On 10/14/2013 08:26 PM, Mark Rutland wrote:
On Mon, Oct 14, 2013 at 04:42:34PM +0100, Valentine Barshak wrote:
R-Car Gen2 SoCs have a different PHY which is not compatible
with the older R-Car H1 (R8A7779) version.
This adds OF/platform device id tables and PHY initialization
callbacks for the following Gen2 SoCs:
* R-Car H2: R8A7790;
* R-Car M2: R8A7791.
PHY initialization method is chosen, based on the device id.
Default PHY settings are applied for Gen2 SoCs, which should
suit the Gen2 boards available.
The R8A7779 platform code is modified to use "sata-r8a7779"
device id.
Signed-off-by: Valentine Barshak <valentine.barshak@xxxxxxxxxxxxxxxxxx>
---
.../devicetree/bindings/ata/sata_rcar.txt | 5 +-
arch/arm/mach-shmobile/clock-r8a7779.c | 2 +-
arch/arm/mach-shmobile/setup-r8a7779.c | 2 +-
drivers/ata/sata_rcar.c | 112 ++++++++++++++++++---
4 files changed, 102 insertions(+), 19 deletions(-)
diff --git a/Documentation/devicetree/bindings/ata/sata_rcar.txt b/Documentation/devicetree/bindings/ata/sata_rcar.txt
index 2465183..b5a41bf 100644
--- a/Documentation/devicetree/bindings/ata/sata_rcar.txt
+++ b/Documentation/devicetree/bindings/ata/sata_rcar.txt
@@ -1,7 +1,10 @@
* Renesas R-Car SATA
Required properties:
-- compatible : must be "renesas,sata-r8a7779"
+- compatible : must be one of the following:
s/must be/should contain/
+ - "renesas,sata-r8a7779" for R-Car H1
+ - "renesas,sata-r8a7790" for R-Car H2
+ - "renesas,sata-r8a7791" for R-Car M2
How do renesas,sata-r8a7790 and renesas,sata-r8a7791 differ?
- reg : address range of the SATA registers.
It's a size too...
- interrupt-parent : interrupt parent controller phandle
Not required.
[...]
+static struct of_device_id sata_rcar_match[] = {
+ {
+ .compatible = "renesas,sata-r8a7779",
+ .data = (void *)RCAR_GEN1_SATA,
+ },
+ {
+ .compatible = "renesas,sata-r8a7790",
+ .data = (void *)RCAR_GEN2_SATA
+ },
+ {
+ .compatible = "renesas,sata-r8a7791",
+ .data = (void *)RCAR_GEN2_SATA
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, sata_rcar_match);
Are the renesas,sata-r8a779x variants identical?
Yes.
If so, why the two strings?
Just thought the driver should support "renesas,sata-r8a7791"
compatibility as well since it should support both SoCs.
Didn't want to force sata-r8a7790 compatibility for the r8a7791 SoC DTS.
Could we not require sata-r8a7791 devices to have "sata-r8a7790" in the
compatible list:
compatible = "sata-r8a7791", "sata-r8a7790";
That way we can match on "sata-r8a7791" if we want to later, but don't
need code for it now.
We could. In this case having compatible = "renesas,sata-r8a7791" would
not be enough, though it looks like a valid compatible list to me.
Thanks,
Mark.
Thanks,
Val.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
