On 09/10/13 05:38, Simon Horman wrote:
On Tue, Oct 08, 2013 at 02:58:08PM +0900, Magnus Damm wrote:
On Tue, Oct 8, 2013 at 2:32 PM,<takasi-y@xxxxxxxxxxxxx> wrote:
Device tree clock binding document for EMMA Mobile EV2 SMU,
And Common clock framework based implementation of it.
Following nodes are defined to describe clock tree.
- renesas,emev2-smu
- renesas,emev2-smu-clkdiv
- renesas,emev2-smu-gclk
These bindings are designed manually based on
19UH0037EJ1000_SMU : System Management Unit User's Manual
So far, reparent is not implemented, and is fixed to index #0.
Clock tree description is not included, and should be provided
by device-tree.
Signed-off-by: Takashi Yoshii<takasi-y@xxxxxxxxxxxxx>
---
.../devicetree/bindings/clock/emev2-clock.txt | 98 +++++++++++++++++++
drivers/clk/Makefile | 1 +
drivers/clk/shmobile/Makefile | 3 +
drivers/clk/shmobile/clk-emev2.c | 104 +++++++++++++++++++++
4 files changed, 206 insertions(+)
Thanks for cleaning up the Makefile bits, Yoshii-san.
This patch and the bindings look fine to me from a SoC point of view.
Using these together with the topology information in emev2.dtsi makes
it possible for us to use CCF and multiplatform as expected on the
EMEV2 SoC.
Acked-by: Magnus Damm<damm@xxxxxxxxxxxxx>
Thanks. I will send a pull request for this change to Mike Turquette.
I was going to comment on the last set but forgot.
My set dealt with the following issues
This set does not have any of the module clocks, which I added
in mine. This is also an issue with the clock and serial drivers
which do not ensure the bus/module clocks have been enabled in
the driver.
Mine also dealt with the multiple parents that some of these
clocks have.
I can try and re-post tonight for discussion.
--
Ben Dooks http://www.codethink.co.uk/
Senior Engineer Codethink - Providing Genius
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
