On Thu, Oct 10, 2013 at 09:39:04AM +0000, Lu Jingchang-B35083 wrote: > Hi, Vinod, > > Could you please help review this patch? Could it be merged into your next tree? > Thanks! Where is the patch 1 & 2 of the series, I dont sem to find it. Also I need ACK from one of the DT maintainers on the binding before I can carry this -- ~Vinod > > > Best Regards, > Jingchang > > > > -----Original Message----- > > From: Lu Jingchang-B35083 > > Sent: Wednesday, September 18, 2013 5:58 PM > > To: vinod.koul@xxxxxxxxx > > Cc: shawn.guo@xxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; linux-arm- > > kernel@xxxxxxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; Lu Jingchang- > > B35083; Wang Huan-B18965 > > Subject: [PATCH v6 3/3] dma: Add Freescale eDMA engine driver support > > > > Add Freescale enhanced direct memory(eDMA) controller support. > > The eDMA controller deploys DMAMUXs routing DMA request sources(slot) > > to eDMA channels. > > This module can be found on Vybrid and LS-1 SoCs. > > > > Signed-off-by: Alison Wang <b18965@xxxxxxxxxxxxx> > > Signed-off-by: Jingchang Lu <b35083@xxxxxxxxxxxxx> > > --- > > changes in v6: > > holding lock in dma_control to prevent race. > > > > changes in v5: > > config slave_id when dmaengine_slave_config intead of channel request. > > adding residue calculation and dma pause/resume device control. > > > > changes in v4: > > using exact compatible string in binding document. > > > > changes in v3: > > handle all pending interrupt one time. > > add protect lock on dma transfer complete handling. > > change desc and tcd alloc flag to GFP_NOWAIT. > > add sanity check and error messages. > > > > changes in v2: > > using generic dma-channels property instead of fsl,dma-channel. > > rename the binding document to fsl-edma.txt. > > > > > > Documentation/devicetree/bindings/dma/fsl-edma.txt | 84 ++ > > drivers/dma/Kconfig | 10 + > > drivers/dma/Makefile | 1 + > > drivers/dma/fsl-edma.c | 944 > > +++++++++++++++++++++ > > 4 files changed, 1039 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/dma/fsl-edma.txt > > create mode 100644 drivers/dma/fsl-edma.c > -- -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html