Add auart2 pins configuration on its main pads
Signed-off-by: Aida Mynzhasova <aida.mynzhasova@xxxxxxxxxx>
---
arch/arm/boot/dts/imx28.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 7363fde..81102b2 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -320,6 +320,19 @@
fsl,pull-up = <0>;
};
+ auart2_pins_a: auart2@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x3080 /* MX28_PAD_AUART2_RX__AUART2_RX */
+ 0x3090 /* MX28_PAD_AUART2_TX__AUART2_TX */
+ 0x30a0 /* MX28_PAD_AUART2_CTS__AUART2_CTS */
+ 0x30b0 /* MX28_PAD_AUART2_RTS__AUART2_RTS */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
auart2_2pins_a: auart2-2pins@0 {
reg = <0>;
fsl,pinmux-ids = <
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
