On 10/10/2013 11:47 AM, Tony Lindgren wrote: > * Nishanth Menon <nm@xxxxxx> [131010 09:53]: >> Do not reset GPIO1 at boot-up because GPIO 7 in GPIO1 block is used on >> OMAP4460 PandaBoard-ES to select voltage register in TPS62361 which >> supplies VDD_MPU. >> >> Without this, OMAP4460 PandaBoard-ES boards fail to boot-up because >> MPU voltage switches over to VSET0 voltage value (boot voltage) which >> is not sufficient to operate the device at OPP100. > > Is this needs as a fix for the -rc series? Nope, this is not a regression recently introduced, has been in since day one of Panda-ES support. Further, we still have decision pending on the dependent series from Rajendra[1] - will be good to see it go in along with AM335x-EVM. [1] http://marc.info/?t=138131368300005&r=1&w=2 -- Regards, Nishanth Menon -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
