = "disabled";
> + };
> +
> + i2c@3e017000 {
> + compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
> + reg = <0x3e017000 0x80>;
> + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&bsc2_clk>;
> + status = "disabled";
> + };
> +
> + i2c@3e018000 {
> + compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
> + reg = <0x3e018000 0x80>;
> + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&bsc3_clk>;
> + status = "disabled";
> + };
> +
> + i2c@3500d000 {
> + compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
> + reg = <0x3500d000 0x80>;
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&pmu_bsc_clk>;
> + status = "disabled";
> + };
> +
> clocks {
> bsc1_clk: bsc1 {
> compatible = "fixed-clock";
> --
> 1.8.0.1
>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
