Re: [PATCH 2/5] usb: gadget: s3c-hsotg: support configurable UTMI PHY width

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 10/10/2013 11:29 AM, Felipe Balbi wrote:
On Mon, Oct 07, 2013 at 06:12:29AM -0400, Matt Porter wrote:
Extend dwc2 binding with an optional utmi phy width property.
Enable the s3c-hsotg.c driver to use standard dwc2 binding
and enable configuration of the UTMI phy width based on the
property.

Signed-off-by: Matt Porter <matt.porter@xxxxxxxxxx>
Reviewed-by: Markus Mayer <markus.mayer@xxxxxxxxxx>
Reviewed-by: Tim Kryger <tim.kryger@xxxxxxxxxx>
---
  Documentation/devicetree/bindings/staging/dwc2.txt |  4 ++++
  drivers/usb/gadget/s3c-hsotg.c                     | 18 +++++++++++++++++-
  drivers/usb/gadget/s3c-hsotg.h                     |  1 +
  3 files changed, 22 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/staging/dwc2.txt b/Documentation/devicetree/bindings/staging/dwc2.txt
index 1a1b7cf..fb6b8ee 100644
--- a/Documentation/devicetree/bindings/staging/dwc2.txt
+++ b/Documentation/devicetree/bindings/staging/dwc2.txt
@@ -6,10 +6,14 @@ Required properties:
  - reg : Should contain 1 register range (address and length)
  - interrupts : Should contain 1 interrupt

+Optional properties:
+- snps,phy-utmi-width: Must contain the UTMI data width (either 8 or 16)

isn't this available in any of the configuration registers ?

Yes and no. HWCFG4 has a UTMI data width field. However, it has 3 valid states, "8", "16", or "8 or 16". The BCM281xx implementation is set to the latter and the attached phy is 8-bit.

Looking at dwc2 prior to Matthijs Kooijman's patch [1] which starts validating the value of phy_utmi_width in that driver, the pci.c dwc2_module_params .phy_utmi_width field there even had the comment, "/* 16 bits - NOT DETECTABLE */". The autodetect code in dwc2_set_param_phy_utmi_width() will fail if HWCFG4 has the "8 or 16" option as it just decides to default to a phy width of 16 if nothing is configured by the platform glue. This property would also allow this issue to be addressed in that driver.

  Example:

          usb@101c0000 {
                  compatible = "ralink,rt3050-usb, snps,dwc2";
                  reg = <0x101c0000 40000>;
                  interrupts = <18>;
+		snps,phy-utmi-width = <8>;

indentation.

will fix.

-Matt

[1] de4a193 staging: dwc2: validate the value for phy_utmi_width

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux