Re: [PATCH 1/2] i2c designware make SCL and SDA falling time configurable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, Oct 08, 2013 at 05:00:54PM +0200, Romain Baeriswyl wrote:
>  static void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable)
> @@ -286,6 +287,7 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
>  	u32 input_clock_khz;
>  	u32 hcnt, lcnt;
>  	u32 reg;
> +	u32 sda_falling_time, scl_falling_time;
>  
>  	input_clock_khz = dev->get_clk_rate_khz(dev);
>  
> @@ -307,15 +309,25 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
>  
>  	/* set standard and fast speed deviders for high/low periods */
>  
> +	if (dev->sda_falling_time)
> +		sda_falling_time = dev->sda_falling_time;
> +	else
> +		sda_falling_time = 300; /* ns */

I think this looks better:

	sda_falling_time = dev->sda_falling_time ? dev->sda_falling_time : 300;

> +
> +	if (dev->scl_falling_time)
> +		scl_falling_time = dev->scl_falling_time;
> +	else
> +		scl_falling_time = 300; /* ns */

Ditto.

> +
>  	/* Standard-mode */
>  	hcnt = i2c_dw_scl_hcnt(input_clock_khz,
> -				40,	/* tHD;STA = tHIGH = 4.0 us */
> -				3,	/* tf = 0.3 us */
> +				4000,	/* tHD;STA = tHIGH = 4.0 us */
> +				sda_falling_time,
>  				0,	/* 0: DW default, 1: Ideal */
>  				0);	/* No offset */
>  	lcnt = i2c_dw_scl_lcnt(input_clock_khz,
> -				47,	/* tLOW = 4.7 us */
> -				3,	/* tf = 0.3 us */
> +				4700,	/* tLOW = 4.7 us */
> +				scl_falling_time,
>  				0);	/* No offset */
>  
>  	/* Allow platforms to specify the ideal HCNT and LCNT values */
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux