Re: [PATCH 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 10/15/2013 08:31 AM, Kishon Vijay Abraham I wrote:
> Hi Roger,
> 
> On Monday 14 October 2013 03:51 PM, Roger Quadros wrote:
>> +Vivek
>>
>> On 10/14/2013 12:26 PM, Kishon Vijay Abraham I wrote:
>>> Hi Roger,
>>>
>>> On Friday 11 October 2013 08:39 PM, Roger Quadros wrote:
>>>> Hi,
>>>>
>>>> On 09/02/2013 06:43 PM, Kishon Vijay Abraham I wrote:
>>>>> Adapted dwc3 core to use the Generic PHY Framework. So for init, exit,
>>>>> power_on and power_off the following APIs are used phy_init(), phy_exit(),
>>>>> phy_power_on() and phy_power_off().
>>>>>
>>>>> However using the old USB phy library wont be removed till the PHYs of all
>>>>> other SoC's using dwc3 core is adapted to the Generic PHY Framework.
>>>>>
>>>>> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
>>>>> ---
>>>>>  Documentation/devicetree/bindings/usb/dwc3.txt |    6 ++-
>>>>>  drivers/usb/dwc3/Kconfig                       |    1 +
>>>>>  drivers/usb/dwc3/core.c                        |   49 ++++++++++++++++++++++++
>>>>>  drivers/usb/dwc3/core.h                        |    7 ++++
>>>>>  4 files changed, 61 insertions(+), 2 deletions(-)
>>>>>
>>>>> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
>>>>> index e807635..471366d 100644
>>>>> --- a/Documentation/devicetree/bindings/usb/dwc3.txt
>>>>> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt
>>>>> @@ -6,11 +6,13 @@ Required properties:
>>>>>   - compatible: must be "snps,dwc3"
>>>>>   - reg : Address and length of the register set for the device
>>>>>   - interrupts: Interrupts used by the dwc3 controller.
>>>>> +
>>>>> +Optional properties:
>>>>>   - usb-phy : array of phandle for the PHY device.  The first element
>>>>>     in the array is expected to be a handle to the USB2/HS PHY and
>>>>>     the second element is expected to be a handle to the USB3/SS PHY
>>>>> -
>>>>> -Optional properties:
>>>>> + - phys: from the *Generic PHY* bindings
>>>>> + - phy-names: from the *Generic PHY* bindings
>>>>>   - tx-fifo-resize: determines if the FIFO *has* to be reallocated.
>>>>>  
>>>>>  This is usually a subnode to DWC3 glue to which it is connected.
>>>>> diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
>>>>> index cfc16dd..ad7ce83 100644
>>>>> --- a/drivers/usb/dwc3/Kconfig
>>>>> +++ b/drivers/usb/dwc3/Kconfig
>>>>> @@ -3,6 +3,7 @@ config USB_DWC3
>>>>>  	depends on (USB || USB_GADGET) && GENERIC_HARDIRQS && HAS_DMA
>>>>>  	depends on EXTCON
>>>>>  	select USB_PHY
>>>>> +	select GENERIC_PHY
>>>>>  	select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD
>>>>>  	help
>>>>>  	  Say Y or M here if your system has a Dual Role SuperSpeed
>>>>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>>>>> index 428c29e..485d365 100644
>>>>> --- a/drivers/usb/dwc3/core.c
>>>>> +++ b/drivers/usb/dwc3/core.c
>>>>> @@ -82,6 +82,12 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc)
>>>>>  
>>>>>  	usb_phy_init(dwc->usb2_phy);
>>>>>  	usb_phy_init(dwc->usb3_phy);
>>>>
>>>> How about adding
>>>> +	if (dwc->usb2_phy)
>>>> +		usb_phy_init(dwc->usb2_phy);
>>>> +	if (dwc->usb3_phy)
>>>> +		usb_phy_init(dwc->usb3_phy);
>>>
>>> Thankfully that usb_phy_init will check if phy is NULL.
>>>>
>>>> both usb phy and generic phy shouldn't be present together.
>>>
>>> ok.
>>>>
>>>>> +
>>>>> +	if (dwc->usb2_generic_phy)
>>>>> +		phy_init(dwc->usb2_generic_phy);
>>>>> +	if (dwc->usb3_generic_phy)
>>>>> +		phy_init(dwc->usb3_generic_phy);
>>>>> +
>>>>>  	mdelay(100);
>>>>>  
>>>>>  	/* Clear USB3 PHY reset */
>>>>> @@ -343,6 +349,11 @@ static void dwc3_core_exit(struct dwc3 *dwc)
>>>>>  {
>>>>>  	usb_phy_shutdown(dwc->usb2_phy);
>>>>>  	usb_phy_shutdown(dwc->usb3_phy);
>>>>
>>>> here as well
>>>>
>>>>> +
>>>>> +	if (dwc->usb2_generic_phy)
>>>>> +		phy_power_off(dwc->usb2_generic_phy);
>>>>> +	if (dwc->usb3_generic_phy)
>>>>> +		phy_power_off(dwc->usb3_generic_phy);
>>>>>  }
>>>>>  
>>>>>  #define DWC3_ALIGN_MASK		(16 - 1)
>>>>> @@ -427,6 +438,23 @@ static int dwc3_probe(struct platform_device *pdev)
>>>>>  		dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
>>>>>  	}
>>>>>  
>>>>> +	if (of_property_read_bool(node, "phys") || pdata->has_phy) {
>>>>> +		dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy");
>>>>> +		if (IS_ERR(dwc->usb2_generic_phy)) {
>>>>> +			dev_err(dev, "no usb2 phy configured yet");
>>>>> +			return PTR_ERR(dwc->usb2_generic_phy);
>>>>> +		}
>>>>> +
>>>>> +		dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy");
>>>>> +		if (IS_ERR(dwc->usb3_generic_phy)) {
>>>>> +			dev_err(dev, "no usb3 phy configured yet");
>>>>> +			return PTR_ERR(dwc->usb3_generic_phy);
>>>>> +		}
>>>>
>>>> better to add
>>>> +		/* Don't use USB PHY if generic PHY was found */
>>>> +		dwc->usb2_phy = dwc->usb3_phy = NULL;
>>>
>>> ok.
>>>>
>>>>> +	} else {
>>>>
>>>> not required as we've used kzalloc for dwc.
>>>>
>>>>> +		dwc->usb2_generic_phy = NULL;
>>>>> +		dwc->usb3_generic_phy = NULL;
>>>>> +	}
>>>>> +
>>>>>  	/* default to superspeed if no maximum_speed passed */
>>>>>  	if (dwc->maximum_speed == USB_SPEED_UNKNOWN)
>>>>>  		dwc->maximum_speed = USB_SPEED_SUPER;
>>>>> @@ -450,6 +478,11 @@ static int dwc3_probe(struct platform_device *pdev)
>>>>
>>>> if (dwc->usb2_phy)
>>>>
>>>>>  	usb_phy_set_suspend(dwc->usb2_phy, 0);
>>>>
>>>> if (dwc->usb3_phy)
>>>>
>>>>>  	usb_phy_set_suspend(dwc->usb3_phy, 0);
>>>>>  
>>>>> +	if (dwc->usb2_generic_phy)
>>>>> +		phy_power_on(dwc->usb2_generic_phy);
>>>>> +	if (dwc->usb3_generic_phy)
>>>>> +		phy_power_on(dwc->usb3_generic_phy);
>>>>> +
>>>>>  	spin_lock_init(&dwc->lock);
>>>>>  	platform_set_drvdata(pdev, dwc);
>>>>>  
>>>>> @@ -576,6 +609,11 @@ static int dwc3_remove(struct platform_device *pdev)
>>>>
>>>> if (dwc->usb2_phy)
>>>>>  	usb_phy_set_suspend(dwc->usb2_phy, 1);
>>>>
>>>> if (dwc->usb3_phy)
>>>>>  	usb_phy_set_suspend(dwc->usb3_phy, 1);
>>>>>  
>>>>> +	if (dwc->usb2_generic_phy)
>>>>> +		phy_power_off(dwc->usb2_generic_phy);
>>>>> +	if (dwc->usb3_generic_phy)
>>>>> +		phy_power_off(dwc->usb3_generic_phy);
>>>>> +
>>>>>  	pm_runtime_put(&pdev->dev);
>>>>>  	pm_runtime_disable(&pdev->dev);
>>>>>  
>>>>> @@ -673,6 +711,11 @@ static int dwc3_suspend(struct device *dev)
>>>>
>>>> if (dwc->usb3_phy)
>>>>>  	usb_phy_shutdown(dwc->usb3_phy);
>>>>
>>>> if (dwc->usb2_phy)
>>>>>  	usb_phy_shutdown(dwc->usb2_phy);
>>>>>  
>>>>> +	if (dwc->usb2_generic_phy)
>>>>> +		phy_exit(dwc->usb2_generic_phy);
>>>>> +	if (dwc->usb3_generic_phy)
>>>>> +		phy_exit(dwc->usb3_generic_phy);
>>>>> +
>>>>>  	return 0;
>>>>>  }
>>>>>  
>>>>> @@ -683,6 +726,12 @@ static int dwc3_resume(struct device *dev)
>>>>>  
>>>>
>>>> if (dwc->usb3_phy)
>>>>>  	usb_phy_init(dwc->usb3_phy);
>>>>
>>>> if (dwc->usb2_phy)
>>>>>  	usb_phy_init(dwc->usb2_phy);
>>>>> +
>>>>> +	if (dwc->usb2_generic_phy)
>>>>> +		phy_init(dwc->usb2_generic_phy);
>>>>> +	if (dwc->usb3_generic_phy)
>>>>> +		phy_init(dwc->usb3_generic_phy);
>>>>> +
>>>>>  	msleep(100);
>>>>>  
>>>>>  	spin_lock_irqsave(&dwc->lock, flags);
>>>>> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
>>>>> index f8af8d4..01ec7d7 100644
>>>>> --- a/drivers/usb/dwc3/core.h
>>>>> +++ b/drivers/usb/dwc3/core.h
>>>>> @@ -31,6 +31,8 @@
>>>>>  #include <linux/usb/gadget.h>
>>>>>  #include <linux/usb/otg.h>
>>>>>  
>>>>> +#include <linux/phy/phy.h>
>>>>> +
>>>>>  /* Global constants */
>>>>>  #define DWC3_EP0_BOUNCE_SIZE	512
>>>>>  #define DWC3_ENDPOINTS_NUM	32
>>>>> @@ -613,6 +615,8 @@ struct dwc3_scratchpad_array {
>>>>>   * @dr_mode: requested mode of operation
>>>>>   * @usb2_phy: pointer to USB2 PHY
>>>>>   * @usb3_phy: pointer to USB3 PHY
>>>>> + * @usb2_generic_phy: pointer to USB2 PHY
>>>>> + * @usb3_generic_phy: pointer to USB3 PHY
>>>>>   * @dcfg: saved contents of DCFG register
>>>>>   * @gctl: saved contents of GCTL register
>>>>>   * @is_selfpowered: true when we are selfpowered
>>>>> @@ -665,6 +669,9 @@ struct dwc3 {
>>>>>  	struct usb_phy		*usb2_phy;
>>>>>  	struct usb_phy		*usb3_phy;
>>>>>  
>>>>> +	struct phy		*usb2_generic_phy;
>>>>> +	struct phy		*usb3_generic_phy;
>>>>> +
>>>>>  	void __iomem		*regs;
>>>>>  	size_t			regs_size;
>>>>>  
>>>>>
>>>
>>> Do you have any suggestions on how to get only individual PHYs? like only
>>> usb2phy or usb3phy?
>>
>> My earlier understanding was that both PHYs are needed only if .speed is "super-speed"
>> and only usb2phy is needed for "high-speed". But as per Vivek's email it seems
>> Samsung's exynos5 SoC doesn't need usb2phy for "super-speed".
>>
>> So to keeps things flexible, I can propose the following approach
>> - if speed == 'high-speed' usb2phy must be present. usb3phy will be ignored if supplied.
>> - if speed == 'super-speed' usb3phy must be present and usb2phy is optional but must be
>> initialized if supplied.
>> - if speed is not specified, we default to 'super-speed'.
>>
>> Felipe, does this address the issue you were facing with OMAP5?
> 
> IIRC, even if the speed is high speed, you still need to power on the USB3 PHY.
> Or else even high speed mode wasn't working in OMAP5.

Maybe for OMAP5 we can somehow indicate to dwc3 core code that only 'super-speed' mode
is supported by the platform. I'm not aware of any OMAP5 platform using the USB port as 'high-speed'.

So there needs to be some mechanism for dwc3-<platform>.c to indicate to dwc3-core.c the
speeds supported by the platform. e.g. via of_dev_auxdata through of_platform_populate()?

If such data is not supplied, we assume that both speeds are supported.

cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux