Hi Stan,
On Mon, 2013-10-07 at 12:28 +0300, Stanimir Varbanov wrote:
> Hi Ivan,
>
> Minor comments below.
>
> On 10/07/2013 10:44 AM, Ivan T. Ivanov wrote:
> > From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
> >
> > DWC3 glue layer is hardware layer around Synopsys DesignWare
> > USB3 core. Its purpose is to supply Synopsys IP with required
> > clocks, voltages and interface it with the rest of the SoC.
> >
> > Signed-off-by: Ivan T. Ivanov <iivanov@xxxxxxxxxx>
> > ---
> > drivers/usb/dwc3/Kconfig | 8 +++
> > drivers/usb/dwc3/Makefile | 1 +
> > drivers/usb/dwc3/dwc3-msm.c | 168 +++++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 177 insertions(+)
> > create mode 100644 drivers/usb/dwc3/dwc3-msm.c
> >
> > diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
> > index 70fc430..4c7b5a4 100644
> > --- a/drivers/usb/dwc3/Kconfig
> > +++ b/drivers/usb/dwc3/Kconfig
> > @@ -59,6 +59,14 @@ config USB_DWC3_EXYNOS
> > Recent Exynos5 SoCs ship with one DesignWare Core USB3 IP inside,
> > say 'Y' or 'M' if you have one such device.
> >
> > +config USB_DWC3_MSM
> > + tristate "Qualcomm MSM/APQ Platforms"
> > + default USB_DWC3
> > + select USB_MSM_DWC3_PHYS
> > + help
> > + Recent Qualcomm SoCs ship with one DesignWare Core USB3 IP inside,
> > + say 'Y' or 'M' if you have one such device.
> > +
> > config USB_DWC3_PCI
> > tristate "PCIe-based Platforms"
> > depends on PCI
> > diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
> > index dd17601..a90de66 100644
> > --- a/drivers/usb/dwc3/Makefile
> > +++ b/drivers/usb/dwc3/Makefile
> > @@ -31,4 +31,5 @@ endif
> >
> > obj-$(CONFIG_USB_DWC3_OMAP) += dwc3-omap.o
> > obj-$(CONFIG_USB_DWC3_EXYNOS) += dwc3-exynos.o
> > +obj-$(CONFIG_USB_DWC3_MSM) += dwc3-msm.o
> > obj-$(CONFIG_USB_DWC3_PCI) += dwc3-pci.o
> > diff --git a/drivers/usb/dwc3/dwc3-msm.c b/drivers/usb/dwc3/dwc3-msm.c
> > new file mode 100644
> > index 0000000..1d73f92
> > --- /dev/null
> > +++ b/drivers/usb/dwc3/dwc3-msm.c
> > @@ -0,0 +1,168 @@
> > +/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 and
> > + * only version 2 as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/err.h>
> > +#include <linux/io.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_platform.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/regulator/consumer.h>
> > +#include <linux/usb/phy.h>
> > +
> > +struct dwc3_msm {
> > + struct device *dev;
> > +
> > + struct clk *core_clk;
> > + struct clk *iface_clk;
> > + struct clk *sleep_clk;
> > + struct clk *utmi_clk;
> > +
> > + struct regulator *gdsc;
> > +};
> > +
> > +static int dwc3_msm_probe(struct platform_device *pdev)
> > +{
> > + struct device_node *node = pdev->dev.of_node;
> > + struct dwc3_msm *mdwc;
> > + struct resource *res;
> > + void __iomem *tcsr;
> > + int ret = 0;
> > +
> > + mdwc = devm_kzalloc(&pdev->dev, sizeof(*mdwc), GFP_KERNEL);
> > + if (!mdwc)
> > + return -ENOMEM;
> > +
> > + platform_set_drvdata(pdev, mdwc);
> > +
> > + mdwc->dev = &pdev->dev;
> > +
> > + mdwc->gdsc = devm_regulator_get(mdwc->dev, "gdsc");
> > +
> > + mdwc->core_clk = devm_clk_get(mdwc->dev, "core");
> > + if (IS_ERR(mdwc->core_clk)) {
> > + dev_dbg(mdwc->dev, "failed to get core clock\n");
> > + return PTR_ERR(mdwc->core_clk);
> > + }
> > +
> > + mdwc->iface_clk = devm_clk_get(mdwc->dev, "iface");
> > + if (IS_ERR(mdwc->iface_clk)) {
> > + dev_dbg(mdwc->dev, "failed to get iface clock\n");
> > + return PTR_ERR(mdwc->iface_clk);
> > + }
> > +
> > + mdwc->sleep_clk = devm_clk_get(mdwc->dev, "sleep");
> > + if (IS_ERR(mdwc->sleep_clk)) {
> > + dev_dbg(mdwc->dev, "failed to get sleep clock\n");
> > + return PTR_ERR(mdwc->sleep_clk);
> > + }
> > +
> > + mdwc->utmi_clk = devm_clk_get(mdwc->dev, "utmi");
> > + if (IS_ERR(mdwc->utmi_clk)) {
> > + dev_dbg(mdwc->dev, "failed to get utmi clock\n");
> > + return PTR_ERR(mdwc->utmi_clk);
> > + }
>
> I'm not sure that those dev_dbg() are useful at all.
They are, if you deal with WIP clocks and regulators implementations,
which is the case for this platform.
>
> > +
> > + if (!IS_ERR(mdwc->gdsc)) {
> > + ret = regulator_enable(mdwc->gdsc);
> > + if (ret)
> > + dev_err(mdwc->dev, "cannot enable gdsc\n");
> > + }
> > +
> > + /*
> > + * DWC3 Core requires its CORE CLK (aka master / bus clk) to
> > + * run at 125Mhz in SSUSB mode and >60MHZ for HSUSB mode.
> > + */
> > + clk_set_rate(mdwc->core_clk, 125000000);
> > + clk_prepare_enable(mdwc->core_clk);
> > + clk_prepare_enable(mdwc->iface_clk);
> > + clk_prepare_enable(mdwc->sleep_clk);
> > + clk_prepare_enable(mdwc->utmi_clk);
>
> All function calls above could return errors. Aren't those clocks fatal?
Yes, errors are fatal, I will add checks here.
>
> regadrs,
> Stan
>
Thanks,
Ivan
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
