Re: [PATCH v4 3/4] ARM: STi: Supply I2C configuration to STiH415 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 10/10/2013 02:33 PM, Stephen GALLIMORE wrote:
>> -----Original Message-----
>> From: Maxime COQUELIN [mailto:maxime.coquelin@xxxxxx]
>> Sent: 08 October 2013 17:43
>> .....
>> +
>> +		i2c@fed40000 {
>> +			compatible	= "st,comms-ssc-i2c";
>> +			reg		= <0xfed40000 0x110>;
>> +			interrupts	=  <GIC_SPI 187 IRQ_TYPE_EDGE_RISING>;
> This should specify level (high) triggered, not edge triggered, for our
> SoC integrations.
>
> Note that level triggered is the default GIC setup and was therefore
> what was being used when you specified "0" for the flags previously.
Thanks Stephen.
As discussed this morning, I agree this should be high level triggered.

This will be fixed in next revision.

>
>> +			clocks		= <&CLKS_ICN_REG_0>;
>> +			clock-names	= "ssc";
>> +			clock-frequency = <400000>;
>> +			pinctrl-names	= "default";
>> +			pinctrl-0	= <&pinctrl_i2c0_default>;
>> +
>> +			status		= "disabled";
>> +		};
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux