From: Tang Yuantian <yuantian.tang@xxxxxxxxxxxxx> The following SoCs will be affected: p2041, p3041, p4080, p5020, p5040, b4420, b4860, t4240 Signed-off-by: Tang Yuantian <Yuantian.Tang@xxxxxxxxxxxxx> Signed-off-by: Li Yang <leoli@xxxxxxxxxxxxx> --- v5: - refine the binding document - update the compatible string v4: - add binding document - update compatible string - update the reg property v3: - fix typo v2: - add t4240, b4420, b4860 support - remove pll/4 clock from p2041, p3041 and p5020 board .../devicetree/bindings/clock/corenet-clock.txt | 111 ++++++++++++++++++++ arch/powerpc/boot/dts/fsl/b4420si-post.dtsi | 35 +++++++ arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi | 2 + arch/powerpc/boot/dts/fsl/b4860si-post.dtsi | 35 +++++++ arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi | 4 + arch/powerpc/boot/dts/fsl/p2041si-post.dtsi | 60 +++++++++++ arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi | 4 + arch/powerpc/boot/dts/fsl/p3041si-post.dtsi | 60 +++++++++++ arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi | 4 + arch/powerpc/boot/dts/fsl/p4080si-post.dtsi | 112 +++++++++++++++++++++ arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi | 8 ++ arch/powerpc/boot/dts/fsl/p5020si-post.dtsi | 42 ++++++++ arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi | 2 + arch/powerpc/boot/dts/fsl/p5040si-post.dtsi | 60 +++++++++++ arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi | 4 + arch/powerpc/boot/dts/fsl/t4240si-post.dtsi | 85 ++++++++++++++++ arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi | 12 +++ 17 files changed, 640 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/corenet-clock.txt diff --git a/Documentation/devicetree/bindings/clock/corenet-clock.txt b/Documentation/devicetree/bindings/clock/corenet-clock.txt new file mode 100644 index 0000000..8efc62d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/corenet-clock.txt @@ -0,0 +1,111 @@ +* Clock Block on Freescale CoreNet Platforms + +Freescale CoreNet chips take primary clocking input from the external +SYSCLK signal. The SYSCLK input (frequency) is multiplied using +multiple phase locked loops (PLL) to create a variety of frequencies +which can then be passed to a variety of internal logic, including +cores and peripheral IP blocks. +Please refer to the Reference Manual for details. + +1. Clock Block Binding + +Required properties: +- compatible: Should include one or more of the following: + - "fsl,<chip>-clockgen": for chip specific clock block + - "fsl,qoriq-clockgen-[1,2].x": for chassis 1.x and 2.x clock +- reg: Offset and length of the clock register set +- clock-frequency: Indicates input clock frequency of clock block. + Will be set by u-boot + +Recommended properties: +- #ddress-cells: Specifies the number of cells used to represent + physical base addresses. Must be present if the device has + sub-nodes and set to 1 if present +- #size-cells: Specifies the number of cells used to represent + the size of an address. Must be present if the device has + sub-nodes and set to 1 if present + +2. Clock Provider/Consumer Binding + +Most of the binding are from the common clock binding[1]. + [1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : Should include one or more of the following: + - "fsl,qoriq-core-pll-[1,2].x": Indicates a core PLL clock device + - "fsl,qoriq-core-mux-[1,2].x": Indicates a core multiplexer clock + device; divided from the core PLL clock + - "fixed-clock": From common clock binding; indicates output clock + of oscillator + - "fsl,qoriq-sysclk-[1,2].x": Indicates input system clock +- #clock-cells: From common clock binding; indicates the number of + output clock. 0 is for one output clock; 1 for more than one clock + +Recommended properties: +- clocks: Should be the phandle of input parent clock +- clock-names: From common clock binding, indicates the clock name +- clock-output-names: From common clock binding, indicates the names of + output clocks +- reg: Should be the offset and length of clock block base address. + The length should be 4. + +Example for clock block and clock provider: +/ { + clockgen: global-utilities@e1000 { + compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0"; + reg = <0xe1000 0x1000>; + clock-frequency = <0>; + #address-cells = <1>; + #size-cells = <1>; + + sysclk: sysclk { + #clock-cells = <0>; + compatible = "fsl,qoriq-sysclk-1.0", "fixed-clock"; + clock-output-names = "sysclk"; + } + + pll0: pll0@800 { + #clock-cells = <1>; + reg = <0x800 0x4>; + compatible = "fsl,qoriq-core-pll-1.0"; + clocks = <&sysclk>; + clock-output-names = "pll0", "pll0-div2"; + }; + + pll1: pll1@820 { + #clock-cells = <1>; + reg = <0x820 0x4>; + compatible = "fsl,qoriq-core-pll-1.0"; + clocks = <&sysclk>; + clock-output-names = "pll1", "pll1-div2"; + }; + + mux0: mux0@0 { + #clock-cells = <0>; + reg = <0x0 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux0"; + }; + + mux1: mux1@20 { + #clock-cells = <0>; + reg = <0x20 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux1"; + }; + }; + } + +Example for clock consumer: + +/ { + cpu0: PowerPC,e5500@0 { + ... + clocks = <&mux0>; + ... + }; + } diff --git a/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi index 5a6615d..e910e82 100644 --- a/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi @@ -86,6 +86,41 @@ clockgen: global-utilities@e1000 { compatible = "fsl,b4420-clockgen", "fsl,qoriq-clockgen-2.0"; + #address-cells = <1>; + #size-cells = <1>; + + sysclk: sysclk { + #clock-cells = <0>; + compatible = "fsl,qoriq-sysclk-2.0", "fixed-clock"; + clock-output-names = "sysclk"; + } + + pll0: pll0@800 { + #clock-cells = <1>; + reg = <0x800 0x4>; + compatible = "fsl,qoriq-core-pll-2.0"; + clocks = <&sysclk>; + clock-output-names = "pll0", "pll0-div2", "pll0-div4"; + }; + + pll1: pll1@820 { + #clock-cells = <1>; + reg = <0x820 0x4>; + compatible = "fsl,qoriq-core-pll-2.0"; + clocks = <&sysclk>; + clock-output-names = "pll1", "pll1-div2", "pll1-div4"; + }; + + mux0: mux0@0 { + #clock-cells = <0>; + reg = <0x0 0x4>; + compatible = "fsl,qoriq-core-mux-2.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, + <&pll1 0>, <&pll1 1>, <&pll1 2>; + clock-names = "pll0_0", "pll0_1", "pll0_2", + "pll1_0", "pll1_1", "pll1_2"; + clock-output-names = "cmux0"; + }; }; rcpm: global-utilities@e2000 { diff --git a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi index 7b4426e..a11126b 100644 --- a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi @@ -62,11 +62,13 @@ cpu0: PowerPC,e6500@0 { device_type = "cpu"; reg = <0 1>; + clocks = <&mux0>; next-level-cache = <&L2>; }; cpu1: PowerPC,e6500@2 { device_type = "cpu"; reg = <2 3>; + clocks = <&mux0>; next-level-cache = <&L2>; }; }; diff --git a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi index e5cf6c8..5cfcfe4 100644 --- a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi @@ -130,6 +130,41 @@ clockgen: global-utilities@e1000 { compatible = "fsl,b4860-clockgen", "fsl,qoriq-clockgen-2.0"; + #address-cells = <1>; + #size-cells = <1>; + + sysclk: sysclk { + #clock-cells = <0>; + compatible = "fsl,qoriq-sysclk-2.0", "fixed-clock"; + clock-output-names = "sysclk"; + } + + pll0: pll0@800 { + #clock-cells = <1>; + reg = <0x800 0x4>; + compatible = "fsl,qoriq-core-pll-2.0"; + clocks = <&sysclk>; + clock-output-names = "pll0", "pll0-div2", "pll0-div4"; + }; + + pll1: pll1@820 { + #clock-cells = <1>; + reg = <0x820 0x4>; + compatible = "fsl,qoriq-core-pll-2.0"; + clocks = <&sysclk>; + clock-output-names = "pll1", "pll1-div2", "pll1-div4"; + }; + + mux0: mux0@0 { + #clock-cells = <0>; + reg = <0x0 0x4>; + compatible = "fsl,qoriq-core-mux-2.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, + <&pll1 0>, <&pll1 1>, <&pll1 2>; + clock-names = "pll0_0", "pll0_1", "pll0_2", + "pll1_0", "pll1_1", "pll1_2"; + clock-output-names = "cmux0"; + }; }; rcpm: global-utilities@e2000 { diff --git a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi index 5263fa4..185a231 100644 --- a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi @@ -62,21 +62,25 @@ cpu0: PowerPC,e6500@0 { device_type = "cpu"; reg = <0 1>; + clocks = <&mux0>; next-level-cache = <&L2>; }; cpu1: PowerPC,e6500@2 { device_type = "cpu"; reg = <2 3>; + clocks = <&mux0>; next-level-cache = <&L2>; }; cpu2: PowerPC,e6500@4 { device_type = "cpu"; reg = <4 5>; + clocks = <&mux0>; next-level-cache = <&L2>; }; cpu3: PowerPC,e6500@6 { device_type = "cpu"; reg = <6 7>; + clocks = <&mux0>; next-level-cache = <&L2>; }; }; diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi index dc6cc5a..f3f7f65 100644 --- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi @@ -308,6 +308,66 @@ compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0"; reg = <0xe1000 0x1000>; clock-frequency = <0>; + #address-cells = <1>; + #size-cells = <1>; + + sysclk: sysclk { + #clock-cells = <0>; + compatible = "fsl,qoriq-sysclk-1.0", "fixed-clock"; + clock-output-names = "sysclk"; + } + + pll0: pll0@800 { + #clock-cells = <1>; + reg = <0x800 0x4>; + compatible = "fsl,qoriq-core-pll-1.0"; + clocks = <&sysclk>; + clock-output-names = "pll0", "pll0-div2"; + }; + + pll1: pll1@820 { + #clock-cells = <1>; + reg = <0x820 0x4>; + compatible = "fsl,qoriq-core-pll-1.0"; + clocks = <&sysclk>; + clock-output-names = "pll1", "pll1-div2"; + }; + + mux0: mux0@0 { + #clock-cells = <0>; + reg = <0x0 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux0"; + }; + + mux1: mux1@20 { + #clock-cells = <0>; + reg = <0x20 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux1"; + }; + + mux2: mux2@40 { + #clock-cells = <0>; + reg = <0x40 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux2"; + }; + + mux3: mux3@60 { + #clock-cells = <0>; + reg = <0x60 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux3"; + }; }; rcpm: global-utilities@e2000 { diff --git a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi index 7a2697d..22f3b14 100644 --- a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi @@ -81,6 +81,7 @@ cpu0: PowerPC,e500mc@0 { device_type = "cpu"; reg = <0>; + clocks = <&mux0>; next-level-cache = <&L2_0>; L2_0: l2-cache { next-level-cache = <&cpc>; @@ -89,6 +90,7 @@ cpu1: PowerPC,e500mc@1 { device_type = "cpu"; reg = <1>; + clocks = <&mux1>; next-level-cache = <&L2_1>; L2_1: l2-cache { next-level-cache = <&cpc>; @@ -97,6 +99,7 @@ cpu2: PowerPC,e500mc@2 { device_type = "cpu"; reg = <2>; + clocks = <&mux2>; next-level-cache = <&L2_2>; L2_2: l2-cache { next-level-cache = <&cpc>; @@ -105,6 +108,7 @@ cpu3: PowerPC,e500mc@3 { device_type = "cpu"; reg = <3>; + clocks = <&mux3>; next-level-cache = <&L2_3>; L2_3: l2-cache { next-level-cache = <&cpc>; diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi index 3fa1e22..9bab9c9 100644 --- a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi @@ -335,6 +335,66 @@ compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0"; reg = <0xe1000 0x1000>; clock-frequency = <0>; + #address-cells = <1>; + #size-cells = <1>; + + sysclk: sysclk { + #clock-cells = <0>; + compatible = "fsl,qoriq-sysclk-1.0", "fixed-clock"; + clock-output-names = "sysclk"; + } + + pll0: pll0@800 { + #clock-cells = <1>; + reg = <0x800 0x4>; + compatible = "fsl,qoriq-core-pll-1.0"; + clocks = <&sysclk>; + clock-output-names = "pll0", "pll0-div2"; + }; + + pll1: pll1@820 { + #clock-cells = <1>; + reg = <0x820 0x4>; + compatible = "fsl,qoriq-core-pll-1.0"; + clocks = <&sysclk>; + clock-output-names = "pll1", "pll1-div2"; + }; + + mux0: mux0@0 { + #clock-cells = <0>; + reg = <0x0 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux0"; + }; + + mux1: mux1@20 { + #clock-cells = <0>; + reg = <0x20 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux1"; + }; + + mux2: mux2@40 { + #clock-cells = <0>; + reg = <0x40 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux2"; + }; + + mux3: mux3@60 { + #clock-cells = <0>; + reg = <0x60 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux3"; + }; }; rcpm: global-utilities@e2000 { diff --git a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi index c9ca2c3..468e8be 100644 --- a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi @@ -82,6 +82,7 @@ cpu0: PowerPC,e500mc@0 { device_type = "cpu"; reg = <0>; + clocks = <&mux0>; next-level-cache = <&L2_0>; L2_0: l2-cache { next-level-cache = <&cpc>; @@ -90,6 +91,7 @@ cpu1: PowerPC,e500mc@1 { device_type = "cpu"; reg = <1>; + clocks = <&mux1>; next-level-cache = <&L2_1>; L2_1: l2-cache { next-level-cache = <&cpc>; @@ -98,6 +100,7 @@ cpu2: PowerPC,e500mc@2 { device_type = "cpu"; reg = <2>; + clocks = <&mux2>; next-level-cache = <&L2_2>; L2_2: l2-cache { next-level-cache = <&cpc>; @@ -106,6 +109,7 @@ cpu3: PowerPC,e500mc@3 { device_type = "cpu"; reg = <3>; + clocks = <&mux3>; next-level-cache = <&L2_3>; L2_3: l2-cache { next-level-cache = <&cpc>; diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi index 34769a7..2108269 100644 --- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi @@ -355,6 +355,118 @@ compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0"; reg = <0xe1000 0x1000>; clock-frequency = <0>; + #address-cells = <1>; + #size-cells = <1>; + + sysclk: sysclk { + #clock-cells = <0>; + compatible = "fsl,qoriq-sysclk-1.0", "fixed-clock"; + clock-output-names = "sysclk"; + } + + pll0: pll0@800 { + #clock-cells = <1>; + reg = <0x800 0x4>; + compatible = "fsl,qoriq-core-pll-1.0"; + clocks = <&sysclk>; + clock-output-names = "pll0", "pll0-div2"; + }; + + pll1: pll1@820 { + #clock-cells = <1>; + reg = <0x820 0x4>; + compatible = "fsl,qoriq-core-pll-1.0"; + clocks = <&sysclk>; + clock-output-names = "pll1", "pll1-div2"; + }; + + pll2: pll2@840 { + #clock-cells = <1>; + reg = <0x840 0x4>; + compatible = "fsl,qoriq-core-pll-1.0"; + clocks = <&sysclk>; + clock-output-names = "pll2", "pll2-div2"; + }; + + pll3: pll3@860 { + #clock-cells = <1>; + reg = <0x860 0x4>; + compatible = "fsl,qoriq-core-pll-1.0"; + clocks = <&sysclk>; + clock-output-names = "pll3", "pll3-div2"; + }; + + mux0: mux0@0 { + #clock-cells = <0>; + reg = <0x0 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux0"; + }; + + mux1: mux1@20 { + #clock-cells = <0>; + reg = <0x20 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux1"; + }; + + mux2: mux2@40 { + #clock-cells = <0>; + reg = <0x40 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux2"; + }; + + mux3: mux3@60 { + #clock-cells = <0>; + reg = <0x60 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux3"; + }; + + mux4: mux4@80 { + #clock-cells = <0>; + reg = <0x80 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>; + clock-names = "pll2_0", "pll2_1", "pll3_0", "pll3_1"; + clock-output-names = "cmux4"; + }; + + mux5: mux5@a0 { + #clock-cells = <0>; + reg = <0xa0 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>; + clock-names = "pll2_0", "pll2_1", "pll3_0", "pll3_1"; + clock-output-names = "cmux5"; + }; + + mux6: mux6@c0 { + #clock-cells = <0>; + reg = <0xc0 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>; + clock-names = "pll2_0", "pll2_1", "pll3_0", "pll3_1"; + clock-output-names = "cmux6"; + }; + + mux7: mux7@e0 { + #clock-cells = <0>; + reg = <0xe0 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>; + clock-names = "pll2_0", "pll2_1", "pll3_0", "pll3_1"; + clock-output-names = "cmux7"; + }; }; rcpm: global-utilities@e2000 { diff --git a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi index 493d9a0..0040b5a 100644 --- a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi @@ -81,6 +81,7 @@ cpu0: PowerPC,e500mc@0 { device_type = "cpu"; reg = <0>; + clocks = <&mux0>; next-level-cache = <&L2_0>; L2_0: l2-cache { next-level-cache = <&cpc>; @@ -89,6 +90,7 @@ cpu1: PowerPC,e500mc@1 { device_type = "cpu"; reg = <1>; + clocks = <&mux1>; next-level-cache = <&L2_1>; L2_1: l2-cache { next-level-cache = <&cpc>; @@ -97,6 +99,7 @@ cpu2: PowerPC,e500mc@2 { device_type = "cpu"; reg = <2>; + clocks = <&mux2>; next-level-cache = <&L2_2>; L2_2: l2-cache { next-level-cache = <&cpc>; @@ -105,6 +108,7 @@ cpu3: PowerPC,e500mc@3 { device_type = "cpu"; reg = <3>; + clocks = <&mux3>; next-level-cache = <&L2_3>; L2_3: l2-cache { next-level-cache = <&cpc>; @@ -113,6 +117,7 @@ cpu4: PowerPC,e500mc@4 { device_type = "cpu"; reg = <4>; + clocks = <&mux4>; next-level-cache = <&L2_4>; L2_4: l2-cache { next-level-cache = <&cpc>; @@ -121,6 +126,7 @@ cpu5: PowerPC,e500mc@5 { device_type = "cpu"; reg = <5>; + clocks = <&mux5>; next-level-cache = <&L2_5>; L2_5: l2-cache { next-level-cache = <&cpc>; @@ -129,6 +135,7 @@ cpu6: PowerPC,e500mc@6 { device_type = "cpu"; reg = <6>; + clocks = <&mux6>; next-level-cache = <&L2_6>; L2_6: l2-cache { next-level-cache = <&cpc>; @@ -137,6 +144,7 @@ cpu7: PowerPC,e500mc@7 { device_type = "cpu"; reg = <7>; + clocks = <&mux7>; next-level-cache = <&L2_7>; L2_7: l2-cache { next-level-cache = <&cpc>; diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi index bc3ae5a..e09f8cd 100644 --- a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi @@ -340,6 +340,48 @@ compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0"; reg = <0xe1000 0x1000>; clock-frequency = <0>; + #address-cells = <1>; + #size-cells = <1>; + + sysclk: sysclk { + #clock-cells = <0>; + compatible = "fsl,qoriq-sysclk-1.0", "fixed-clock"; + clock-output-names = "sysclk"; + } + + pll0: pll0@800 { + #clock-cells = <1>; + reg = <0x800 0x4>; + compatible = "fsl,qoriq-core-pll-1.0"; + clocks = <&sysclk>; + clock-output-names = "pll0", "pll0-div2"; + }; + + pll1: pll1@820 { + #clock-cells = <1>; + reg = <0x820 0x4>; + compatible = "fsl,qoriq-core-pll-1.0"; + clocks = <&sysclk>; + clock-output-names = "pll1", "pll1-div2"; + }; + + mux0: mux0@0 { + #clock-cells = <0>; + reg = <0x0 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux0"; + }; + + mux1: mux1@20 { + #clock-cells = <0>; + reg = <0x20 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux1"; + }; }; rcpm: global-utilities@e2000 { diff --git a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi index 8df47fc..fe1a2e6 100644 --- a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi @@ -88,6 +88,7 @@ cpu0: PowerPC,e5500@0 { device_type = "cpu"; reg = <0>; + clocks = <&mux0>; next-level-cache = <&L2_0>; L2_0: l2-cache { next-level-cache = <&cpc>; @@ -96,6 +97,7 @@ cpu1: PowerPC,e5500@1 { device_type = "cpu"; reg = <1>; + clocks = <&mux1>; next-level-cache = <&L2_1>; L2_1: l2-cache { next-level-cache = <&cpc>; diff --git a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi index a91897f..109f132 100644 --- a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi @@ -300,6 +300,66 @@ compatible = "fsl,p5040-clockgen", "fsl,qoriq-clockgen-1.0"; reg = <0xe1000 0x1000>; clock-frequency = <0>; + #address-cells = <1>; + #size-cells = <1>; + + sysclk: sysclk { + #clock-cells = <0>; + compatible = "fsl,qoriq-sysclk-1.0", "fixed-clock"; + clock-output-names = "sysclk"; + } + + pll0: pll0@800 { + #clock-cells = <1>; + reg = <0x800 0x4>; + compatible = "fsl,qoriq-core-pll-1.0"; + clocks = <&sysclk>; + clock-output-names = "pll0", "pll0-div2"; + }; + + pll1: pll1@820 { + #clock-cells = <1>; + reg = <0x820 0x4>; + compatible = "fsl,qoriq-core-pll-1.0"; + clocks = <&sysclk>; + clock-output-names = "pll1", "pll1-div2"; + }; + + mux0: mux0@0 { + #clock-cells = <0>; + reg = <0x0 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux0"; + }; + + mux1: mux1@20 { + #clock-cells = <0>; + reg = <0x20 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux1"; + }; + + mux2: mux2@40 { + #clock-cells = <0>; + reg = <0x40 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux2"; + }; + + mux3: mux3@60 { + #clock-cells = <0>; + reg = <0x60 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux3"; + }; }; rcpm: global-utilities@e2000 { diff --git a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi index 40ca943..3674686 100644 --- a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi @@ -81,6 +81,7 @@ cpu0: PowerPC,e5500@0 { device_type = "cpu"; reg = <0>; + clocks = <&mux0>; next-level-cache = <&L2_0>; L2_0: l2-cache { next-level-cache = <&cpc>; @@ -89,6 +90,7 @@ cpu1: PowerPC,e5500@1 { device_type = "cpu"; reg = <1>; + clocks = <&mux1>; next-level-cache = <&L2_1>; L2_1: l2-cache { next-level-cache = <&cpc>; @@ -97,6 +99,7 @@ cpu2: PowerPC,e5500@2 { device_type = "cpu"; reg = <2>; + clocks = <&mux2>; next-level-cache = <&L2_2>; L2_2: l2-cache { next-level-cache = <&cpc>; @@ -105,6 +108,7 @@ cpu3: PowerPC,e5500@3 { device_type = "cpu"; reg = <3>; + clocks = <&mux3>; next-level-cache = <&L2_3>; L2_3: l2-cache { next-level-cache = <&cpc>; diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi index 510afa3..d45434f 100644 --- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi @@ -370,6 +370,91 @@ clockgen: global-utilities@e1000 { compatible = "fsl,t4240-clockgen", "fsl,qoriq-clockgen-2.0"; reg = <0xe1000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + sysclk: sysclk { + #clock-cells = <0>; + compatible = "fsl,qoriq-sysclk-2.0", "fixed-clock"; + clock-output-names = "sysclk"; + } + + pll0: pll0@800 { + #clock-cells = <1>; + reg = <0x800 0x4>; + compatible = "fsl,qoriq-core-pll-2.0"; + clocks = <&sysclk>; + clock-output-names = "pll0", "pll0-div2", "pll0-div4"; + }; + + pll1: pll1@820 { + #clock-cells = <1>; + reg = <0x820 0x4>; + compatible = "fsl,qoriq-core-pll-2.0"; + clocks = <&sysclk>; + clock-output-names = "pll1", "pll1-div2", "pll1-div4"; + }; + + pll2: pll2@840 { + #clock-cells = <1>; + reg = <0x840 0x4>; + compatible = "fsl,qoriq-core-pll-2.0"; + clocks = <&sysclk>; + clock-output-names = "pll2", "pll2-div2", "pll2-div4"; + }; + + pll3: pll3@860 { + #clock-cells = <1>; + reg = <0x860 0x4>; + compatible = "fsl,qoriq-core-pll-2.0"; + clocks = <&sysclk>; + clock-output-names = "pll3", "pll3-div2", "pll3-div4"; + }; + + pll4: pll4@880 { + #clock-cells = <1>; + reg = <0x880 0x4>; + compatible = "fsl,qoriq-core-pll-2.0"; + clocks = <&sysclk>; + clock-output-names = "pll4", "pll4-div2", "pll4-div4"; + }; + + mux0: mux0@0 { + #clock-cells = <0>; + reg = <0x0 0x4>; + compatible = "fsl,qoriq-core-mux-2.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, + <&pll1 0>, <&pll1 1>, <&pll1 2>, + <&pll2 0>, <&pll2 1>, <&pll2 2>; + clock-names = "pll0_0", "pll0_1", "pll0_2", + "pll1_0", "pll1_1", "pll1_2", + "pll2_0", "pll2_1", "pll2_2"; + clock-output-names = "cmux0"; + }; + + mux1: mux1@20 { + #clock-cells = <0>; + reg = <0x20 0x4>; + compatible = "fsl,qoriq-core-mux-2.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, + <&pll1 0>, <&pll1 1>, <&pll1 2>, + <&pll2 0>, <&pll2 1>, <&pll2 2>; + clock-names = "pll0_0", "pll0_1", "pll0_2", + "pll1_0", "pll1_1", "pll1_2", + "pll2_0", "pll2_1", "pll2_2"; + clock-output-names = "cmux1"; + }; + + mux2: mux2@40 { + #clock-cells = <0>; + reg = <0x40 0x4>; + compatible = "fsl,qoriq-core-mux-2.0"; + clocks = <&pll3 0>, <&pll3 1>, <&pll3 2>, + <&pll4 0>, <&pll4 1>, <&pll4 2>; + clock-names = "pll3_0", "pll3_1", "pll3_2", + "pll4_0", "pll4_1", "pll4_2"; + clock-output-names = "cmux2"; + }; }; rcpm: global-utilities@e2000 { diff --git a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi index a93c55a..0b8ccc5 100644 --- a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi @@ -67,61 +67,73 @@ cpu0: PowerPC,e6500@0 { device_type = "cpu"; reg = <0 1>; + clocks = <&mux0>; next-level-cache = <&L2_1>; }; cpu1: PowerPC,e6500@2 { device_type = "cpu"; reg = <2 3>; + clocks = <&mux0>; next-level-cache = <&L2_1>; }; cpu2: PowerPC,e6500@4 { device_type = "cpu"; reg = <4 5>; + clocks = <&mux0>; next-level-cache = <&L2_1>; }; cpu3: PowerPC,e6500@6 { device_type = "cpu"; reg = <6 7>; + clocks = <&mux0>; next-level-cache = <&L2_1>; }; cpu4: PowerPC,e6500@8 { device_type = "cpu"; reg = <8 9>; + clocks = <&mux1>; next-level-cache = <&L2_2>; }; cpu5: PowerPC,e6500@10 { device_type = "cpu"; reg = <10 11>; + clocks = <&mux1>; next-level-cache = <&L2_2>; }; cpu6: PowerPC,e6500@12 { device_type = "cpu"; reg = <12 13>; + clocks = <&mux1>; next-level-cache = <&L2_2>; }; cpu7: PowerPC,e6500@14 { device_type = "cpu"; reg = <14 15>; + clocks = <&mux1>; next-level-cache = <&L2_2>; }; cpu8: PowerPC,e6500@16 { device_type = "cpu"; reg = <16 17>; + clocks = <&mux2>; next-level-cache = <&L2_3>; }; cpu9: PowerPC,e6500@18 { device_type = "cpu"; reg = <18 19>; + clocks = <&mux2>; next-level-cache = <&L2_3>; }; cpu10: PowerPC,e6500@20 { device_type = "cpu"; reg = <20 21>; + clocks = <&mux2>; next-level-cache = <&L2_3>; }; cpu11: PowerPC,e6500@22 { device_type = "cpu"; reg = <22 23>; + clocks = <&mux2>; next-level-cache = <&L2_3>; }; }; -- 1.8.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html