Re: [PATCH v8 1/6] mtd: nand: omap: combine different flavours of 1-bit hamming ecc schemes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Fri, Oct 11, 2013 at 07:06:38PM +0530, Pekon Gupta wrote:
> OMAP NAND driver currently supports multiple flavours of 1-bit Hamming
> ecc-scheme, like:
> - OMAP_ECC_HAMMING_CODE_DEFAULT
> 	1-bit hamming ecc code using software library
> - OMAP_ECC_HAMMING_CODE_HW
> 	1-bit hamming ecc-code using GPMC h/w engine
> - OMAP_ECC_HAMMING_CODE_HW_ROMCODE
> 	1-bit hamming ecc-code using GPMC h/w engin with ecc-layout compatible
> 	to ROM code.
> 
> This patch combines above multiple ecc-schemes into single implementation:
> - OMAP_ECC_HAM1_CODE_HW
> 	1-bit hamming ecc-code using GPMC h/w engine with ROM-code compatible
> 	ecc-layout.
> 
> Signed-off-by: Pekon Gupta <pekon@xxxxxx>

Reviewed-by: Felipe Balbi <balbi@xxxxxx>

> ---
>  Documentation/devicetree/bindings/mtd/gpmc-nand.txt | 8 ++++----
>  arch/arm/mach-omap2/board-flash.c                   | 2 +-
>  arch/arm/mach-omap2/gpmc.c                          | 4 +---
>  drivers/mtd/nand/omap2.c                            | 9 +++------
>  include/linux/platform_data/mtd-nand-omap2.h        | 6 +-----
>  5 files changed, 10 insertions(+), 19 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
> index df338cb..25ee232 100644
> --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
> +++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
> @@ -22,10 +22,10 @@ Optional properties:
>  				width of 8 is assumed.
>  
>   - ti,nand-ecc-opt:		A string setting the ECC layout to use. One of:
> -
> -		"sw"		Software method (default)
> -		"hw"		Hardware method
> -		"hw-romcode"	gpmc hamming mode method & romcode layout
> +		"sw"		<deprecated> use "ham1" instead
> +		"hw"		<deprecated> use "ham1" instead
> +		"hw-romcode"	<deprecated> use "ham1" instead
> +		"ham1"		1-bit Hamming ecc code
>  		"bch4"		4-bit BCH ecc code
>  		"bch8"		8-bit BCH ecc code
>  
> diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
> index fc20a61..ac82512 100644
> --- a/arch/arm/mach-omap2/board-flash.c
> +++ b/arch/arm/mach-omap2/board-flash.c
> @@ -142,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
>  	board_nand_data.nr_parts	= nr_parts;
>  	board_nand_data.devsize		= nand_type;
>  
> -	board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT;
> +	board_nand_data.ecc_opt = OMAP_ECC_BCH8_CODE_HW;
>  	gpmc_nand_init(&board_nand_data, gpmc_t);
>  }
>  #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
> diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
> index 579697a..c9fb353 100644
> --- a/arch/arm/mach-omap2/gpmc.c
> +++ b/arch/arm/mach-omap2/gpmc.c
> @@ -1342,9 +1342,7 @@ static void __maybe_unused gpmc_read_timings_dt(struct device_node *np,
>  #ifdef CONFIG_MTD_NAND
>  
>  static const char * const nand_ecc_opts[] = {
> -	[OMAP_ECC_HAMMING_CODE_DEFAULT]		= "sw",
> -	[OMAP_ECC_HAMMING_CODE_HW]		= "hw",
> -	[OMAP_ECC_HAMMING_CODE_HW_ROMCODE]	= "hw-romcode",
> +	[OMAP_ECC_HAM1_CODE_HW]			= "ham1",
>  	[OMAP_ECC_BCH4_CODE_HW]			= "bch4",
>  	[OMAP_ECC_BCH8_CODE_HW]			= "bch8",
>  };
> diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
> index 4ecf0e5..8d521aa 100644
> --- a/drivers/mtd/nand/omap2.c
> +++ b/drivers/mtd/nand/omap2.c
> @@ -1993,10 +1993,7 @@ static int omap_nand_probe(struct platform_device *pdev)
>  	}
>  
>  	/* select the ecc type */
> -	if (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_DEFAULT)
> -		info->nand.ecc.mode = NAND_ECC_SOFT;
> -	else if ((pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW) ||
> -		(pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW_ROMCODE)) {
> +	if (pdata->ecc_opt == OMAP_ECC_HAM1_CODE_HW) {
>  		info->nand.ecc.bytes            = 3;
>  		info->nand.ecc.size             = 512;
>  		info->nand.ecc.strength         = 1;
> @@ -2025,7 +2022,7 @@ static int omap_nand_probe(struct platform_device *pdev)
>  	}
>  
>  	/* rom code layout */
> -	if (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW_ROMCODE) {
> +	if (pdata->ecc_opt == OMAP_ECC_HAM1_CODE_HW) {
>  
>  		if (info->nand.options & NAND_BUSWIDTH_16)
>  			offset = 2;
> @@ -2033,7 +2030,7 @@ static int omap_nand_probe(struct platform_device *pdev)
>  			offset = 1;
>  			info->nand.badblock_pattern = &bb_descrip_flashbased;
>  		}
> -		omap_oobinfo.eccbytes = 3 * (info->mtd.oobsize/16);
> +		omap_oobinfo.eccbytes = 3 * (info->mtd.writesize / 512);
>  		for (i = 0; i < omap_oobinfo.eccbytes; i++)
>  			omap_oobinfo.eccpos[i] = i+offset;
>  
> diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h
> index 6bf9ef4..cb5a54a 100644
> --- a/include/linux/platform_data/mtd-nand-omap2.h
> +++ b/include/linux/platform_data/mtd-nand-omap2.h
> @@ -23,11 +23,7 @@ enum nand_io {
>  };
>  
>  enum omap_ecc {
> -		/* 1-bit ecc: stored at end of spare area */
> -	OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */
> -	OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
> -		/* 1-bit ecc: stored at beginning of spare area as romcode */
> -	OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
> +	OMAP_ECC_HAM1_CODE_HW = 0, /* 1-bit Hamming ecc code */
>  	OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */
>  	OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */
>  };
> -- 
> 1.8.1
> 

-- 
balbi

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux